Abstract:The performance of identical hydrophilic-hydrophobic coupled micro-pin-finned surfaces was evaluated using FC-72 as the working fluid in pool boiling experiments. Three hydrophilic and hydrophobic coupled rectangular copper column surfaces (HH4, HH9, and HH16) were constructed to analyze their boiling heat transfer properties. By integrating the micro-pin-finned surface (PF) and the smooth surface (SS), the impact of various subcoolings (0 K, 15 K, and 25 K) on the critical heat flux (CHF) was explored. Surface HH16 showed the greatest sensitivity to subcooling effects on CHF, followed by HH9 and HH4, respectively. For HH9, the CHF at Delta Tsub = 0 K, 15 K, and 25 K, reached 69.6 W center dot cm(-2), 84.2 W center dot cm(-2), and 93.7 W center dot cm(-2), respectively. In comparison to other surfaces (PF, HH4, HH16), the CHF of HH9 climbs by 19.32 %, 8.75 %, and 10.8 % at saturated boiling, respectively. A high-quality camera captured bubble dynamics during the experiments. The results reveal that the hydrophilic and hydrophobic coupled micro-pin-finned copper surface has a greater critical heat flux (CHF) than the standard rectangular micro-pin-finned surface, although heat transfer performance (HTC) drops marginally (both saturated and subcooled boiling). Visual monitoring demonstrates that these coupled surfaces effectively prevent bubble coalescence during subcooled boiling. Additionally, this novel surface design may serve as an effective strategy to reduce drying and delay the onset of boiling crises. The CHF improvement of the HH9 on SS surface was 313.06 %, significantly higher than the 246.17 % of PF on SS, marking a performance increase of 66.89 %. The influence mechanism of the Lattice width coefficient and the Vapor column spacing coefficient on CHF were analyzed. Fluid replenishment and bubble formation behavior were applied to clarify the strengthened heat transfer and CHF triggering mechanism on the surface of the hydrophilic and hydrophobic coupled rectangular micro-pin-finned copper column surface.

Thermohydraulic performance analysis and optimization of stripe patterned hybrid-wetting surface condensation by 3D steady simulation

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Multiphase SPH Modeling of Water Boiling on Hydrophilic and Hydrophobic Surfaces

Thermohydraulic analysis of hybrid smooth and spirally corrugated tubes

Experiments and modeling of boiling heat transfer on hybrid-wettability surfaces

Numerical study flow and heat transfer characteristics of superhydrophobic single tube bundle surface and wake flow

Numerical prediction of dropwise condensation performances on hybrid hydrophobic-hydrophilic surfaces

Pool Boiling Heat Transfer Enhancement on the Hybrid Surfaces Coupling Capillary Wick and Minichannels

Critical Heat Flux and Bubble Dynamics on Mixed Wetting Surfaces

Numerical Analysis of Hydrophobic Surface Effects on Cavitation Inception and Evolution in High-Speed Centrifugal Pumps for Thermal Energy Storage and Transfer Systems

Effects of Surface Wettability on Bubble Departure and Critical Heat Flux: A Parametric Study Based on 3-D Dynamic Force Analysis Model

Thermo-Hydraulic Performance Evaluation, Field Synergy, and Entransy Dissipation Analysis for Hexagon-Like and Circular-Like Pin Finned Tube Bundles

Enhanced Moisture Condensation on Hierarchical Structured Superhydrophobic–Hydrophilic Patterned Surfaces

Analysis and Optimization of Thermo-Hydraulic Characteristics of Phase Change Slurry in Wavy MCHS with Porous Fins Based on RSM and Desirability Methods

Experimental Study of Pool Boiling Heat Transfer on Novel Bistructured Surfaces Based on Micro-Pin-finned Structure

Numerical investigation of surface wettability effect on two-phase closed thermosyphon

Boiling Heat Transfer And Bubble Distribution On Inhomogeneous Wetting Surface Patterned With Sierpinski Carpet

Study on the Performance of a Surface with Coupled Wettability Difference and Convex-Stripe Array for Improved Air Layer Stability

Assessing the enhancements in thermal performance of two-phase thermosyphon loops through riser wettability optimization

Conjugate Heat Transfer Effects of Tri-Periodic Minimal Surfaces on Cooling Performance in Turbine Internal Cooling Channels

A numerical study on multi-nozzle spray cooling of downward-facing heater surface