Abstract:Mg-based amorphous alloys are one of the potential hydrogen storage materials. The challenges which are blocking application of such alloys involve unfavorable crystallization of amorphous phase in hydrogenation and dehydrogenation and sluggish low-temperature de/hydrogenation kinetics. To solve those challenges, the Mg60RExNi30-xCu10 (RE=La and Ce; x = 5, 7.5, 10 and 15) amorphous alloys were prepared by melt spinning and the structural transformation of amorphous phase and its correlation to hydrogenation ki-netics has been investigated. It is observed that all the amorphous powders are able to absorb more than 3.0 wt%-H at 130 degrees C under 4.5 MPa-H-2, and the hydrogen absorption rate of the Mg60RE10Ni20Cu10 amorphous alloys is much faster than other alloys by forming a dual amorphous phase structure during hydrogenation. XRD characterization of Mg60Ce10Ni20Cu10 hydrides proved that such dual amorphous phase structure is resulted by hydrogen-induced amorphous phase separation. According to EDX results, the dual amorphous phase structure consists of Ce-rich and Ni-Cu-rich domains with a size of about 5 nm which gradually form by element aggregation during hydrogen absorption. Meanwhile, it is also confirmed that the element aggregation is the precursor of hydrogen-induced crystallization as crystallization is observed in the Ni-Cu-rich domain. It is verified that the hydrogen-induced amorphous phase separation of the Mg-based amorphous alloys is tunable and can be used for obtaining superior hydrogenation performance. The hydrogen-induced structural evolution revealed in this work might inspire the development of new Mg-based hydrogen storage amorphous alloys. (C) 2021 Published by Elsevier B.V.

Grain refinement and improved hydrogen storage performance of nanostructured Mg-Ni-La alloys by amorphous crystallization exerting hydrogen atmosphere

Preparation and Properties of Mg-based Hydrogen Storage Alloys for Hybrid Electric Vehicle

Experimental and Theoretical Investigation on the Enhanced Hydrogen Storage Performance of Ti–Cr–Mn–Fe-Based Alloys Modified by Nb Substitution

Grain Refining Effect of Magnetic Field on Mg2ni0.8mn0.2 Hydrogen Storage Alloys During Rapid Quenching

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Remarkably Improved Hydrogen Storage Properties of Carbon Layers Covered Nanocrystalline Mg with Certain Air Stability

Crystal structure and microstructure of rapidly solidified La(Ni, Sn)(5+x)(x=0.1-0.4) hydrogen storage alloys

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Microstructure and hydrogen storage property of as-milled La–Y–Mg–Ni alloy

Microstructures and hydrogen storage characteristics of nanocrystal/amorphous Mg17Al12 alloy prepared by ball-milling

Effect of novel La-based alloy modification on hydrogen storage performance of magnesium hydride: First-principles calculation and experimental investigation

Modifying microstructures and hydrogen storage properties of 85 mass% Mg-10 mass% Ni-5 mass% la alloy by ultra-high pressure

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Achieving Fast Hydrogenation by Hydrogen-Induced Phase Separation in Mg-based Amorphous Alloys

Improving hydrogen storage performance of Mg-based alloy through microstructure optimization

Significantly improved hydrogen desorption property of La 2 Mg 17 alloy modified with Ni–Al nanocrystalline

Microstructure Evolution and Controlled Hydrolytic Hydrogen Generation Strategy of Mg-rich Mg-Ni-La Ternary Alloys

Thermally stable La-Ni-B amorphous additives for enhancing hydrogen storage performance of MgH2

Hydrogen Storage Properties of La1.8Ca0.2Mg14Ni3 Alloy Prepared by Ball Milling in Different Milling Environments

Synergistic effects of La2Mg17/Ni/H system on hydrogen storage

Y and Ni microalloying on Mg/MgH 2 for enhancing the hydrogenation and dehydrogenation performance