Quantifying the Microdistribution of Different Fluid Types in the Multiscale Pore Throat Structure of Low-Permeability Conglomerates

Weichao Tian,Shuangfang Lu,Zhigang Wen,Xiu Chen,Yang Gao,Yang Li
DOI: https://doi.org/10.1021/acs.energyfuels.3c00822
IF: 4.6541
2023-06-16
Energy & Fuels
Abstract:The volumes of different fluid types and the pore throat structure in low-permeability reservoirs are crucial parameters for understanding flow mechanisms and predicting production performance. The previously applied methods for distinguishing different fluid types are mainly based on T 2 spectra under saturated, centrifugal, and heat-treated conditions. However, for rocks with different mineral compositions and pore structures, the critical temperature between capillary-bound fluid (CAF) and clay-bound fluid (CLF) differs from 60 to 100 °C. Moreover, the alteration of temperature can cause the transformation of clay minerals and a change in a nanopore structure. Herein, an improved method that integrates nuclear magnetic resonance (NMR) tests (n-dodecane-saturated, centrifugal, and spontaneous imbibition treatment conditions) and multicycle mercury intrusion porosimetry, was proposed for quantitatively evaluating the microdistributions of different fluid types, classifying the pore throat system, and analyzing the relationship between pore throat structure and different fluid types in low-permeability conglomerates. Based on the fractal characteristics and mercury intrusion/extrusion characteristics of pore throats at different scales, the pore throat system in these conglomerates was divided into macropore throats (>1 μm), mesopore throats (0.2–1 μm), and micropore throats (<0.2 μm). Macropore throats are connected to intergranular pores (>100 ms); mesopore throats are mostly connected to intergranular pores and intragranular dissolved pores (>10 ms); and micropore throats are connected to intragranular dissolved pores (<10 ms) and clay-related pores (<3 ms). The proportions of movable fluid, CAF, and CLF in the low-permeability conglomerates are 20.4–57.4%, 6.67–32.2%, and 36.0–47.4%, respectively. The movable fluids are mainly distributed in macropore throats and mesopore throats. CAF mainly exists in the micropore throats (pore throat radius <0.2 μm and pore size <10 ms). CLF is mainly distributed in pores with T 2 < 3 ms, that is clay-related pores. The improved method of fluid typing is suitable for low-permeability or tight clastic reservoirs (excluding shale).
energy & fuels,engineering, chemical
What problem does this paper attempt to address?