Abstract:Carbon aerogels with excellent compressibility and resilience are attracting considerable attention in broad application prospects for their reversible resilience and resistance to damage from external stress. It is of great interest to explore green and low-cost carbon aerogels from sustainable resources but remains challenging because of the brittleness of carbon blocks. Herein, inspired by the anisotropic architectures in nature, we propose a bottom-up approach for fabricating an anisotropic carbon aerogel with a 3D lamellar structure from cellulose nanofibers. The aligned and continuous lamellar texture with desirable thickness (142 nm) can effectively transfer stress throughout the 3D network and resist the destruction at high compression, and thus, the carbon aerogel exhibits shape recovery from high compression strain and excellent fatigue resistance. The carbon aerogel can withstand extremely high compression strain (95%) for at least 50 cycles or 50,000 cycles at 50% strain with 84% height retention. Moreover, the excellent mechanical performance, stable 3D lamellar architecture, and high conductivity endow the carbon aerogel with rapid current response and high sensitivity in a wide pressure range (0.002–7 kPa). This study introduces the carbon aerogel as an excellent choice for fabricating the 3D tactile sensor to capture various signals of human motions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02051?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02051</a>.<a class="ref internalNav" href="#sec2">Experimental Section</a>; height of the CNF; FT-IR spectrum of the CNF; lamellar surfaces of CNF0.45%, CNF1.8%, CNF0.45%–C, and CNF1.8%–C; SEM images of aerogels before annealing; digital photographs of the as-prepared aerogels and carbon aerogels; XRD and Raman patterns of CNFX%–C; microstructures of CNF aerogels (CNF0.9%) before and after annealing; digital photographs of the as-prepared aerogels and carbon aerogels before and after compression; compressibility of CNFX%–C; SEM images of CNFX%–C after 10,000 cycles at 50% strain; lamellar thicknesses of CNFX%–C; R/R0 of CNF0.9%–C and its linear sensitivity; and comparison of pressure detection limit of CNF0.9%–C (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_001.pdf">PDF</a>)Compression at 90% strain for one cycle (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_002.mp4">MP4</a>)Finite element analysis of thin lamella (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_003.mp4">MP4</a>)Finite element analysis of thick lamella (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_004.mp4">MP4</a>)Finite element analysis of compression from the x direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_005.mp4">MP4</a>)Finite element analysis of compression from the y direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_006.mp4">MP4</a>)Finite element analysis of compression from the z direction (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02051/suppl_file/sc1c02051_si_007.mp4">MP4</a>)This article has not yet been cited by other publications.

Devisable pore structures and tunable thermal management properties of aerogels composed of carbon nanotubes and cellulose nanofibers with various aspect ratios

Mechanically Strong and Thermally Responsive Cellulose Nanofibers/Poly(N-isopropylacrylamide) Composite Aerogels

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Anisotropic cellulose nanofiber/chitosan aerogel with thermal management and oil absorption properties

Research in porous structure of cellulose aerogel made from cellulose nanofibrils

Nanocellulose-based aerogels with devisable structure and tunable properties via ice-template induced self-assembly

Multiscale Nanocelluloses Hybrid Aerogels for Thermal Insulation: the Study on Mechanical and Thermal Properties.

Electrically Conductive Aerogels Composed of Cellulose and Carbon Nanotubes

In Situ Cross-Linking Reinforced Cellulose Aerogel Fibers for Thermal Insulation and Multifunctional Applications

Ambient-drying to construct unidirectional cellulose nanofibers/ carbon nanotubes aerogel with ultra-lightweight, robust, and superior microwave absorption performance

Facile Preparation of Carbon Nanotube Aerogels with Controlled Hierarchical Microstructures and Versatile Performance

A Direct Foaming Approach for Carbon Nanotube Aerogels with Ultra-Low Thermal Conductivity and High Mechanical Stability.

Laminated Structural Engineering Strategy toward Carbon Nanotube-Based Aerogel Films

Anisotropic Carbon Aerogel from Cellulose Nanofibers Featuring Highly Effective Compression Stress Transfer and Pressure Sensing

Anisotropic nanocellulose aerogels with ordered structures fabricated by directional freeze-drying for fast liquid transport

Low-cost carbon nanotube aerogels with varying and controllable density

Ultra-light-weight, anti-flammable and water-proof cellulosic aerogels for thermal insulation applications

Scalable manufacturing of light, multifunctional cellulose nanofiber aerogel sphere with tunable microstructure for microwave absorption

Rational and Wide-Range Tuning of CNT Aerogel Conductors with Multifunctionalities

Preparation of Stable Carbon Nanotube Aerogels with High Electrical Conductivity and Porosity

Multifunctional Superelastic Cellulose Nanofibrils Aerogel by Dual Ice‐Templating Assembly