Abstract:An on‐skin paintable water‐resistant biohydrogel is introduced. By dynamically modulating the hydrogen bond linkage, the ink of the biohydrogel is capable of converting to a film within 2 min and forming a seamless interface. The obtained biohydrogel performs water‐resistant, skin‐like, and ethanol‐triggered removal properties. Besides, multi‐channel and high‐fidelity electrocardiogram detection is achieved by applying the biohydrogel. To achieve accurate monitoring of bioelectrical signals, it is essential to use customizable bioelectrodes that can self‐adapt to the skin's surface topography. Ion‐conducting hydrogel has received significant attention in this field due to its softness, adhesion, and skin‐like mechanical properties. However, these bioelectrodes currently suffer from degradation of adhesion, electrical conductivity, and skin‐compliance when exposed to aqueous environments. This significantly limits the application of bioelectrodes. Herein, a customizable biohydrogel that can be applied on skin or fabric by solvent volatilization for liquid ink‐gel film conversion is reported. The biohydrogel's distinct characteristic of transitioning between a liquid and hydrogel phase establishes superb conformal contact and dynamic compliance with the epidermis. This effectively eliminates motion artifacts and results in lower contact impedance and noise in both static and dynamic states when compared to existing bioelectrodes. The biohydrogel is applied to the cotton fabric to create electrocardiogram (ECG) monitoring garments. These garments enable the acquisition of ECG signals with high accuracy in aqueous environment for over 72 h. Besides, the biohydrogel‐based garments outperform the commercial gel electrodes by 83.5% in signal‐to‐noise ratio. Additionally, the cotton/biohydrogel electrode facilitates multi‐channel, high‐fidelity recording of ECG signals, enabling high‐performance capture and classification of ECG waveforms across multiple channels.

Stable and reliable bio-interfacing electrodes based on conductive hydrogels

Laser-Induced Highly Stable Conductive Hydrogels for Robust Bioelectronics

Highly Conducting and Stretchable Double‐Network Hydrogel for Soft Bioelectronics

Engineering Electrodes with Robust Conducting Hydrogel Coating for Neural Recording and Modulation

Conductive Bio‐based Hydrogel for Wearable Electrodes via Direct Ink Writing on Skin

Multifunctional Conductive Hydrogel Interface for Bioelectronic Recording and Stimulation

Electroconductive, Adhesive, Non‐swelling, and Viscoelastic Hydrogels for Bioelectronics

Triple‐network‐based conductive polymer hydrogel for soft and elastic bioelectronic interfaces

Low-impedance tissue-device interface using homogeneously conductive hydrogels chemically bonded to stretchable bioelectronics

3D printable high-performance conducting polymer hydrogel for all-hydrogel bioelectronic interfaces

Conductive and antibacterial dual-network hydrogel for soft bioelectronics

Highly adhesive and self-healing γ-PGA/PEDOT:PSS conductive hydrogels enabled by multiple hydrogen bonding for wearable electronics

Highly conductive tissue-like hydrogel interface through template-directed assembly

Bioinspired 3D printed elastomer-hydrogel hybrid with robust interfacial bonding for flexible ionotronics

Engineering Electrodes with Robust Conducting Hydrogel Coating for Neural Recording and Modulation (Adv. Mater. 3/2023)

3D Printable High Performance Conducting Polymer Hydrogel for All-Hydrogel Bioelectronics

Conductive Cellulose Bio‐Nanosheets Assembled Biostable Hydrogel for Reliable Bioelectronics

Tissue Adhesive, Conductive, and Injectable Cellulose Hydrogel Ink for On-Skin Direct Writing of Electronics

N-type semiconducting hydrogel

Mechanically Interlocked Hydrogel–Elastomer Hybrids for On‐Skin Electronics

On‐Skin Paintable Water‐Resistant Biohydrogel for Wearable Bioelectronics