Abstract:In order to study the cumulative damage and failure characteristics of long spiral belled pile under horizontal cyclic loading of offshore wind and waves, a series of indoor experiments on single piles under horizontal cyclic load were carried out. The cycle times as well as load amplitude at the same frequency were considered during the horizontal pseudo-static cyclic tests. On the basis of the distribution of pile deflection, bending moment, and Earth pressure around the pile, the pile-soil interaction was comprehensively discussed. The cumulative energy dissipation characteristics were introduced to describe the damage of test piles. Meanwhile, the effects of load amplitude and cycle times on the cumulative damage of long spiral belled piles were discussed. A power function model for energy dissipation coefficient prediction under multi-stage cyclic load was proposed. The results show that the horizontal peak bearing capacity of long spiral belled pile is increased by 57.2% and 40.4%, respectively, as compared with the straight pile and belled pile under the same conditions. The horizontal displacement mainly occurs at the upper part of the pile. Under the condition of limited cyclic times, the load amplitude has more significant effect on the bearing characteristics of the long spiral belled pile. In contrast to the straight pile and belled pile, the long spiral belled pile has better energy dissipation capacity, and the rank of the energy dissipation capacity of these three piles is long spiral belled pile > belled pile > straight pile. The power function model can well reflect the cumulative damage characteristics of long spiral belled pile under horizontal cyclic loading, and there is a good linear relationship between power function model parameters and load amplitude. The energy dissipation coefficient of long spiral belled pile with diverse cycle times at different mechanical stages of test pile is analysed. Then, the recommended power function model parameters according to different failure stages are proposed. The verification example indicates that the prediction results are close to the measured values with a calculation error of 22%. The prediction model can provide a certain reference for the application of long spiral belled pile in marine structures.

The Cumulative Damage Evolution Law Of Multi-Anchor Circular Piles Reinforced Landslide Under Earthquake Action

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Dynamic P-△ Effects on Seismic Force Modification Factors

Experimental Studies on Seismic Behavior of Steel Pile-to-Pile-Cap Connections

Low-Cycle Fatigue Test of Circular Concrete Filled Tubular Columns

Assessment of Cohesive Soil Landslide Driving Forces Exerted on Piles Considering Soil Arching Effects

INFLUENCE OF ANCHORAGE DEPTH ON MECHANICAL BEHAVIOUR OF DOUBLE-ROW ANTI-SLIDE PILES

Lateral Deformation Prediction Model of Pile Foundation in Liquefiable Site

Analysis method for pile groups subjected to lateral and torsional loads

Centrifuge Model Test Study on Pile Reinforcement Behavior of Cohesive Soil Slopes under Earthquake Conditions

Cumulative Damage Evolution Rule of Rock Slope Based on Shaking Table Test Using VMD-HT

Study on cumulative damage of structure under strong earthquake excitation based on Wenchuan earthquake analysis

Seismic displacement of bedding slopes stabilized with anchor cables and piles considering dynamic yield acceleration

Seismic performance of a nonhomogeneous slope reinforced by anchored piles using centrifuge tests

Mechanism and control of progressive collapse of tied-back excavations induced by local anchor failure

Deformation field evolution characteristics of layered cemented paste backfill and strength prediction based on ultrasonic pulse velocity

Analysis of Cumulative Damage Characteristics of Long Spiral Belled Pile under Horizontal Cyclic Loading at Sea

Bedding slope damage accumulation induced by multiple earthquakes

Damage Evolution of Rock Slopes under Seismic Motions Using Shaking Table Test

Shaking Table Model Tests and Stability Analysis of Slopes Reinforced with New Anti-Seismic Anchor Cables