Abstract:The pore structure and movable fluid characteristics of tight conglomerate reservoirs are complex, which are greatly different from conventional reservoirs. The depositional mechanism is the fundamental factor controlling the physical properties of conglomerate reservoirs. However, there is a lack of systematic research on the pore structure and movable fluid characteristics of conglomerate reservoirs with typical sedimentary facies. This paper investigates the pore structure and movable fluid characteristics of conglomerate of different sedimentary facies based on various experiments. Casting thin sections, X-ray diffraction, scanning electron microscopy, high-pressure mercury injection, and nuclear magnetic resonance experiments were conducted on 32 conglomerates samples from the Mahu Sag, Junggar Basin, China. The quality classification method of tight conglomerate reservoirs is established. The results show that the conglomerate can be divided into three sedimentary facies; traction flow conglomerate (TFC) and pebbled sandstone (PSS) mainly develop intergranular pores and dissolved pores; and the pore diameter curves are mainly a double peak, single peak, and flat peak. Gravity flow conglomerate (GFC) mainly develops dissolved pores and interstitial micropores, and the pore diameter curve is mainly a single peak. PSS includes pebbled gritty sandstone (P(G)SS) and pebbled fine sandstone (P(F)SS). TFC and P(G)SS are favorable class I reservoirs, while GFC and P(F)SS are nonfavorable class II reservoirs. A new parameter, the ratio of the major axis to the minor axis of the pore outer ellipse (axial ratio), is proposed to quantitatively describe the compaction effect. The average axial ratios of the three lithofacies are 3.04, 3.98, and 8.78, respectively, indicating that the compaction is intensified and the pore structure becomes worse. By analyzing the correlation between pore structure parameters and permeability, it is found that the main controlling factors of permeability of GFC and TFC are sorting and connectivity, respectively, and the main flow radius is the most suitable parameter to describe permeability. A linear spectral decomposition method was used to establish a new quantitative calculation method of movable fluid saturation for different types of pores, and the results show that the movable fluid saturation of intergranular pores is the highest (average: 65.43%), and the movable fluid saturation of TFC and P(G)SS with more intergranular pores is the highest. Movable fluid saturation is inversely proportional to the content of I/S and the compaction rate and positively proportional to the content of quartz and feldspar and the cementation rate. The fluid mobility of water-wet samples is weaker. The research results provide theoretical support for the identification of favorable reservoirs and the cognition of a development mechanism.This article has not yet been cited by other publications.

Quantifying the control of pore types on fluid mobility in low-permeability conglomerates by integrating various experiments

Quantifying the Microdistribution of Different Fluid Types in the Multiscale Pore Throat Structure of Low-Permeability Conglomerates

Pore‐Scale Controls on the Gas and Water Transport in Hydrate‐Bearing Sediments

Controlling factors of fluid mobility in the tuff reservoirs of the Huoshiling formation, Dehui fault depression, southeastern Songliao Basin: insights from micro-nano pore structures

Multi-Scale Fractal Characteristics of the Pore System in Low-Permeability Conglomerates from the Junggar Basin

Pore Structure and Movable Fluid Characteristics of Typical Sedimentary Lithofacies in a Tight Conglomerate Reservoir, Mahu Depression, Northwest China

Controlling Effects of Tight Reservoir Micropore Structures on Seepage Ability: A Case Study of the Upper Paleozoic of the Eastern Ordos Basin, China

Occurrence characteristics and controls over mobile fluids in a tight sandstone reservoir

Occurrence Characteristics and Threshold Pore Throat Radius of Movable Fluids for Dolomite Intercrystalline Pores of Lacustrine Carbonate Rocks

Multi-Scale Quantitative Characterization of Pore Distribution Networks in Tight Sandstone by Integrating FE-SEM, HPMI, and NMR with the Constrained Least Squares Algorithm

Microscopic Pore Structure and Macroscopic Fluid Flow-Chemical Transport in Host Rocks and Barrier Materials

Pore structure and physical properties of sandy conglomerate reservoirs in the Xujiaweizi depression, northern Songliao Basin, China

Making sense of pore systems and the diagenetic impacts in the Lower Triassic porous dolostones, northeast Sichuan Basin

Impacts of the Pore–Throat Structure on Fluid Mobility in Tight Sandstone: Insight from an Improved Method Based on Rate-Controlled Porosimetry and Nuclear Magnetic Resonance

NMR characterization of fluid mobility in tight sand: Analysis on the pore capillaries with the nine-grid model

Pore Characterization and Its Controlling Factors in the Wufeng-Longmaxi Shale of North Guizhou, Southwest China

Using digital cores and nuclear magnetic resonance to study pore-fracture structure and fluid mobility in tight volcanic rock reservoirs

Comprehensive Multi-Method Characterization of Pore Structure and Its Impact on Fluid Mobility of Tight Sandstones—A Case Study of the Shaximiao Formation in the Central Sichuan Basin

Experimental study on non-Darcy flow characteristics in conglomerate porous medium

Pore characteristic responses to categories of depositional microfacies of delta-lacustrine tight reservoirs in the Upper Triassic Yanchang Formation, Ordos Basin, NW China

Fluid-rock Interactions and Porosity Genesis in Deep Clastic Reservoirs: A Perspective of Differential Oil Charge Intensity