Abstract:A facile and sustainable emulsion method is proposed for the preparation of CNT/PDMS‐S strain sensor with a segregated structure. The formation of a segregated structure greatly lowers the percolation threshold. Flexible strain sensors have been widely used in many fields because of their excellent adaptability and flexibility. Nonetheless, creating these sensors through simple methods that achieve a low percolation threshold and high sensitivity continues to pose a challenge. In this paper, a segregated structure was realized in a carbon nanotube/polydimethylsiloxane (CNT/PDMS‐S) strain sensor by a sustainable emulsion method that involved the mixing cellulose nanocrystals (CNCs), CNTs, PDMS and water. The incorporation of CNC improved the stability of CNTs in aqueous suspension. Consequently, The CNT@CNC nanocomposites were strategically placed in the gaps between the PDMS microspheres, creating a segregated structure. The segregated structure notably lowered the percolation threshold of the composite to 0.49 wt%. Moreover, we found that the CNT/PDMS‐S sensor containing 1.5 wt% CNTs showed excellent sensing performance, which not only had a wide strain measurement range and could adapt to the strain change from 0% to 70%, but also had high sensitivity with a gauge factor (GF) of 290 at 70% strain. Meanwhile, the sensor had an excellent linear response (R2 ≥ 0.96) and can monitor the minimum strain of 0.1%. The proposed sensor demonstrated excellent response when applied to sense wrist movement, facial movement and closure, and syllable recognition. Highlights Strain sensors with a segregated structure were realized by a sustainable method. The segregated structure greatly reduces the percolation threshold of sensor. The sensor has a high sensitivity, linearity, and wide strain detection range. The sensor features high resolution for tiny deformations sensing.

A highly stretchable carbon nanotube/reduced graphene oxide/ poly(dimethylsiloxane) composite with high thermal conductivity as a flexible strain sensor

High-performance Flexible Strain Sensors Based on Biaxially Stretched Conductive Polymer Composites with Carbon Nanotubes Immobilized on Reduced Graphene Oxide

Highly Flexible Strain Sensors Based on Polydimethylsiloxane/carbon Nanotubes (cnts) Prepared by a Swelling/permeating Method and Enhanced Sensitivity by CNTs Surface Modification

A Flexible Strain Sensor of Porous Conductive Silicone Rubber Composites Prepared from High Internal Phase Emulsion

Enhanced performance of 3D printed highly elastic strain sensors of carbon nanotube/thermoplastic polyurethane nanocomposites via non-covalent interactions

Flexible Strain Sensors with Enhanced Sensing Performance Prepared from Biaxially Stretched Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites

Thin and high conductive multi‐walled carbon nanotubes/polydimethylsiloxane composite film prepared via solvent method as strain sensors

Inherently Conductive Poly(dimethylsiloxane) Elastomers Synergistically Mediated by Nanocellulose/Carbon Nanotube Nanohybrids toward Highly Sensitive, Stretchable, and Durable Strain Sensors

Wearable Strain Sensors Based on a Porous Polydimethylsiloxane Hybrid with Carbon Nanotubes and Graphene

Highly Stretchable, Anti-Corrosive and Wearable Strain Sensors Based on the PDMS/CNTs Decorated Elastomer Nanofiber Composite

Structural and Dimensional Engineering of Three-Dimensional Carbon Nanotube/polydimethylsiloxane Composite for Stretchable Sensor

Wearable strain sensor based on highly conductive carbon nanotube/polyurethane composite fibers

Effect of Melt Mixing Conditions on the Mechanical, Electrical, and Strain Sensing Properties of Carbon Nanotube–Styrene Butadiene Styrene/Thermoplastic Polyurethane Nanocomposites with a Double-Percolation Structure

Tailoring Percolating Conductive Networks of Natural Rubber Composites for Flexible Strain Sensors Via A Cellulose Nanocrystal Templated Assembly

Flexible strain sensors based on carbon nanotubes/polydimethylsiloxane composites with a segregated structure prepared by sustainable emulsion method

The Effect of Filler Dimensionality on the Electromechanical Performance of Polydimethylsiloxane Based Conductive Nanocomposites for Flexible Strain Sensors

2D End-to-end Carbon Nanotube Conductive Networks in Polymer Nanocomposites: a Conceptual Design to Dramatically Enhance the Sensitivities of Strain Sensors.

Fabrication of electrically conductive poly(styrene-b-ethylene-ran-butylene-b-styrene)/multi-walled carbon nanotubes composite fiber and its application in ultra-stretchable strain sensor

Strain Sensing Behavior of Conductive Polymer/Carbon Nanotube Composites Coated Fiber

Highly Sensitive Flexible Strain Sensor Based on a Double-percolation Structured Elastic Fiber of Carbon Nanotube (CNT)/Styrene Butadiene Styrene (SBS) @ Thermoplastic Polyurethane (TPU) for Human Motion and Tactile Recognition

Flexible strain sensors with high sensitivity and large monitoring range prepared by biaxially stretching conductive polymer composites with a bilayer structure