Abstract:Titanium and its alloys is the main group of materials used in prosthetics and implantology. Despite their popularity and many advantages associated with their biocompatibility, these materials have a few significant disadvantages. These include low biologic activity-which reduces the growth of fibrous tissue and allows loosening of the prosthesis-the possibility of metallosis and related inflammation or other allergic reactions, as well as abrasion of the material during operation. Searching for the best combinations of material properties for implants in today's world is not only associated with research on new alloys, but primarily with the modification of their surface layers. The proposed laser modification of the Ti13Nb13Zr alloy with a carbon nanotube coating is aimed at eliminating most of the problems mentioned above. The carbon coating was carried out by electrophoretic deposition (EPD) onto ground and etched substrates. This form of carbon was used due to the confirmed biocompatibility with the human body and the ability to create titanium carbides after laser treatment. The EPD-deposited carbon nanotube coating was subjected to laser treatment. Due to high power densities applied to the material during laser treatment, non-equilibrium structures were observed while improving mechanical and anti-corrosive properties. An electrophoretically deposited coating of carbon nanotubes further improved the effects of laser processing through greater strengthening, hardness or Young's modulus similar to that required, as well as led to an increase in corrosion resistance. The advantage of the presented laser modification of the Ti13Nb13Zr alloy with a carbon coating is the lack of surface cracks, which are difficult to eliminate with traditional laser treatment of Ti alloys. All samples tested showed contact angles between 46° and 82° and thus, based on the literature reports, they have hydrophilic surfaces suitable for cell adhesion.

The effects of carbon ion implantation on wettability, abrasion, thermal and anti-corrosion stabilities of laser ablated super-hydrophobic Nitinol surface

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Construction and parameter optimization of LPBF-NiTi alloy bionic superhydrophobic surface based on laser processing

Anti-corrosion superhydrophobic surface of LPBF- NiTi alloy fabricated by nanosecond laser machining

Fabrication of Bio-Inspired Nitinol Alloy Surface with Tunable Anisotropic Wetting and High Adhesive Ability.

Scalable Wettability Modification of Aluminum Surface through Single-Shot Nanosecond Laser Processing

Formation, evolution and characterization of nanoporous structures on the Ti6Al4V surface induced by nanosecond pulse laser irradiation

Wettability, droplet impact and anti-icing performance of micro-nano hierarchical structure on Ti6Al4V surface via integrating of chemical modification and laser-induced plasma micromachining

Fabrication of superhydrophilic or superhydrophobic self-cleaning metal surfaces using picosecond laser pulses and chemical fluorination

Superhydrophobic Surface Preparation and Wettability Transition of Titanium Alloy with Micro/Nano Hierarchical Texture

Construction of Robust Hierarchical Micro-nanostructure by Laser Irradiation and Hydrothermal Treatment on Titanium Alloy for Superhydrophobic and Slippery Surfaces

Effect of femtosecond laser processing atmosphere on micro-nano structures and wetting properties of Ti6Al4V surface

Nanostructured Superhydrophobic Titanium-Based Materials: A Novel Preparation Pathway to Attain Superhydrophobicity on TC4 Alloy

Wettability regulation from superhydrophilic to superhydrophobic via nanosecond laser ablation

Nanostructuring of laser textured surface to achieve superhydrophobicity on engineering metal surface

Evading stability-biocompatibility tradeoff in TiNb coatings with armour-like super hydrophilic micro-nano structure surface

Mechanical and Corrosion Properties of Laser Surface-Treated Ti13Nb13Zr Alloy with MWCNTs Coatings

Superhydrophobic Surface of Ti6Al4V using Direct Nanosecond Laser Texturing

Fabrication of Superhydrophobic Ti–6Al–4V Surfaces with Single-Scale Micotextures by using Two-Step Laser Irradiation and Silanization

Fabrication and droplet impact performance of superhydrophobic Ti6Al4V surface by laser induced plasma micro-machining

The effects of simultaneous laser nitriding and texturing on surface hardness and tribological properties of Ti6Al4V