Abstract:The aim of this paper was to explore the application of multi-channel synchronized dynamic strain gauges in monitoring the neutral axis (N.A.) position of prestressed concrete box girders. The N.A. position has recently been proposed as an indicator for monitoring the health of bridge structures. Laboratory experiments were conducted on a prestressed T-beam under different prestress level conditions to investigate the correlation between the prestress magnitude and the N.A. position. In the development of the multi-channel synchronized dynamic strain gauges, edge computing was employed to significantly reduce the amount of data transmitted from the sensor nodes on-site. In edge computing, only the dynamic strain response caused by the maximum vehicle load in each minute is transmitted. This approach greatly enhances the monitoring efficiency and enables the realization of on-site non-computer-based monitoring systems. The laboratory test results of the prestressed T-beam showed that the N.A. position tends to move slightly downward as the prestress force increases. In other words, when the prestress force decreases due to loss, the N.A. position exhibits a slight upward movement. This study selected a newly constructed prestressed box girder as the subject for on-site measurement of the N.A. position using multi-channel synchronized dynamic strain gauges shortly after the prestress was applied. The on-site monitoring data indeed revealed a gradual upward movement of the N.A. position. This phenomenon confirmed that soon after the completion of prestressed concrete bridges, there is a gradual loss of prestress due to the significant shrinkage and creep effects of the early-age concrete. The on-site monitoring result aligned with the findings from the laboratory experiments, where the N.A. position was observed to move upward as the prestress decreased.

Long‐term performance monitoring and assessment of concrete beam bridges using neutral axis indicator

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Application of Multi-Channel Synchronized Dynamic Strain Gauges in Monitoring the Neutral Axis Position and Prestress Loss of Box Girder Bridges

Kalman Filter Based Estimation of Neutral Axis Position of Bridge Deck under Traffic Loading

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Long-term structural health monitoring for bridge based on back propagation neural network and long and short-term memory

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

Structural Health Monitoring Design and Performance Evaluation of a Middle-Span Bridge

Healthy monitoring and altering system on-line of bridge structures Ⅰ——Design for monitoring assessment,altering system and modules

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Performance Evaluation of a Long-Span Cable-Stayed Bridge Using Non-Destructive Field Loading Tests

Innovative Design of a Health Monitoring System and Its Implementation in a Complicated Long-Span Arch Bridge

Bridge Health Monitoring Using Strain Data and High-Fidelity Finite Element Analysis

Health Monitoring Of Rehabilitated Concrete Bridges Using Distributed Optical Fiber Sensing

Long Term Health Monitoring of Post-Tensioning Box Girder Bridges

Long-Term Structural Health Monitoring System for a High-Speed Railway Bridge Structure

Methodology of Long-Term Real-Time Condition Assessment for Existing Cable-Stayed Bridges

Reliability-Based Safety Assessment of Bridge Members on Monitored Live Load Effects