Dynamic response analysis of a motor–gear transmission system considering the rheological characteristics of magnetorheological fluid coupling
Hang Gong,Ruizhi Shu,Yang Xiong,Zhengqiu Xie,Jin Huang,Rulong Tan,Qin Yin,Zheng Zou
DOI: https://doi.org/10.1007/s11071-023-08585-6
IF: 5.741
2023-06-22
Nonlinear Dynamics
Abstract:This study develops a method to suppress the mechanical vibrations of a motor–gear transmission system (MGTS) due to speed and external load variations. It also achieves soft starting of the drive motor using a magnetorheological fluid coupling (MRFC) with variable stiffness and damping instead of the traditional rigid coupling. Therefore, a mechanical–electromagnetic coupled dynamics model of an MGTS is established, which includes a drive motor, a gear transmission system, an MRFC, and a load. Based on the developed dynamics model, the effects of the MRFC on the dynamic response of the MGTS at different coil currents in the startup and stable operation stages of the drive motor are investigated. The results show that as the coil current increases, the coil current overshoot increases, and the overshoot duration is 0.125 s. When the current is 2.0 A, the coil current overshoot reaches a maximum, and the overshoot rate is 8.84%. Concurrently, when the coil current increases from 0.5 to 2.0 A, the magnetic field intensity in the MRF working area increases from 0.38 to 0.74 T, the torque increases from 70 to 115 N·m, and the response time of the MRFC reduces from 0.125 to 0.002 s. Moreover, the relative vibration center offset rates (RVCORs) in the x , y , and θ directions of nodes 4, 8, 10, and 15 gradually decrease with increasing coil current. However, these RVCORs reach maximum when the coil current is 2.0 A, with those in the x direction being 0.586%, 0.447%, 0.446%, and − 0.263%, respectively, and in the y direction being 0.586%, 0.451%, 0.497%, and − 0.264%, respectively. The RVCORs of the helical gear meshing node of the MGTS in the θ direction are 0.0722%. Furthermore, the maximum vibration amplitude reduction rates (MVARRs) in the x , y , and θ directions of nodes 4, 8, 10, and 15 gradually increase with increasing coil current. The MVARRs of each node reach the maximum when the coil current is 2.0 A; the MVARRs of nodes 4, 8, 10, and 15 in the x direction are 40.98%, 83.4%, 83.49%, and 2.17%, respectively, and those in the y direction are 64.4%, 83.4%, 83.46%, and 2.16%, respectively. The MVARRs of the helical gear meshing node in the θ direction have an MVARRs of 29.1%. Moreover, the vibration amplitudes of the gear meshing node decay the fastest in the θ direction, and the decay time reduces from 2.8 to 0.3 s when the coil current increases from 0.5 to 2.0 A.
engineering, mechanical,mechanics