Abstract:Developing an environmentally friendly adsorbent with high adsorption capacity and economic advantages is crucial for the treatment of cadmium (Cd)-contaminated wastewater. In this study, Bentonite (Bt), which is widely distributed in nature, was used to prepare a new type of chitosan (CS)-grafted polymerized aluminum-pillared bentonite (i.e., Al@Bt): CS@Al@Bt. This new material effectively addresses the issues of chitosan's poor mechanical strength, limited load capacity, and the weak adsorption properties of raw bentonite for Cd. The effects of synthesis conditions on Cd adsorption by modified bentonite were investigated through batch experiments. The adsorption mechanism was revealed by characterization tests such as X-ray diffraction (XRD), N 2 adsorption-desorption experiments, Scanning and Transmission electron microscopy (SEM-TEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The results showed that compared to raw Bt, when the ratio of Al in polymerized aluminum to the cation exchange capacity (CEC) of Bt was increased to 5 (i.e., Al/CEC=5), the specific surface area (SSA) of Bt increased from 78.46 m2/g to 195.99 m2/g. Additionally, the interlayer spacing and total pore volume increased by 1.22 and 1.13 times, respectively. After grafting chitosan onto Al@Bt, CS@Al@Bt reached adsorption equilibrium rapidly within 15 min, achieving a removal rate of up to 99.82% (initial concentration of Cd(II) was 20 mg/L, and the solid-liquid ratio was 1 g/L). Additionally, CS@Al@Bt showed good adsorption performance over a wide pH range. The rich pore structure of CS@Al@Bt and the complexation between amino (-NH 2 ) and hydroxyl (-OH) groups with Cd(II) were the main mechanisms for the removal of Cd(II) from the solution. The application showed that CS@Al@Bt effectively reduced Cd-containing mining wastewater from class V to class II quality, underscoring its significant potential for treating Cd(II)-contaminated wastewater.

Effect of mechanical−chemical modification on adsorption of beryllium by calcite

Preparation of porous calcium carbonate biochar and its beryllium adsorption performance

Beryllium adsorption from beryllium mining wastewater with novel porous lotus leaf biochar modified with PO43−/NH4+ multifunctional groups (MLLB)

Adsorption Behavior of Sr(II) and Some Typical Co‐existent Metals Contained in High Level Liquid Waste Onto a Modified Macroporous Silica‐Based Polymeric DtBuCH18C6 Composite

Biosorption Behavior and Mechanism of Beryllium from Aqueous Solution by Aerobic Granule

Preparation of shell-type biochar and its application for removing beryllium from uranium-beryllium wastewater

Removal of Cd2+ and Pb2+ from an Aqueous Solution Using Modified Coal Gangue: Characterization, Performance, and Mechanisms

Adsorptive removal of beryllium by Fe-modified activated carbon prepared from lotus leaf

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

Toxic Metals and the Risks of Sludge from the Treatment of Wastewater from Beryllium Smelting.

Separable calcium sulphate modified biochar gel beads for efficient cadmium removal from wastewater

Insights into lead removal in water using a novel carbonized material derived from the by‐product of oil refining: action mechanism and performance optimization

Green and effective remediation of heavy metals contaminated water using CaCO3 vaterite synthesized through biomineralization

Sorptive removal of cadmium using the attapulgite modified by the combination of calcination and iron

Efficient removal of cadmium from aqueous solution by chitosan grafted pillared bentonite

Adsorption and Thermal Stabilization of Pb2+ and Cu2+ by Zeolite

Preparation and application of granular bentonite-eggshell composites for heavy metal removal

Intensive adsorption of tetracycline by cobalt oxide quantum dots-loaded mineral carbon

Removal of beryllium (Be2+) from aqueous solution by 5-sulfosalicylic acid-loaded anion-exchange resin

Porous durian shell biochar modified by KMnO4 (Mn-DSB) as a highly selective adsorbent for Be(II)

The adsorption of Cs+ from wastewater using lithium-modified montmorillonite caged in calcium alginate beads