Abstract:The global massive consumption of disposable face masks driven by the ongoing COVID-19 pandemic has emerged as a blooming disaster to both the land and marine environment that might last for generations. Growing public concerns have been raised over the management and control of this new form of plastic pollution, and one of the proposed sustainable solution is to use renewable and/or biodegradable resources to develop mask materials in order to minimize their environmental impacts. As a representative biodegradable polymer, polylactic acid (PLA) has been proposed as a promising candidate to produce non-woven face masks instead of those fossil-based polymers. To further explore the feasibility of this alternative mask material, the present work aims to study both the hydrolytic and bio-degradation behaviors of pure PLA-derived 3-ply disposable face masks at ambient temperature. Hydrolytic degradability was investigated at different pH conditions of 2, 7 and 13 with the whole piece of face mask soaked for regular timed intervals up to 8 weeks. Weight loss study showed neutral and acidic conditions had minimal effect on PLA masks, but rapid degradation occurred under basic conditions in the first week with a sharp 25% decrease in weight that slowly tapered off, coupled with solution pH dropping from 13 to 9.6. This trend was supported by mechanical property, bacterial filtration efficiency (BFE) and particulate filtration efficiency (PFE) studies. Masks soaked in basic conditions had their modulus and tensile strength dropped by more than 50% after 8 weeks where the middle layer reached 68% and 90% respectively just after 48 h, and BFE and PFE decreased by 14% and 43% respectively after 4 weeks, which was much more significant than those in neutral and acidic conditions. Base degradation was also supported by nuclear magnetic resonance (NMR) and fourier transform infrared (FTIR), which disclosed that only the middle layer undergo major degradation with random chain scission and cleavage of enol or enolate chain ends, while outer and inner layers were much less affected. Scanning electron microscopy (SEM) attributed this observation to thinner PLA fibers for the middle layer of 3-7 mu m diameter, which on average is 3 times smaller. This degradation was further supported by gel permeation chromatography (GPC) which saw an increase in lower molecular weight fragment Mw similar to 800 Da with soaking duration. The biodegradation behavior was studied under OECD 301F specification in sewage sludge environment. Similarly, degradation to the middle meltblown layer was more extensive, where the average weight loss and carbon loss was 25.8% and 25.7% respectively, double that of outer/inner spunbond layer. The results showed that the face masks did not completely disintegrate after 8 weeks, but small solubilized fragments of PLA formed in the biodegradation process can be completely mineralized into carbon dioxide without generation of secondary microplastic pollution in the environment. PLA masks are therefore a slightly greener option to consider in times of a pandemic that the world was caught unprepared; however future research on masks could be geared towards a higher degradability material that fully breaks down into non-harmful components while maintaining durability, filtration and protection properties for users. (C) 2021 Published by Elsevier B.V.

Can disposable masks be worn more than once?

Exploring Reusability of Disposable Face Masks: Effects of Disinfection Methods on Filtration Efficiency, Breathability, and Fluid Resistance

Can Masks Be Reused After Hot Water Decontamination During the COVID-19 Pandemic?

Feasibility of Reusing Surgical Mask Under Different Disinfection Treatments

Particle Filtration Efficiency, Breathability, and Reusability of Common Masks

On the durability of surgical masks after simulated handling and wear

Used disposable face masks are significant sources of microplastics to environment

COVID-19: Performance study of microplastic inhalation risk posed by wearing masks

Adverse environmental effects of disposable face masks due to the excess usage

Generation of environmental persistent free radicals (EPFRs) enhances ecotoxicological effects of the disposable face mask waste with the COVID-19 pandemic

Fabrication of a High-Performance and Reusable Planar Face Mask in Response to the COVID-19 Pandemic

Impact on the fitness of N95 masks with extended use/limited reuse and dry heat decontamination

Developing home-disinfection and filtration efficiency improvement methods for N95 respirators and surgical facial masks: stretching supplies and better protection during the ongoing COVID-19 Pandemic

Feasibility study of reusing surgical masks and evaluation of the effectiveness of different disinfection methods

N95 Filtering Facepiece Respirator Reuse, Extended Use, and Filtration Efficiency

Cloth Face Coverings: Effect of Decontamination Method on Fabric Performance

Life cycle assessment of single-use surgical and embedded filtration layer (EFL) reusable face mask

Disposal and resource utilization of waste masks: a review

Polylactic Acid Face Masks: Are These the Sustainable Solutions in Times of COVID-19 Pandemic?

Current knowledge on the presence, biodegradation, and toxicity of discarded face masks in the environment

Environmental risks of polymer materials from disposable face masks linked to the COVID-19 pandemic