Abstract:Laminated ceramics have received widely scientific and commercial attention because their properties, such as mechanical properties and electrical properties, can be tailored by adjusting the structure, thickness and composition of the different layers. For example, ferroelectric Bi4Ti3O12 (BIT) which has a positive temperature coefficient of dielectric constant (T.) can be used to modify the negative tau(epsilon) of typical microwave dielectric ceramic BaNd2Ti4O12 (BNT). However, BaNd2Ti4O12/Bi4Ti3O12/BaNd2Ti4O12 (BNT/BIT/BNT) laminated ceramics could not be prepared by the general method because the optimal sintering temperature of BaNd2Ti4O12 ceramic (around 1350degreesC) was much higher than that of Bi4Ti3O12 ceramic (around 1100degreesC). In this research, a new method of spark plasma sintering (SPS) combined with post-sintering was successfully proposed to prepare BNT/BIT/BNT laminated ceramics. It was divided into three steps. In first step, the BaNd2Ti4O12 ceramics were prepared by conventional sintering method. In second step, the calcined and pre-pressed Bi4Ti3O12 powders were sandwiched between BaNd2Ti4O12 ceramic pellets and spark plasma sintered at 900degreesC for 10min to synthesize BNT/BIT/BNT composite ceramics. In the last step, a post-sintering was employed to reoxidize the partially reduced BNT/BIT/BNT composite ceramics. The results of scanning electron microscopy (SEM) and electron probe microanalysis (EPMA) showed that BNT layer and BIT layer were well bonded and no significant interfacial infiltration between them was observed. The-sandwiched BNT/BIT/BNT ceramic with 10.7% BIT in volume has a dielectric constant of 92.8, a low dielectric loss of 0.0068 and a small temperature coefficient of dielectric constant of 35. ppm/degreesC at 1 MHz.

Direct selective laser sintering of hexagonal barium titanate ceramics

Direct selective laser sintering of high-entropy carbide ceramics

Enhanced Dielectric Strength and Energy Storage Density in BaTi 0.7 Zr 0.3 O 3 Ceramics Via Spark Plasma Sintering

The Effect of B2o3-Li2co3 Addition on Sintering Behavior and Dielectric Properties of Ba0.6sr0.4tio3 Ceramics

Fabrication of BaNd2Ti4O12/Bi4Ti3O12/BaNd2Ti4O12 laminated ceramics by spark plasma sintering

Doping Effects In (Ba0.85ca0.15)(Hf0.1ti0.9)O-3 Lead-Free Piezoelectric Ceramics Prepared Via Powder Injection Moulding Using Simple Binder

Directly fabricated Al2O3/GdAlO3 eutectic ceramic with large smooth surface by selective laser melting: Rapid solidification behavior and thermal field simulation

Low-Fire Processing of BaTiO3 with BaCuO2–CuO

Ultrafast high-temperature sintering of barium titanate ceramics with colossal dielectric constants

Fabrication and characteristics of fine-grained BaTiO3 ceramics by spark plasma sintering

Combustion synthesis and spark plasma sintering processing of (1‐x)Ba(Zr0.2Ti0.8)O3‐x(Ba0.7Ca0.3)TiO3 ceramics

Effect of the particle size on the performance of BaTiO3 piezoelectric ceramics produced by additive manufacturing

Performance of Ti6Al4V fabricated by electron beam and laser hybrid preheating and selective melting strategy

Direct Laser Powder-Bed Fusion Additive Manufacturing of Complex-Shaped TiB2-B4C Composite with Ultra-Fine Eutectic Microstructure and Outstanding Mechanical Performances

A Binary Particle Self-Assembly Sintering Method to Realize Controllable Synthesis of Fine-Grained Barium Titanate Ceramics

Direct laser powder-bed fusion additive manufacturing of complex-shaped TiB 2 -B 4 C composite with ultra-fine eutectic microstructure and outstanding mechanical performances

Phase Transitions in Nanocrystalline Barium Titanate Ceramics Prepared by Spark Plasma Sintering

Designing Barium Titanate Ceramics with High Energy Storage and Mechanical Properties

From rapid prototyping to rapid firing: on the feasibility of high‐speed production for complex BaTiO3 components

Processing, Microstructure and Properties of Nanograin Barium Titanate Ceramics by Spark Plasma Sintering

Selective Laser Melting of High-Strength TiB2/AlMgScZr Composites: Microstructure, Tensile Deformation Behavior, and Mechanical Properties