Abstract:Silicon (Si) is a promising anode material for next-generation lithium-ion batteries (LIBs) with its high theoretical specific capacity (4200 mAh/g). However, Si anode has a huge volume change rate (> 300%) and high cost compared to graphite, which limits the commercial application of Si anode. Carbon coating can effectively tackle the volume change and poor conductivity during cycling of Si anode. In this work, aluminum–silicon alloy was firstly etched by hydrochloric acid. Followed by a mixture with pyrolysis of phenolic resin, the carbon layer outside the silicon particles was deposited during heat treatment process. The carbon-coated porous silicon-carbon (Si/C) anode material demonstrates excellent electrochemical performance and porous structure, which relieves mechanical stress and inhibits volume expansion. The results show that Si/C present well electrochemical performance at a sintering temperature of 800 °C. Specially, the Si/C anode delivers a high specific capacity of 1394.4 mAh/g at the current density of 0.5 A/g with 46.1% retention. Nitrogen-doped silicon carbon composite material (Si/NC) was synthesized to further improve the performance of Si/C anodes. The characterizations confirm good crystallinity, uniform carbon coating on silicon surfaces, and even distribution of Si, C, and N elements. Simultaneously, a highly stable reversible capacity of 1218.3 mAh/g with 42.7% retention over 300 cycles at a current density of 0.5 A/g was obtained. This research can provide an alternative approach for high-energy and low-cost silicon-based anodes for LIBs.

Carbon-coated SiO for LIBs with superior capacity and cycle stability

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

SiO anode with long-term cycling ability enhanced by a SiC transition layer based on polymethysilane in LIBs

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

Disproportionated SiOx/C composite anode materials for lithium-ion batteries

Excellent Cyclic and Rate Performances of SiO/C/Graphite Composites As Li-Ion Battery Anode.

Green Design of Si/SiO<sub>2</sub>/C Composites as High-Performance Anodes for Lithium-Ion Batteries

Carbon and Li3BO3 co‐modified SiO x as anode for high‐performance lithium‐ion batteries

Long-cycle and High-rate Si/SiOx/Nitrogen-doped Carbon Composite as an Anode Material for Lithium-ion Batteries

Highly Graphitized Carbon Coating on SiO with a π–π Stacking Precursor Polymer for High Performance Lithium-Ion Batteries

High-performance Si-Containing anode materials in lithium-ion batteries: A superstructure of Si@Co–NC composite works effectively

Toward Ultra-Long Cycling Stability and High Lithium Storage Performances: Silica Anodes with Catalytic Effects of Low-Cost Metals Particles

3D Carbon Coating Enabled High‐capacity and Stable Micro‐sized Silicon Suboxide‐graphite Blended Anodes for Practical Lithium‐ion Batteries

Carbon Uniformly Distributed Siox/C Composite with Excellent Structure Stability for High Performance Lithium-Ion Batteries

Preparation and properties of porous silicon anode coated with nitrogen-doped carbon for lithium-ion battery

Carbon-Coated Si Nanosheets as Anode Materials for High-Performance Lithium-Ion Batteries

Silicon particles confined in carbon nanotubes anode materials by green utilization of carbon dioxide in lithium-ion battery

Multi-functional double carbon shells coated boron-doped porous Si as anode materials for high-performance lithium-ion batteries

Carbon-coated Silicon/graphite Oxide Composites As Anode Materials for Highly Stable Lithium-Ion Batteries

Carbon-coated silicon/graphite oxide composites as anode for highly stable lithium-ion batteries

Electrochemical Performance Enhancement of Porous Si Lithium-Ion Battery Anode by Integrating with Optimized Carbonaceous Materials