Abstract:Amorphous oxide semiconductor (AOS) field-effect transistors (FETs) have been integrated with complementary metal-oxide-semiconductor (CMOS) circuitry in the back end of line (BEOL) CMOS process; they are promising devices creating new and various functionalities. Therefore, it is urgent to understand the physics determining their scalability and establish a physics-based model for a robust device design of AOS BEOL FETs. However, the advantage emphasized to date has been mainly an ultralow leakage current of these devices. A device modeling that comprehensively optimizes the threshold voltage (VT), the short-channel effect (SCE), the subthreshold swing (SS), and the field-effect mobility (µFE) of short-channel AOS FETs has been rarely reported. In this study, the device modeling of two-steps oxygen anneal-based submicron indium-gallium-zinc-oxide (IGZO) BEOL FET enabling short-channel effects suppression is proposed and experimentally demonstrated. Both the process parameters determining the SCE and the device physics related to the SCE are elucidated through our modeling and a technology computer-aided design (TCAD) simulation. In addition, the procedure of extracting the model parameters is concretely supplied. Noticeably, the proposed device model and simulation framework reproduce all of the measured current-voltage (I-V), VT roll-off, and drain-induced barrier lowering (DIBL) characteristics according to the changes in the oxygen (O) partial pressure during the deposition of IGZO film, device structure, and channel length. Moreover, the results of an analysis based on the proposed model and the extracted parameters indicate that the SCE of submicron AOS FETs is effectively suppressed when the locally high oxygen-concentration region is used. Applying the two-step oxygen annealing to the double-gate (DG) FET can form this region, the beneficial effect of which is also proven through experimental results; the immunity to SCE is improved as the O-content controlled according to the partial O pressure during oxygen annealing increases. Furthermore, it is found that the essential factors in the device optimization are the subgap density of states (DOS), the oxygen content-dependent diffusion length of either the oxygen vacancy (VO) or O, and the separation between the top-gate edge and the source-drain contact hole. Our modeling and simulation results make it feasible to comprehensively optimize the device characteristic parameters, such as VT, SCE, SS, and µFE, of the submicron AOS BEOL FETs by independently controlling the lateral profile of the concentrations of VO and O in two-step oxygen anneal process.

An optimized junctionless GAA MOSFET design based on multi-objective computation for high-performance ultra-low power devices

Performance Analysis of Ultra-thin-Body, Double-Gate pMOSFETs at 5 nm Technology Node

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

RF and linearity parameters analysis of 20 nm gate-all-around gate-stacked junction-less accumulation mode MOSFET for low power circuit applications

First-Principles-Based Quantum Transport Simulations of High- Performance and Low-Power MOSFETs Based on Monolayer Ga2O3

GaN-based low-power JLDG-MOSFETs: Effects of doping and gate work function

Subthreshold Behaviors of Nanoscale Silicon and Germanium Junctionless Cylindrical Surrounding-Gate MOSFETs

A Two-Dimensional Analytical Model for Short Channel Junctionless Double-Gate MOSFETs

Design and Analysis of Gate Stack Silicon-on-Insulator Nanosheet FET for Low Power Applications

DC and Analog/RF Performance Evaluation Using Dual Metal Gate Work Function Engineering of Junctionless Cylindrical Gate All Around Si Nanowire MOSFET Using NEGF Approach for Upcoming Sub 5 nm Technology Node

A Fully Analytical Current Model for Gate–Source Overlap Tunneling FETs as the Ternary Devices

Triple-metal gate work function engineering to improve the performance of junctionless cylindrical gate-all-around Si nanowire MOSFETs for the upcoming sub-3-nm technology node

Improvement on the Performance of III-V Channel Based Ultra-Thin Junction-Less-Hybrid CMOS Circuits with Mixed Mode Analysis

A Study of Subthreshold Behavior of Short-Channel Junctionless Cylindrical Surrounding-Gate MOSFETs from an Electrostatic Potential Viewpoint

Device modeling of two-steps oxygen anneal-based submicron InGaZnO back-end-of-line field-effect transistor enabling short-channel effects suppression

Design and analysis of dual gate MOSFET with spacer engineering

Variability Improvement by Interface Passivation and EOT Scaling of InGaAs Nanowire MOSFETs

The Effect of a Dual Oxide - Dual Gate Material and a Sensitivity Analysis on the Performance of a Junctionless Tunnel FET

Quasi-analytical model-based performance analysis of dual material gate stack strained GAA FinFET

A Novel Approach to Model Threshold Voltage and Subthreshold Current of Graded-Doped Junctionless-Gate-All-Around (GD-JL-GAA) MOSFETs

Multiobjective Optimization of Design of 4H-SiC Power MOSFETs for Specific Applications