Abstract:The fabrication of a bionic super-hydrophobic metallic surface without any low-surface-energy modification is investigated, in which picosecond laser ablation, electropolishing and electrodeposition are used sequentially. The micro-cone structure is formed via laser ablation, and then the nano-pyramid structure is electrodeposited on the micro-cone structure, resulting in a hierarchical structure that is important for achieving super-hydrophobicity on an intrinsically hydrophilic material surface. In this study, the surface morphology and material removal mechanism are discussed with respect to the laser-ablated surface and the subsequent electropolished/electrodeposited surfaces. The condensation experiments results show that both types of surfaces are associated with relatively high contact angles (CAs) at normal temperatures, and the CAs are 147 degrees and 160 degrees, respectively. However, the CA on the laser-ablated surfaces at low temperatures decreases to as less as 107 degrees, which may be owing to the easy transition from Cassie state to a metastable state or even the Wenzel state, leading to a degraded hydrophobic surface. By contrast, the CA on the sequentially processed surfaces still maintains at 150 degrees, which should be attributed to the densely distributed nano-scale structures. The sequentially processed surfaces also show excellent long-term durability. Furthermore, this technique has been employed for fabricating super-hydrophobic surfaces with CM > 151 degrees and the sliding angles (SAs) < 8 degrees on the inclined surfaces with the inclination angle alpha < 30 degrees. Overall, the technique presented in this study supply a practical and reliable method for realizing the stable Cassie state and hence super-hydrophobicity on metallic surfaces.

Reduction in surface adhesion on Ni enabled by micro- and nanoscale periodic structuring in tandem

Metal Surface Nanopatterning for Enhanced Interfacial Adhesion in Fiber Metal Laminates

Study of Negative Side Wall Surface Roughness by Picosecond Photonic Impact Microdeposition

Characterizing lateral frictional properties on nanostructured periodic surface of Ni fabricated using femtosecond laser pulses

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Modeling of Smoothening Effect on Morphologies of Annealed Submicron Nickel Particles Used for Electrically Conductive Adhesives

Fabrication of Bio-Inspired Nitinol Alloy Surface with Tunable Anisotropic Wetting and High Adhesive Ability.

The effects of carbon ion implantation on wettability, abrasion, thermal and anti-corrosion stabilities of laser ablated super-hydrophobic Nitinol surface

A laser-processed micro/nanostructures surface and its photothermal de-icing and self-cleaning performance

Tunable wettability of jet electrodeposited micro-nano structures modified by laser radiation

Femtosecond Laser-Induced Evolution of Surface Micro-Structure in Depth Direction of Nickel-Based Alloy

Time-dependent Wettability of Nano-Patterned Surfaces Fabricated by Femtosecond Laser with High Efficiency

Chemical effects during the formation of various types of femtosecond laser-generated surface structures on titanium alloy

Fabrication of multifunctional titanium surfaces by producing hierarchical surface patterns using laser based ablation methods

Improvement of Electrochemical deposition Performance and Design of Fe–Ni Multilayer Structure by Nanosecond Laser

Nanostructuring of laser textured surface to achieve superhydrophobicity on engineering metal surface

Ultrafast Laser Processing of Nanostructured Patterns for the Control of Cell Adhesion and Migration on Titanium Alloy

AFM for Nanomechanical Assessment of Polymer Overcoatings on Nanoparticle-Decorated Biomaterials

Evading stability-biocompatibility tradeoff in TiNb coatings with armour-like super hydrophilic micro-nano structure surface

Formation, evolution and characterization of nanoporous structures on the Ti6Al4V surface induced by nanosecond pulse laser irradiation

Enhancing the adhesion strength and wear resistance of nanostructured NiCrN coatings