Abstract:Currently, cutting-edge Additive Manufacturing techniques, such as Selective Laser Melting (SLM) and Electron Beam Melting (EBM), offer manufacturers a valuable avenue, especially in biomedical devices. These techniques produce intricate porous structures that draw inspiration from nature, boast biocompatibility, and effectively counter the adverse issues tied to solid implants, including stress shielding, cortical hypertrophy, and micromotions. Within the domain of such porous structures, Triply Periodic Minimal Surface (TPMS) configurations, specifically the Gyroid, Diamond, and Primitive designs, exhibit exceptional performance due to their bioinspired forms and remarkable mechanical and fatigue properties, outshining other porous counterparts. Consequently, they emerge as strong contenders for biomedical implants. However, assessing the mechanical properties and manufacturability of TPMS structures within the appropriate ranges of pore size, unit cell size, and porosity tailored for biomedical applications remains paramount. This study aims to scrutinize the mechanical behavior of Gyroid, Diamond, and Primitive structures in solid and sheet network iterations within the morphological parameter ranges suitable for tasks like cell seeding, vascularization, and osseointegration. A comparison with the mechanical characteristics of host bones is also undertaken. The methodology revolves around Finite Element Method (FEM) analysis. The six structures are originally modeled with unit cell sizes of 1, 1.5, 2, and 2.5 mm, and porosity levels ranging from 50% to 85%. Subsequently, mechanical properties, such as elasticity modulus and yield strength, are quantified through numerical analysis. The results underscore that implementing TPMS designs enables unit cell sizes between 1 and 2.5 mm, facilitating pore sizes within the suitable range of approximately 300-1500 μm for biomedical implants. Elasticity modulus spans from 1.5 to 33.8 GPa, while yield strength ranges around 20-304.5 MPa across the 50%-85% porosity spectrum. Generally, altering the unit cell size exhibits minimal impact on mechanical properties within the range above; however, it's noteworthy that smaller porosities correspond to heightened defects in additively manufactured structures. Thus, for an acceptable pore size range of 500-1000 μm and a minimum wall thickness of 150 μm, a prudent choice would involve adopting a 2.5 mm unit cell size.

Experimental evaluation of phase-field-based load-specific shape optimization of nature-inspired porous structures

Isotropic Porous Structure Design Methods Based on Triply Periodic Minimal Surfaces

Isogeometric Analysis-Based Topological Optimization for Heterogeneous Parametric Porous Structures.

A Phase Field-Based Systematic Multiscale Topology Optimization Method for Porous Structures Design

An Experimental and Numerical Investigation of Compressive Response of Designed Schwarz Primitive Triply Periodic Minimal Surface with Non-Uniform Shell Thickness

Thermal-mechanical coupling topology optimization of multi-phase infill structures with a non-gradient porosity optimization method

Design and mechanical performances of stress adaptive porous structures based on triply period minimal surface

Morphology, Flow and Heat Transfer in Triply Periodic Minimal Surface Based Porous Structures

TPMS-based interpenetrating lattice structures: Design, mechanical properties and multiscale optimization

Topology optimization of arbitrary-shape multi-phase structure with structured meshes based on a virtual phase method

Design procedure for triply periodic minimal surface based biomimetic scaffolds

Effective mechanical properties of additive manufactured triply periodic minimal surfaces: experimental and finite element study

Design of the Shell-Infill Structures Using a Phase Field-Based Topology Optimization Method

Efficient Representation and Optimization for TPMS-Based Porous Structures

Level-Set Topology Optimization for Ductile and Brittle Fracture Resistance Using the Phase-Field Method

Phase-field topology optimization with periodic microstructure

Investigating internal architecture effect in plastic deformation and failure for TPMS-based scaffolds using simulation methods and experimental procedure

Phase field topology optimisation for 4D printing

Exploring the optimal mechanical properties of triply periodic minimal surface structures for biomedical applications: A Numerical analysis

Full compression response of FG-based scaffolds with varying porosity via an effective numerical scheme

Mechanical behavior of interpenetrating phase composite structures based on triply periodic minimal surface lattices