Abstract:Laser shock ablation is incorporated into laser shock imprinting for the fabrication of papillary composite microstructures on aluminum surfaces. The primary papillary structures are fabricated using laser shock imprinting. Subsequently, secondary structures were fabricated on the surface of these primary structures using laser shock ablation, forming composite papillary microstructures. The influence of various laser shock ablation process parameters on the formation effect of these papillary composite microstructure surfaces was investigated. The results indicate that both laser shock energy and shock frequency affect the integrity of the secondary microstructure coverage on the material surface, the height of the composite microstructure, and the surface morphology. Through comparative optimization, the optimal process parameters were determined to be 675 mJ of energy and one shock ablation. Additionally, the differences in the flow behavior of metallic materials between the center and the periphery of the beam spot, caused by the shock wave, were analyzed. The wettability of the composite microstructure aluminum surface was also explored. The variation mechanism of wettability was explained by detecting changes in the contact angle on the aluminum surface at different time intervals and analyzing changes in surface chemical composition before and after aging. Specifically, after laser shock ablation, the aluminum surface contains a large number of polar groups, making it hydrophilic. During aging treatment, these polar groups continuously adsorb non-polar alkyl organic compounds, eventually leading to hydrophobicity, with a stabilized average surface contact angle of 143°. Fluorination treatment can further achieve superhydrophobicity, with a contact angle of 151° achieved shortly after processing the composite microstructure aluminum surface.

Hydrophilic properties of the aluminum alloy induced by femtosecond laser structuring

Parametric investigation of ultrashort pulsed laser surface texturing on aluminium alloy 7075 for hydrophobicity enhancement

Laser-induced selective wettability transition of 6061 aluminum alloy surfaces

Effect of femtosecond laser processing atmosphere on micro-nano structures and wetting properties of Ti6Al4V surface

Theoretical and experimental investigation on superhydrophobic structure fabricated by femtosecond laser on alumina ceramics

Controllable Construction and Corrosion Resistance Mechanism of Durable Superhydrophobic Micro-Nano Structure on Aluminum Alloy Surface

Molding Wetting by Laser-Induced Nanostructures

Superhydrophilicity to Superhydrophobicity Transition of Picosecond Laser Microstructured Aluminum in Ambient Air.

Influence of laser fluences and scan speeds on the morphologies and wetting properties of titanium alloy

Anti-corrosion superhydrophobic surfaces of Al alloy based on micro-protrusion array structure fabricated by laser direct writing

Wettability transition modes of aluminum surfaces with various micro/nanostructures produced by a femtosecond laser

Scalable Wettability Modification of Aluminum Surface through Single-Shot Nanosecond Laser Processing

Enhancing Anticorrosion Resistance of Aluminum Alloys Using Femtosecond Laser-Based Surface Structuring and Coating

Fabrication of Papillary Composite Microstructured Aluminum Surfaces by Laser Shock Imprinting and Ablation

Rapid fabrication of anti-corrosion and self-healing superhydrophobic aluminum surfaces through environmentally friendly femtosecond laser processing

Preparation of a superhydrophobic aluminium alloy surface by UV laser

Fabrication of wear-resistant and superhydrophobic aluminum alloy surface by laser-chemical hybrid methods

Investigations on electrochemical corrosion behavior of 7075 aluminum alloy with femtosecond laser modification

Super anti-corrosion surface of Al-Li alloy via femtosecond laser ablation treatment in water

Microconical surface structuring of aluminium tubes by femtosecond laser processing

Wetting and tribological properties of superhydrophobic aluminum surfaces with different water adhesion