Abstract:Additive technologies make it possible to manufacture products using a layer-by-layer synthesis, thus obtaining products of complex shapes. When solving a complex problem of numerical modeling of additive technological processes, it is necessary to describe various thermomechanical phenomena with high accuracy. The most effective in this regard is the use of a combination of capabilities of specialized software systems and the development of unique algorithms for them, taking into account the maximum possible number of process parameters. The paper considers the calculation algorithm of non-stationary temperature fields and stress-strain state of the structure in the process of its creation by 3D welding of wire materials developed and implemented using the ANSYS Mechanical package in the APDL language. In particular, this model takes into account the non-stationary radiant transfer of thermal energy of the welding arc to the surface of the product. The review highlights three of the most commonly used methods for modeling material deposition, i.e. the so-called element birth, sleeping element (quiet element) and hybrid activation (hybrid activation). It is shown that in order to ensure greater efficiency of calculations, it is necessary to use the principle in which successive steps of melting and even layers are grouped together for a subsequent simultaneous activationn. In the presented model, the task is divided into the boundary problem of non-stationary thermal conductivity and the boundary problem of thermomechanics of the stress-strain state, which are uncoupled. To solve them we applied the technology of killing and the subsequent birthing of a part of the material, implemented with the ANSYS package. Verification of the developed numerical algorithm aimed at solving the three-dimensional problem of the arc surfacing of wire materials was carried out by a comparison with the results of the experimental tests on D16 aluminum alloy samples. To describe the elastoplastic behavior of the alloy, the BISO model of bilinear isotropic plasticity with a temperature dependence of yield strength was used. A good consistency of the calculated data with the experiment was shown. The effect was studied on the level of the residual distortion of such process parameters as exposure time to the next layer, the motion path of the slicer, ambient temperatures. It is shown that the latter parameter is the most effective way to reduce residual shape deviations, but requires high thermal stability of equipment and accuracy of arc energy control.

Automated contacting technology for needle winding applications with distributed windings

Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

Characterization of Rectangular Copper Wire Forming Properties and Derivation of Control Concepts for the Kinematic Bending of Hairpin Coils

Manufacturing Techniques for Electric Motor Coils With Round Copper Wires

Quality characteristics and analysis of input parameters on laser beam welding of hairpin windings in electric drives

Development of Estimation Procedure of Contact Heat Transfer Coefficient at the Part–Tool Interface in Hot Stamping Process

Innovative Assistance System for Setting up a Mechatronic Straightening Machine

Experimental and numerical investigations of wire bending by linear winding of rectangular tooth coils

Novel Straightening-Machine Design with Integrated Force Measurement for Straightening of High-Strength Flat Wire

Electromagnetic and Calorimetric Validation of a Direct Oil Cooled Tooth Coil Winding PM Machine for Traction Application

Analysis of Circulating Current in Hairpin Windings Due to Manufacturing Deviation

Residual Stress Engineering for Wire Drawing of Austenitic Stainless Steel X5CrNi18-10 by Variation in Die Geometries—Effect of Drawing Speed and Process Temperature

A Multi-Objective Design Optimization for a Permanent Magnet Synchronous Machine with Hairpin Winding Intended for Transport Applications

Influence of an Additional Indexing Rotary Axis on Wire EDM Performance for the Automated Manufacture of Fir Tree Slots

Influence of an Additional Indexing Rotary Axis on Wire Electrical Discharge Machining Performance for the Automated Manufacture of Fir Tree Slots

Control design of a reciprocating high-speed wire feed system for 7-axis robotic electric discharge machining

Design and simulation of cross wedge rolling process for hollow motor shaft

Filling Path Planning and Polygon Operations for Wire Arc Additive Manufacturing Process

Die Structure and Its Trial Manufacture for Thread and Spline Synchronous Rolling Process

STUDYING OF THE INFLUENCE OF 3D WIRE DEPOSITION PROCESS PARAMETERS ON THE FORMATION OF RESIDUAL DEFORMATIONS