Abstract:This study aims to propose a model for dynamically simulating the online-refueling process in pebble-bed reactor (PBR) using MCNPX. PBR has a special feature of online-refueling which can greatly reduce the outage time and enable a higher burnup in spent fuel. However, this feature also results in the dynamical fuel movements which may significantly increase the difficulty and the computational time in computer simulation. Therefore, an appropriate model is necessary to be proposed to simulate the burnup characteristics of online-refueling and to reduce the computational time simultaneously. All the calculations in this study were performed using MCNPX 2.7.0 with the ENDF/B-VII continuous energy nuclear data library. The PBR model was built according to the core design of HTR-10 but adopted some reasonable assumptions. The refueling process was emulated by utilizing the fuel loading scenario of the once through then out (OTTO) in combination with the layer-mixed-shell fuel movement. Additionally, the layer-mixed-shell fuel movement considered the concept of fuel channels, where the fuel pebbles only move in the same fuel channel, such that the burnup characteristics of fuel pebbles in both radial and axial direction can be identified separately. The core was divided into 9 fuel zones with a fixed volume and 3 fuel channels with a variety of fuel zones. Furthermore, the number of fuel zones in each fuel channel was determined based on the relative residence time of fuel pebbles in the core. The results revealed that the core can achieve an equilibrium fuel cycle after refueling several times, and after that all the core characteristics can nearly maintain unchanged between different cycles. Although the refueling process was modeled based on the OTTO fuel loading scenario instead of the multi-pass one, the discharged burnup can still reach the target burnup of the spent fuel for HTR-10, i.e. 72 GWd/tHM. In addition, the average discharged burnup under the equilibrium fuel cycle is approximate to 80 GWd/tHM, which also coincides the design value of the spent fuel for HTR-10. Therefore, the layer-mixed-shell movement model can consider the fuel movements in either radial or axial directions simultaneously and enable a more accurate prediction to the real refueling process of HTR-10 than our previous studies.

Perturbation algorithm for refueling reactivity coefficient in the pebble-bed high temperature reactor

The Depletion Reactivity Coefficient of the Pebble-Bed High Temperature Gas-Cooled Reactor Based on Perturbation Theory

Methodology of the On-line Follow Simulation of Pebble-bed High-temperature Reactors

Research on Fuel Pebble Modeling Methods Comparison and Eigenvalue Analysis of the Running-in Phase of HTR-PM

Integrated Parameter Mapping and Real-Time Optimization for Load Changes in High Temperature Gas-Cooled Pebble Bed Reactors

Study on the Curved Channel Model in the Initial Core Loading of Pebble Bed High Temperature Reactors

Burnup computations of online-refueling process for pebble-bed reactors using layer-mixed-shell fuel movement model

Temperature Perturbation Method Using On-the-fly Treatment of the Cross-Sections in the Resolved Resonance Region

Uncertainty and Sensitivity Analysis of Filling Fraction of Pebble Bed in Pebble Bed Htr

Physical Analysis of the Initial Core and Running-In Phase for Pebble-Bed Reactor HTR-PM

FISSION YIELD UNCERTAINTY PROPAGATION IN MULTI-PASS REFUELING PEBBLE-BED HTGR

Research on Reactivity-Equivalent Physical Transformation Method for Double Heterogeneity in Pressurized Water Reactors Based on Machine Learning

Research on the Induced Radioactivity of HTR-PM’s Reactor Pressure Vessel: A Comparative Study Between FLUKA, KORIGEN and QAD-CGA

Neutronics Analysis on High-Temperature Gas-Cooled Pebble Bed Reactors by Coupling Monte Carlo Method and Discrete Element Method

Research on the Fuel Loading Patterns of the Initial Core in Chinese Pebble-Bed Reactor HTR-PM

A proposed refueling scheme for the modular pebble bed reactor

Fuel Management of the HTR-10 Including the Equilibrium State and the Running-in Phase

Coupling of Rmc and Cfx for Analysis of Pebble Bed-Advanced High Temperature Reactor Core

Mechanism Analysis of the Contribution of Nuclear Data to the Keff Uncertainty in the Pebble Bed HTR

Random Geometry Capability in RMC Code for Explicit Analysis of Polytype Particle/pebble and Applications to HTR-10 Benchmark

Monte Carlo Simulation of Activity Concentration Measurement of Primary Coolant of High-Temperature Gas-Cooled Pebble-Bed Modular Reactor