Abstract:The CNT-PDMS composite has been widely adopted in flexible devices due to its high elasticity, piezoresistivity, and biocompatibility. In a wide range of applications, CNT-PDMS composite sensors were used for resistive strain measurement. Accordingly, the percolation threshold 2%~4% of the CNT weight ratio in the CNT-PDMS composite was commonly selected, which is expected to achieve the optimized piezoresistive sensitivity. However, the linear range around the percolation threshold weight ratio (2%~4%) limits its application in a stable output of large strain (>20%). Therefore, comprehensive understanding of the electromechanical, mechanical, and electrical properties for the CNT-PDMS composite with different CNT weight ratios was expected. In this paper, a systematic study was conducted on the piezoresistivity, Young’s modulus, conductivity, impedance, and the cross-section morphology of different CNT weight ratios (1 to 10 wt%) of the CNT-PDMS composite material. It was experimentally observed that the piezo-resistive sensitivity of CNT-PDMS negatively correlated with the increase in the CNT weight ratio. However, the electrical conductivity, Young’s modulus, tensile strength, and the linear range of piezoresistive response of the CNT-PDMS composite positively correlated with the increase in CNT weight ratio. Furthermore, the mechanism of these phenomena was analyzed through the cross-section morphology of the CNT-PDMS composite material by using SEM imaging. From this analysis, a guideline was proposed for large strain (40%) measurement applications (e.g., motion monitoring of the human body of the finger, arm, foot, etc.), the CNT weight ratio 8 wt% was suggested to achieve the best piezoresistive sensitivity in the linear range.

The Effect of Filler Dimensionality on the Electromechanical Performance of Polydimethylsiloxane Based Conductive Nanocomposites for Flexible Strain Sensors

Synchronously Tailoring Strain Sensitivity And Electrical Stability Of Silicone Elastomer Composites By The Synergistic Effect Of A Dual Conductive Network

The tunable sensing behaviors of flexible conductive PDMS/NCG composites via regulation of filler size prepared by a facile sedimentation method

Synthesis of Percolative Hyperelastic Conducting Composite and Demonstrations of Application in Wearable Strain Sensors

Preparation and Properties of Flexible Conductive Polydimethylsiloxane Composites Containing Hybrid Fillers

Thin and high conductive multi‐walled carbon nanotubes/polydimethylsiloxane composite film prepared via solvent method as strain sensors

Effect of Carbon Black on the Strain Sensing Property of 3D Printed Conductive Polymer Composites

Highly Sensitive Strain Sensors Based on Fragmentized Carbon Nanotube/polydimethylsiloxane Composites

Effects of non-covalent interactions on the properties of 3D printed flexible piezoresistive strain sensors of conductive polymer composites

Preparation of CNT/CNF/PDMS/TPU Nanofiber-Based Conductive Films Based on Centrifugal Spinning Method for Strain Sensors

Effect of Melt Mixing Conditions on the Mechanical, Electrical, and Strain Sensing Properties of Carbon Nanotube–Styrene Butadiene Styrene/Thermoplastic Polyurethane Nanocomposites with a Double-Percolation Structure

Wearable strain sensor based on highly conductive carbon nanotube/polyurethane composite fibers

Conductive, sensing stable and mechanical robust silicone rubber composites for large‐strain sensors

Bioinspired design of flexible strain sensor with high performance based on gradient filler distributions

Flexible Strain Sensors with Enhanced Sensing Performance Prepared from Biaxially Stretched Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites

Structural and Dimensional Engineering of Three-Dimensional Carbon Nanotube/polydimethylsiloxane Composite for Stretchable Sensor

A highly stretchable carbon nanotube/reduced graphene oxide/ poly(dimethylsiloxane) composite with high thermal conductivity as a flexible strain sensor

Highly Sensitive Flexible Strain Sensor Based on a Double-percolation Structured Elastic Fiber of Carbon Nanotube (CNT)/Styrene Butadiene Styrene (SBS) @ Thermoplastic Polyurethane (TPU) for Human Motion and Tactile Recognition

Recent development of conductive polymer composite‐based strain sensors

Flexible strain sensors with high sensitivity and large monitoring range prepared by biaxially stretching conductive polymer composites with a bilayer structure

Optimized CNT-PDMS Flexible Composite for Attachable Health-Care Device