Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Novel PEI@CSH adsorbents derived from coal fly ash enabling efficient and in-situ CO2 capture: The anti-urea mechanism of CSH support

Polyethylenimine-Grafted Hkust-Type Mof/Poiyhipe Porous Composites (Pei@Pgd-H) As Highly Efficient Co(2 )Adsorbents

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Facile and efficient amine@AD-SiO 2 adsorbents from coal fly ash: Comparison of various amines for CO 2 adsorption capacity and cyclic stability

Atom-level interaction design between amines and support for achieving efficient and stable CO2 capture

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

A novel approach to prepare efficient CO2 sorbents derived from alumina-extracted residue of coal ash

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture

A general Energy-Efficient strategy for optimizing CO 2 Capture: Designing and harnessing the rapid adsorption kinetics of Amine-Impregnated adsorbents

Application of amine-loaded activated carbon fiber in CO2 capture and separation

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

A surfactant modified solid amine adsorbent to enhance CO 2 adsorption performance

Tuning the Acidity and Textural Properties for Enhanced Economical CO2 Capture in Polyethyleneimine (PEI) Supported Adsorbents

Rational Design of the Polymeric Amines in Solid Adsorbents for Postcombustion Carbon Dioxide Capture

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Insights into the Critical Role of Abundant-Porosity Supports in Polyethylenimine Functionalization As Efficient and Stable CO2 Adsorbents.

Amine-impregnated porous carbon–silica sheets derived from vermiculite with superior adsorption capability and cyclic stability for CO 2 capture

Biogas Upgrading via Cyclic CO 2 Adsorption: Application of Highly Regenerable PEI@nano-Al 2 O 3 Adsorbents with Anti-Urea Properties

Efficient and stable CO2 capture using a scalable and spontaneous cross-linking amine-functionalized nano-Al2O3 adsorbent

Development of a Pentaethylenehexamine-Modified Solid Support Adsorbent for CO2 Capture from Model Flue Gas

Polyethyleneimine-Nano Silica Composites: A Low-Cost And Promising Adsorbent For Co2 Capture