Abstract:The pipe-embedded double-skin façade (PDSF) is a superior approach to decrease building cooling and heating load by using natural energy. With pipes embedded in the shading, the overheating problem in the conventional double-skin façade (DSF) can be eliminated. Unlike the traditional DSF or glass windows, the thermal performance of PDSF depends on the ambient environment and water temperature in the embedded pipes. Although the complicated heat transfer process of PDSF can be numerically solved, it is difficult for engineers to obtain the whole picture of the PDSF at first glance. To easily understand the thermal property of the PDSF, the overall heat transfer coefficient (U value), solar heat gain coefficient (SHGC) and equivalent ambient temperature of the PDSF are derived based on the thermal network. The heat transfer characteristic of the PDSF at different cooling water temperatures is compared with that of the conventional DSF. The results show that the three proposed indices can clearly reflect the thermal property of the PDSF: U value and SHGC reflects the influence of insulation and the transparency respectively, and the equivalent temperature reflects the integrated influence of water temperature and outdoor temperature. The typical PDSF has a higher U value than the DSF in the same structure. However, the SHGC of the PDSF is only 60% of that of the DSF. Although the equivalent ambient temperature depends on the outdoor temperature and water temperature, the weighting of the water temperature is 0.8, which indicates that the equivalent ambient temperature for the PDSF can reach a better level with the appropriate water temperature. Moreover, relatively warm water is suggested on sunny days to reduce the solar heat gain, since the solar heat gain is dominant in the total heat gain. Correspondingly, cool water is recommended for cloudy days to decrease the conductive heat gain.

Thermal Characteristics Simulation of an Energy-Conserving Facade: Water Flow Window

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Temporal variation of wall flow and its influences on energy balance of the building wall

Thermal performance testing of triple-glazing water flow window in cooing operation

CFD analysis of environmental impacts on a thermochromic smart window

Thermal Performance Of Double Skin Facade Windows

Simulation and Analysis of Thermal Performance of Internal Recycle Double Skin Facades

Natural Airflow in a Reversible Double-Glass Window with Reflective Film for Building Applications

A Simulation-Aided Approach in Examining the Viability of Passive Daylighting Techniques on Inclined Windows

Research on a New Type of Solar Photovoltaic Solar Thermal Integrated Louver Curtain Wall

The Convective Heat Transfer Performance and Structural Optimization of the Cavity in Energy-Saving Thermal Insulation Windows under Cold Air Penetration Condition

Thermal Performance of a Novel Water Blind-Trombe Wall System: A Comparative Experimental Investigation

Experimental and numerical performance investigation of a water-flow window with vacuum-glazing insulation

Experimental investigation of indoor lighting/thermal environment of liquid-filled energy-saving windows

3D Numerical Simulation of the Transient Thermal Behavior of a Simplified Building Envelope Under External Flow

Three-Dimensional Simulation on the Thermal Performance of A Novel Trombe Wall with Venetian Blind Structure

A Method to Describe the Thermal Property of Pipe-Embedded Double-Skin Façade: Equivalent Glass Window

Numerical Analysis of the Influencing Factors on the Performance of a Pipe-Embedded Window Operated in Summer

Investigation on the Overall Performance of Hydrogel-Based Thermochromic Windows with Various Structures

The design of a comfortable thermal environment by simulation: A case study