Abstract:The structural manipulation of the electroactive β phase of poly(vinylidene fluoride) (PVDF) is particularly important in sensor and actuator applications. Herein, an efficient way to enhance dielectric and ferroelectric properties of PVDF films by annealing preoriented PVDF films through thermal treatment combined with the pressure field is proposed. During annealing processing, an appropriate pressure is attributed to the efficient dipole rotation and results in complete phase transformation of the nonpolar α phase (TGTG′) into the polar β phase (TTTT). Moreover, the appropriate pressure and temperature fields synergistically promote a more perfect alignment of the main chain in β-crystallites along the stretching direction. Thus, the pure β phase with ultrahigh orientation (Herman's orientation factor >0.97) is successfully obtained. Moreover, the enhanced mobility of molecular chains with the increase of temperature contributes to the perfection of β-crystallites with high crystallinity. The relaxation of oriented chains in the amorphous region at high temperature during the annealing process is obviously inhibited by high pressure, leading to increased density of dipoles capable of efficient rotation under an electric field. The unique structure obtained imparts a distinctly enhanced dielectric and ferroelectric properties to the PVDF films. The highest dielectric constant at room temperature is observed in preoriented films annealed at 160 °C due to the optimal chain orientation. Moreover, the film with more perfect and tightly packed β-crystallites annealed at 180 °C shows clearly ferroelectric switching and the maximum remnant polarization (5.8 μC/cm2). The outcomes of this work indicate that a rational combination of pressure and temperature fields could effectively achieve optimal dielectric and ferroelectric properties of PVDF oriented films.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.macromol.1c02436.FTIR spectra of PVDF films modulated by thermal annealing under different pressures (100–500 MPa); 2D-WAXD patterns, 1D-WAXD profiles, azimuthal profiles, and Herman's orientation factor (fH) of the (110, 200)β diffraction peak of PVDF films modulated by thermal annealing under different pressures (100–500 MPa); DSC melting curves of PVDF films modulated by thermal annealing under different pressures (100–500 MPa); calculation methods of the thicknesses of lamellae (dc), amorphous regions (da), and the long period (dac) according to the correlation function; 2D-SAXS patterns, 1D-SAXS profiles, resultant correlation function curves, and dc, da, and dac of PVDF films modulated by thermal annealing under different pressures (100–500 MPa) (PDF)This article has not yet been cited by other publications.

Rapid microwave annealing of ferroelectric copolymer films for multifunctional perception

In-situ Electrostatic Field Regulating the Recrystallization Behavior of P(VDF-TrFE) Films with High Β-Phase Content and Enhanced Piezoelectric Properties Towards Flexible Wireless Biosensing Device Applications

High Performance Piezoelectric Polymer Film with Aligned Electroactive Phase Nanofibrils Achieved by Melt Stretching of Slightly Crosslinked Poly(vinylidene Fluoride) for Sensor Applications

Piezoelectric Enhancement in P(VDF-TrFE) Copolymer Films via Controlled and Template-Induced Epitaxy

Porous, Self-Polarized Ferroelectric Polymer Films Exhibiting Behavior Reminiscent of Morphotropic Phase Boundary Induced by Size-Dependent Interface Effect for Self-Powered Sensing

Temperature dependence of piezo- and ferroelectricity in ultrathin P(VDF-TrFE) films

Optically Controlled Coercive Field of MAPbl3/P(VDF-TrFE) Ferroelectric Composite Films

Solvent Vapor Annealing of Ferroelectric P(VDF-TrFE) Thin Films

Ultrathin Epidermal P(VDF-TrFE) Piezoelectric Film for Wearable Electronics

Composites, Fabrication and Application of Polyvinylidene Fluoride for Flexible Electromechanical Devices: A Review

Novel Sandwich-Structured Flexible Composite Films with Enhanced Piezoelectric Performance.

Programming Piezoelectric Phase of Poly(Vinylidene Fluoride) via Hybrid Metal Halide Perovskite for Enhanced Electromechanical Performance

Fluoropolymer ferroelectrics: Multifunctional platform for polar-structured energy conversion

Flexible Polyvinylidene Fluoride(pvdf)/mxene(ti3c2tx)/polyimide(pi) Wearable Electronic for Body Monitoring, Thermotherapy and Electromagnetic Interference Shielding

Exploiting flow manipulation to engineer the electroactive phase for improved piezo response in size tunable PVDF microspheres via microfluidic technology

Enhanced Dielectric and Ferroelectric Properties of Poly(vinylidene fluoride) through Annealing Oriented Crystallites under High Pressure

Mechanisms for Enhancing Polarization Orientation and Piezoelectric Parameters of PVDF Nanofibers

Interfacial Engineering of PVDF‐TrFE toward Higher Piezoelectric, Ferroelectric, and Dielectric Performance for Sensing and Energy Harvesting Applications

Enhanced Pyroelectricity Over Extended Thermal Range in Flexible Polymer Thin Films

Ultrasensitive mechanical/thermal response of a P(VDF-TrFE) sensor with a tailored network interconnection interface

Comparative assessment of piezoelectric and pyroelectric-hybrid energy conversion functions for flexible PVDF-based polymers