Abstract:Considering the nonlinearity and uncertainty of a high-speed flexible parallel mechanism,a robust model predictive control strategy was presented to suppress the vibration response of the system.Piezoceramic patch actuator and strain gauge sensors were used.The finite element method and modal truncation technique were applied to obtain the dynamic model of the mechanism.The nonlinear,coupling factors and high-order modal effects existing in the dynamic model of the system were considered as disturbances.The modal force was treated as an uncertain disturbance and the measurement noise was considered.The predictive model of the system dynamic response was introduced and the output was forecasted by the model.A Kalman filter estimator was designed to estimate the state variables of the system.A standard quadratic programming optimization problem was formed where the performance index function minimizes a quadratic performance function.The constraints were the control input voltage and its change rate.The optimization problem was solved to obtain the optimal control output voltages and a rolling optimization control system was then constructed to suppress the vibration response of the system.The optimum placements of the actuators and sensors were determined by using the controllability index featured as actuating energy and the observability index featured as signal energy.Taking a novel 2-DoF parallel mechanism as an example,the experimental modal method was applied to obtain the first two natural frequencies and damping ratios.Comparing with the results obtained by the finite element method,it shows that the theoretical model is not accurate enough.Using dSPACE real-time simulation system and MATLAB/Simulink,the control system was built and the vibration control experimental study was carried out.The experimental results show the proposed controller can effectively suppress the vibration response,and the effectiveness and robustness of the controller was verified.

Explicit Model Predictive Control of Electromechanical Coupling System

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Explicit Hybrid Model Predictive Control of the Forward DC-DC Converter

A Model Reference Adaptive Sliding Mode Control for the Position Control of Permanent Magnet Synchronous Motor.

Implicit Generalized Predictive Control of an Active Magnetic Bearing System

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Cooperative Predictive Position Control of Dual-Motor System

Lyapunov-Based Fast Finite-State Model Predictive Control for Sensorless Three-Phase Four-Arm MMC

Vibration control of a high-speed flexible parallel mechanism based on model predictive control

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

All-coefficient Adaptive Control of Active Magnetic Bearing System Based on Characteristic Model

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Variable Gain Cross-Coupling Control System of Dual-Axis PM Synchronous Linear Motor Based on Model Predictive Speed and Current Integrated Controller

Accurate Motion Control of Linear Motors with Adaptive Robust Compensation of Nonlinear Electromagnetic Field Effect

-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study

Direct Optimization Based Compensation Adaptive Robust Control of Nonlinear Systems with State and Input Constraints

Cross-Coupling Predictive Control for Two Axes Synchronous Systems

Precise Position Adjustment of Automotive Electro-Hydraulic Coupling System with Parameter Perturbations

High-Precision Control For A Surface-Mounted Permanent Magnet Synchronous Motor Based On Inverse System Approach

Dynamic Decoupling Method Based on Motor Dynamic Compensation with Application for Precision Mechatronic Systems

A steady-state and dynamic response model for working characteristics prediction of the electromechanical transmission system including eddy-current magnetic coupler