Abstract:All-solid-state electrolytes provide a guarantee for the safe running of Li metal batteries (LMBs) with high energy density. Nevertheless, the low ionic conductivity and huge interfacial impedance between lithium anodes and electrolytes are the critical issues baffling their rapid development and practical application, particularly limiting their operation at room temperature. The introduction of ionic liquids (IL) is expected to solve the above problems. However, the effect of the IL-involved solid-state electrolytes on lithium dendrites suppression has not been clearly revealed and still necessitates in-depth evaluation. In this article, we report an in situ LiF-rich solidelectrolyte interphase (SEI) on the lithium anode triggered by reductive decomposition of IL and Li1.5Al0.5Ge1.5(PO4)3-involved electrolyte. For the first time, the mechanism of SEI formed on Li metal based on IL-based solid-state electrolyte was unveiled. A combination of experimental and computational investigation manifests that the presence of Li1.5Al0.5Ge1.5(PO4)3 promotes the release of fluorine anion from IL, and a SEI layer with high content of LiF can be generated in situ through the reductive decomposition of wandering fluorine anion. Thanks to the high mechanical modulus from Li1.5Al0.5Ge1.5(PO4)3, the symmetric Li|Li batteries equipped with synthesized solid-state composite electrolyte (SSCE) exhibit extremely stable Li plating/stripping behavior for more than 2700 h with a small polarization voltage of 50 mV at 0.1 mA cm-2. Moreover, the assembled solidstate Li|LiFePO4 batteries based on SSCE could operate steadily for 196 cycles at ambient temperature, with 90.7% capacity retention. These results provide a promising insight into the design of SSCE and realization of room temperature solid-state LMBs with high performance.

Low Melting Temperature Gallium-Indium Liquid Metal Anode for Solid-State Li-Ion Batteries

A High-Performance, Solution-Processable Polymer/ceramic/ionic Liquid Electrolyte for Room Temperature Solid-State Li Metal Batteries

Germanium Thin Film Protected Lithium Aluminum Germanium Phosphate for Solid‐State Li Batteries

Revealing the Role of Liquid Metals at the Anode-Electrolyte Interface for All Solid-State Lithium-Ion Batteries

Alkali‐ion Batteries by Carbon Encapsulation of Liquid Metal Anode

A High‐Performance Room‐Temperature Li||Ga–Sn Liquid Metal Battery for Grid Energy Storage

Flame Retardant and Stable Li1.5Al0.5Ge1.5(PO4)3-Supported Ionic Liquid Gel Polymer Electrolytes for High Safety Rechargeable Solid-State Lithium Metal Batteries

Room‐Temperature All‐Liquid‐Metal Batteries Based on Fusible Alloys with Regulated Interfacial Chemistry and Wetting

Quasi-Solid-State Ion-Conducting Arrays Composite Electrolytes with Fast Ion Transport Vertical-Aligned Interfaces for All-Weather Practical Lithium-Metal Batteries

Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid

A Solid-State Lithium Metal Battery with Extended Cycling and Rate Performance Using a Low-Melting Alloy Interface

Gallium-Indium-Tin Eutectic as a Self-Healing Room-Temperature Liquid Metal Anode for High-Capacity Lithium-Ion Batteries

Integrated lithium metal anode protected by composite solid electrolyte film enables stable quasi-solid-state lithium metal batteries

Gallium‐based liquid metals for lithium‐ion batteries

An Electron/Ion Dual‐Conductive Alloy Framework for High‐Rate and High‐Capacity Solid‐State Lithium‐Metal Batteries

LiI-KI and LAGP Electrolytes with a Bismuth-Tin Positive Electrode for the Development of a Liquid Lithium Battery

Lamellar Ionic Liquid Composite Electrolyte for Wide‐Temperature Solid‐State Lithium‐Metal Battery (Adv. Energy Mater. 23/2023)

Developing High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress

All-Solid-State Lithium Metal Batteries Enabled by Solid Electrolytes with Low-Temperature Processability

Stabilize Garnet/Electrode Interface via Low-melting Polymer Layer in Solid-state Lithium Metal Battery