Abstract:Microscale fiber-based supercapacitors have become increasingly important for the needs of flexible, wearable, and lightweight portable electronics. Fiber electrodes without pre-existing cores enable a wider selection of materials and geometries than is possible through core-containing electrodes. The carbonization of fibrous precursors using an electrically driven route, different from a conventional high-temperature process, is particularly promising for achieving this structure. Here, we present a facile and low-cost process for producing high-performance microfiber supercapacitor electrodes based on carbonaceous materials without cores. Fibrous carbon nanotubes-agarose composite hydrogels, formed by an extrusion process, are converted to a composite fiber consisting of carbon nanotubes (CNTs) surrounded by an amorphous carbon (aC) matrix via Joule heating. When assembled into symmetrical two-electrode cells, the composite fiber (aC-CNTs) supercapacitor electrodes deliver a volumetric capacitance of 5.1 F cm−3 even at a high current density of 118 mA cm−3. Based on electrochemical impedance spectroscopy analysis, it is revealed that high electrochemical properties are attributed to fast response kinetics with a characteristic time constant of 2.5 s. The aC-CNTs fiber electrodes exhibit a 94% capacitance retention at 14 mA cm−3 for at least 10,000 charge-discharge cycles even when deformed (90° bend), which is essentially the same as that (96%) when not deformed. The aC-CNTs fiber electrodes also demonstrate excellent storage performance under mechanical deformation—for example, 1000 bending-straightening cycles.

Active Material‐Free Continuous Carbon Nanotube Fibers with Unprecedented Enhancement of Physicochemical Properties for Fiber‐Type Solid‐State Supercapacitors (Adv. Energy Mater. 6/2024)

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Fabricating Continuous Supercapacitor Fibers with High Performances by Integrating All Building Materials and Steps into One Process

Joule Heating-Induced Carbon Fibers for Flexible Fiber Supercapacitor Electrodes

Scalable synthesis of hierarchically structured carbon nanotube–graphene fibres for capacitive energy storage

Vaporized Hydrothermal Functionalization of Carbon Fiber and Its Superior Supercapacitor Performance

Free-standing carbon nanofiber fabrics for high performance flexible supercapacitor

Amphiphilic Core-Sheath Structured Composite Fiber for Comprehensively Performed Supercapacitor

A Solid-State Fibriform Supercapacitor Boosted by Host-Guest Hybridization between the Carbon Nanotube Scaffold and MXene Nanosheets.

High-Energy–Density Fiber Supercapacitors Based on Transition Metal Oxide Nanoribbon Yarns for Comprehensive Wearable Electronics

Flexible All-Solid-State Supercapacitor Fabricated with Nitrogen-Doped Carbon Nanofiber Electrode Material Derived from Polyacrylonitrile Copolymer

3D Architecturing Strategy on the Utmost Carbon Nanotube Fiber for Ultra‐High Performance Fiber‐Shaped Supercapacitor

Preparation of Advanced Multi-Porous Carbon Nanofibers for High-Performance Capacitive Electrodes in Supercapacitors

Carbon Nanotube Based Fiber Supercapacitor as Wearable Energy Storage

Carbon nanotubes and manganese oxide hybrid nanostructures as high performance fiber supercapacitors

Electrochemical Performance of Flexible Graphene-Based Fibers As Electrodes for Wearable Supercapacitors

Carbon Nanotube Reinforced Structural Composite Supercapacitor

In-situ growth of vertically aligned nickel cobalt sulfide nanowires on carbon nanotube fibers for high capacitance all-solid-state asymmetric fiber-supercapacitors

High-performance MnO2@MXene/carbon nanotube fiber electrodes with internal and external construction for supercapacitors

100 m Long Thermally Drawn Supercapacitor Fibers with Applications to 3D Printing and Textiles