Abstract:Steel-basalt hybrid fibers reinforced cementitious composite (SBFRCC) is a potential reinforce-ment and repair material for engineering structures with fire risk due to its excellent mechanical properties exposed to ambient and high temperatures. However, the bonding properties between SBFRCC and existing concrete are still unclear, especially at high temperatures. To fill this gap, the bonding properties between SBFRCC and existing concrete at high temperatures were investigated based on two situations by using the slant shear and splitting tensile tests. First, the existing concrete was heated at high temperatures and then bonded with SBFRCC and strengthening concrete to form combined systems, respectively. The effects of the interface roughness, high temperature duration, and post-fire-curing on their bonding properties were investigated. Second, the existing concrete was bonded with SBFRCC and then heated at high temperatures, and the effects of fly ash substation rates on the bonding properties were studied. Besides, the backscattered-electron (BSE) was used to observe the interface between the exiting concrete and SBFRCC exposed to various temperatures. Results show that the first bonded and then heated specimens are slide-failed and separated at the bonding interface from room tem-perature to 600 degrees C, while the damage is generated within the existing concrete at 800 degrees C. SBFRCC has better high temperature resistance than the existing concrete. The slant shear and splitting tensile strengths between PC-A and SBFRCC are 9%-33.3% higher than that of PC-A and strengthening concrete at all temperatures. The appropriate roughness at the interface by pol-ishing can significantly improve the bonding properties between the existing concrete and SBFRCC. The bonding strength is recovered by more than 18.2% and 29.8% after the post-fire curing of 28 and 90 d, respectively. The increase of fly ash substitution rates has a certain contribution to the bonding properties above 600 degrees C.

Effects of Solution Temperature on the Galvanic Corrosion Between Carbon Fiber and Carbon Steel SM490A

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Experimental study on dynamic behavior of CFRP-to-steel interface

High-Temperature Mechanical Properties of Artificially Simulated Corroded Q500MC Structural Steel

Effect of Temperature on Corrosion of Carbon Steel in Simulated Concrete Pore Solution under Anoxic Conditions

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Effects of High Temperature and Substitution Rates of Fly Ash on the Mechanical Properties and Microstructures of Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites

Study on thermal effects on fatigue behavior of cracked steel plates strengthened by CFRP sheets

Effect of Temperature on Material Properties of Carbon Fiber Reinforced Polymer (CFRP) Tendons: Experiments and Model Assessment

Effects of Temperature on Galvanic Corrosion Behaviors of Super 13Cr and P110 Steel Couples in NaCl Solution

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Effects of Temperature on CO2 Corrosion of X70 Steel under Multiphase Flow Condition

Mechanical Performance of Artificially Rusted Q500MC Structural Steel Subjected to High Temperature

Bonding Properties Between Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites and Existing Concrete at High Temperatures

Bonding Behavior and Mechanism of Composite Interface Between Carbon Steel/Stainless Steel Laminates at Different Temperatures and Strain Rates

Mechanical Behavior and Design of FRP Structural Members at High and Low Service Temperatures

Bond Relationship of Carbon Fiber-Reinforced Polymer (CFRP) Strengthened Steel Plates Exposed to Service Temperature

High-Temperature Effect on the Tensile Mechanical Properties of Unidirectional Carbon Fiber-Reinforced Polymer Plates

Effects of Temperature on the Fibre Matrix Interfacial Shear Strength of Carbon Nanotube Grafted Carbon Fibre Reinforced Heat Resistant Resin

Investigation on Galvanic Corrosion Behaviors of CFRPs and Aluminum Alloys Systems for Automotive Applications