Abstract:The use of fibre-reinforced plastics (FRPs) in various industrial applications continues to increase thanks to their good strength-to-weight ratio and impact resistance, as well as the high strength that provides engineers with advanced options for the design of modern structures subjected to a variety of out-of-plane impacts. An assessment of the damage morphology under such conditions using non-destructive techniques could provide useful data for material design and optimisation. This study investigated the damage mechanism and energy-absorption characteristics of E-glass laminates and sandwich structures with GFRP face sheets with PVC cores under quasi-static indentation with conical, square, and hemispherical indenters. An acoustic emission (AE) technique, coupled with a k-means++ pattern-recognition algorithm, was employed to identify the dominant microscopic and macroscopic damage mechanisms. Additionally, a post-mortem damage assessment was performed with X-ray micro computed tomography and scanning electron microscopy to validate the identified clusters. It was found that the specific energy absorption after impact with the square and hemispherical indenters of the GFRP sandwich and the plain laminate differed significantly, by 19.29% and 43.33%, respectively, while a minimal difference of 3.5% was recorded for the conical indenter. Additionally, the results obtained with the clustering technique applied to the acoustic emission signals detected the main damaged modes, such as matrix cracking, fibre/matrix debonding, delamination, the debonding of face sheets/core, and core failure. The results therefore could provide a methodology for the optimisation and prediction of damage for the health monitoring of composites.

Acoustic Emission for Experimental Study on the Translaminar Fracture Toughness of a Glass Fiber Plastic

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Transverse Crack Detection in 3D Angle Interlock Glass Fibre Composites Using Acoustic Emission

Experimental study on acoustic emission (AE) characteristics and crack classification during rock fracture in several basic lab tests

Experimental Investigation of Dynamic Fracture Behaviors of Polymethyl Methacrylate

Enhancing Reliability and Safety in Industrial Applications: Assessing the Applicability of Energy b-Value to Composites

Acoustic emission data based modelling of fracture of glassy polymer

Characterization of failure mechanism in glass, carbon and their hybrid composite laminates in epoxy resin by acoustic emission monitoring

Damage Assessment of Glass-Fibre-Reinforced Plastic Structures under Quasi-Static Indentation with Acoustic Emission

Tensile Failure Characterization of Glass/Epoxy Composites using Acoustic Emission RMS Data

Experimental Studies on Fracture of Unidirectional Glass-Fibre-Reinforced Plastics Composites with V-Notch

Fracture characterization of fractured rock bodies based on acoustic and optical characteristics

A Method of Fracture Toughness JIC Measurement Based on Digital Image Correlation and Acoustic Emission Technique

Experimental studies on dynamic fracture behavior of thin plates with parallel single edge cracks

Research on the Brittle Fracture of FRP Rods and Its Acoustic Emission Detection

Damage evolution behavior of cold plasma treated glass fiber/vinyl ester resin composites under bending load by acoustic emission

Experimental Determination of Fracture Toughness of Woven/Chopped Glass Fiber Hybrid Reinforced Thermoplastic Composite Laminates

A Study on Damage of T800 Carbon Fiber/Epoxy Composites under In-Plane Shear Using Acoustic Emission and Digital Image Correlation

Experimental Study on Cracking Process and Fracture Properties of Granite under Mode I Loading by Acoustic Emission and Digital Image Correlation

Experimental Investigation of Compressive Damage Mechanisms on 3-D Braided Composites by Acoustic Emission