Multi-Electric Aero Engine Control and Hardware-in-the-Loop Verification with Starter Generator Coordination

Jun Fang,Tianhong Zhang,Zhaohui Cen,Elias Tsoutsanis
DOI: https://doi.org/10.3390/aerospace11040271
IF: 2.66
2024-03-31
Aerospace
Abstract:The starter generator, characterized by controllable starting torque and disturbance in generator load torque, poses challenges for the multi-electric aero engine control. The key to addressing this issue lies in multi-electric aero engine control with the collaboration of a starter generator. Firstly, a multi-electric aero engine model is established, comprising a full-state turbofan engine model to enhance low-speed simulation capability and an external characteristic model of a starter generator to improve real-time simulation capability. Subsequently, the control methods for a multi-electric aero engine with starter generator coordination are proposed in three processes, including the starting process, acceleration/deceleration process, and steady-state process. During the starting process, the acceleration is controlled by coordinating the torque of the starter generator and the fuel of the aero engine. During the acceleration/deceleration process, the fuel limit value is adjusted based on the electrical load of the starter generator. During the steady-state process, the fuel is compensated based on the q-axis current of the starting generator in response to load torque disturbance. Finally, hardware-in-the-loop simulation experiments are conducted for the control of a multi-electric aero engine. The results show that the coordination reduces the oscillation of the acceleration during the startup of a multi-electric aero engine, enhancing its ability to resist disturbances from electrical load fluctuations during power generation.
engineering, aerospace
What problem does this paper attempt to address?
The paper primarily focuses on addressing the control challenges brought about by the controllable starting torque and the electrical load torque disturbances of the Starter Generator (SG) during the start-up, acceleration/deceleration, and steady-state processes of Multi-Electric Aero Engines. Specifically, the core objectives of the paper include: 1. **Establishing a Multi-Electric Aero Engine Model**: Researchers have constructed a Multi-Electric Aero Engine model that includes a full-state turbofan engine model and an external characteristic model of the Starter Generator, to enhance low-speed simulation capabilities and real-time simulation capabilities. 2. **Proposing a Collaborative Control Method**: For the coordination between the Multi-Electric Aero Engine and the Starter Generator, three control strategies during different processes are proposed, including the start-up process, acceleration/deceleration process, and steady-state process. During start-up, acceleration is controlled by coordinating the torque of the Starter Generator and the fuel of the aero engine; during acceleration/deceleration, the fuel limit is adjusted based on the electrical load of the Starter Generator; in the steady-state process, fuel is compensated based on the q-axis current of the Starter Generator to cope with load torque disturbances. 3. **Hardware-in-the-Loop Verification**: Hardware-in-the-loop simulation experiments were conducted to verify the effectiveness of the aforementioned control methods. The results show that this collaborative control reduces the acceleration oscillations during the start-up of the Multi-Electric Aero Engine and enhances its ability to resist disturbances from electrical load fluctuations during power generation. The paper also emphasizes the increasingly important role of the Starter Generator in the control design of Multi-Electric Aero Engines, especially the importance of considering its coordination during the start-up and power generation processes. It criticizes the practice in existing control research of treating the aero engine and the Starter Generator as independent entities, pointing out that with the increase in the power of the Starter Generator, this coupling effect cannot be ignored. Finally, the paper proposes an innovative control method aimed at improving the start-up performance of Multi-Electric Aero Engines and reducing the interference of generator load torque on acceleration, deceleration, and steady-state processes.