Abstract:Methods for Pu determination in water samples has been longtime studied but they generally involved tedious manual operations. In this context, we proposed a novel strategy for accurate determination of ultra-trace Pu in water samples by the combination of fully automated separation with direct ICP-MS/MS measurement. A recently commercialized extraction resin TK200 was used for single-column separation due to its distinctive nature. Acidified waters up to 1 L were directly loaded to the resin at high flow rate (15 mL min-1) with omitting the frequently used co-precipitation process. Small volumes of dilute HNO3 were used for column washing, and Pu was efficiently eluted within only 2 mL 0.5 mol L-1 HCl-0.1 mol L-1 HF with a stable recovery (65%). This separation procedure was fully automated under the control of user program, meanwhile the final eluent was compatible for direct ICP-MS/MS measurement without extra sample treatment. In that way, both the labor intensity and reagent consumption were minimized compared with existing methods. With the high decontamination (104 to 105) of U in the chemical separation and the further elimination of uranium hydrides under oxygen reaction model during ICP-MS/MS measurement, the overall interference yields of UH+/U+ and UH2+/U+ were down to 10-15. The limits of detection (LODs) of this method reached 0.32 μBq L-1 for 239Pu and 2.00 μBq L-1 for 240Pu, which were much lower than those stipulated in the general guidelines for drinking water standards, suggesting this method was promising in routine or emergency radiation monitoring. Furthermore, the established method was successfully applied in a pilot study to determine global fallout derived Pu in surface glacier samples with extremely low concentrations of 239+240Pu, which suggested the method would also be feasible in glacial chronology studies in the future.

Detection capability of environmental alpha spectrometry: I. Precision and accuracy

Alpha spectrometry and liquid scintillation counting for the measurement of 238Pu, 239Pu, 240Pu, 241Pu, 242Pu and age

PRINCIPLES OF GROSS ALPHA AND BETA RADIOACTIVITY DETECTION IN WATER

Determination of Plutonium Isotopes (Pu-238, Pu-239, Pu-240, Pu-241) in Environmental Samples Using Radiochemical Separation Combined with Radiometric and Mass Spectrometric Measurements

Determination of Plutonium Isotopes (238pu, 239pu, 240pu, 241pu) in Environmental Samples Using Radiochemical Separation Combined with Radiometric and Mass Spectrometric Measurements

An Accurate Method for the Determination of 226ra Activity Concentrations in Soil

Sensitive 236 U/ 238 U Isotopic Analysis of Trace Uranium in Safeguards Environmental Samples Using Multicollector Inductively Coupled Plasma Mass Spectrometry

Radiometric determination of uranium in natural waters after enrichment and separation by cation-exchange and liquid-liquid extraction

Reaching environmental levels of 244Pu by accelerator mass spectrometry at the Centro Nacional de Aceleradores

Determination of plutonium in environmental samples by AMS and alpha spectrometry

Simultaneous determination of femtogram levels of 237Np, 239Pu, and 240Pu in environmental solid samples using extraction chromatography and ICP-MS/MS

A novel strategy for Pu determination in water samples by automated separation in combination with direct ICP-MS/MS measurement

Ultra-trace Plutonium Determination in Small Volume Seawater by Sector Field Inductively Coupled Plasma Mass Spectrometry with Application to Fukushima Seawater Samples.

Rapid determination of plutonium isotopes in small samples using single anion exchange separation and ICP-MS/MS measurement in NH3–He mode for sediment dating

Determination of Pu isotope concentrations and isotope ratio by inductively coupled plasma mass spectrometry: a review of analytical methodology

Advancements in Remote Alpha Radiation Detection: Alpha-Induced Radio-Luminescence Imaging with Enhanced Ambient Light Suppression

Determination of the 243 Cm/244 Cm ratio alpha spectrometry and spectral deconvolution in environmental samples exposed to discharges from the nuclear fuel cycle

Primary measurement of massic activity of Am-241 by cryogenic decay energy spectrometery

Verification of uranium composite materials using active interrogation techniques for safeguards purposes

A practical approach of measuring $^{238}$U and $^{232}$Th in liquid scintillator to sub-ppq level using ICP-MS

Measurement of the 240Pu/239Pu mass ratio using a transition-edge-sensor microcalorimeter for total decay energy spectroscopy