Abstract:Adsorption separation technology using adsorbents is promising as an alternative to the energy-demanding cryogenic distillation of natural gas (CH4/N2) separation. Although a few adsorbents, such as metal–organic frameworks (MOFs), with high performance for CH4/N2 separation, have been reported, it is still challenging to target the desired adsorbents for the actual CH4/N2 separation under humid conditions because the adsorption capacity and selectivity of the adsorbents might be mainly dampened by water vapor. Except for the high CH4 uptake and CH4/N2 selectivity, the adsorption material should simultaneously have excellent stability against moisture and relatively low-water absorption affinity. Here, we tuned the ligands and metal sites of reticular MOFs, Zn-benzene-1,4-dicarboxylic acid–1,4-diazabicyclo[2.2.2]octane (Zn-BDC–DABCO) (DMOF), affording a series of isostructural MOFs (DMOF-N, DMOF-A1, DMOF-A2, and DMOF-A3). Because of the finely engineered pore size and introduced aromatic rings in the functional DMOF, gas sorption results reveal that the materials show improved performance with a benchmark CH4 uptake of 37 cm3/g and a high CH4/N2 adsorption selectivity of 7.2 for DMOF-A2 at 298 K and 1.0 bar. Moisture stability experiments show that DMOF-A2 is a robust MOF with low water vapor capacity even at ∼40% relative humidity (RH) because of the presence of more hydrophobic aromatic rings. Breakthrough experiments verify the excellent CH4/N2 separation performances of DMOF-A2 under high humidity.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01156.Lowest-energy frames for the CH4 molecular adsorption in DMOF at 298 K and infinite dilution (AVI)Lowest-energy frames for the CH4 molecular adsorption in DMOF-A2 at 298 K and infinite dilution (AVI)SEM images; XPS spectra; TGA curves; gas adsorption isotherms at 313 K; gas selectivity coefficient at 313 and 273 K; fitting adsorption isotherms and parameters of the dual-Langmuir–Freundlich for gas adsorption; comparison of gas separation performance of some typical adsorbents; illustration of the most favored gas adsorption site in DMOF and DMOF-A2; PXRD patterns for DMOF-A1, DMOF-A2, and DMOF-A3 treated under different conditions; breakthrough experimental setup schematic; and breakthrough curves of DMOF and DMOF-A2 for the CH4/N2 mixture (80/20, v/v) (PDF)This article has not yet been cited by other publications.

Significant improvement in CH4/N2 selectivity achieved through ammonium exchange in mordenite

Boosting C<sub>2</sub>H<sub>2</sub>/CO<sub>2</sub> separation of metal-organic frameworks <i>via</i> anion exchange and temperature elevation

Vacuum treated amorphous MOF mixed matrix membrane for methane/nitrogen separation

A robust calcium-based microporous metal-organic framework for efficient CH4/N2 separation

Organic molecular gate in mordenite for deep removal of acetylene and carbon dioxide from ethylene under humid condition

Novel zeolite/carbon monolith adsorbents for efficient CH4/N2 separation

Improving separation of CH 4 and N 2 by adsorption on zeolite Y Ion–Exchanged with ammonium Cations: An experimental and Grand–Canonical Monte Carlo (GCMC) simulation investigation

A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

Highly Efficient Separation of Methane from Nitrogen on a Squarate‐based Metal‐organic Framework

Nickel-Based Metal-Organic Frameworks for Coal-Bed Methane Purification with Record CH4/N2 Selectivity.

Methane separation and capture from nitrogen rich gases by selective adsorption in microporous Materials: A review

Improving CH4 uptake and CH4/N2 separation in pillar‐layered MOFs using a regulating strategy of interlayer channels

Tuning the Pore Environment of MOFs toward Efficient CH 4 /N 2 Separation under Humid Conditions

Superior Storage Performance for NO in Modified Natural Mordenite

Enhanced CH4/N2 Separation Efficiency of UiO-66-Br2 through Hybridization with Mesoporous Silica

Research Progress in Microporous Materials for Selective Adsorption and Separation of Methane from Low-Grade Gas

A Robust Al-Based Metal–Organic Framework for Highly Efficient Natural Gas Purification

Maximizing acetylene packing density for highly efficient C2H2/CO2 separation through immobilization of amine sites within a prototype MOF

Boosting C2H2/CO2 Separation of Metal-Organic Frameworks via Anion Exchange and Elevating Temperature

Mono- and di-valent ion exchange of mordenite membranes for dehydration of acetic acid by pervaporation