Abstract:Large timber buildings, formed from both light and heavy timber construction, are becoming increasingly common in Europe. Many multiple-occupancy timber buildings, such as apartment blocks, are now constructed to greater heights and in densely populated urban locations. The fire-resistance performance of such timber buildings is generally related to the standard fire test. Alternatively, EN 1995-1-2 may be used to demonstrate fire resistance by means of calculation or numerical modelling. The latter is currently limited to standard fire exposure. In addition, modelling approaches are often avoided as many numerical codes do not normally offer the capability to model timber exposed to fire. The most obvious barrier is incorporating the different tensile and compressive strength/stiffness degradation with increasing temperature. Unlike many other structural materials, it is not possible to define a single relationship between timber Modulus of Elasticity (MoE) and temperature. When timber design is advanced to a ‘performance-based’ level further complexities will arise. For example, the definition of structure temperatures for non-standard fires is a difficult task, and assessment of strength/stiffness degradation on the basis of temperature alone is not sufficient due to char formation. As a result, when cooling is considered, material properties based upon stress state, temperature and temperature history are needed. To address the above limitations, a number of developments, which can be used with general FEA software, such as DIANA, to design timber structures for fire, are presented. The developments are incorporated via user-supplied subroutines written in FORTRAN code. The routines include code for determining MoE and strength based upon stress state, temperature and temperature history. They are implemented as part of a total strain-based constitutive model. The implementation of the routines is demonstrated using a simple continuous beam. The example is also used to demonstrate how compartmentation provisions and aspects of whole building behaviour can be used to better design large-section timber buildings. Comparisons are made with simple empirical approaches presented in EN 1995-1-2. Extensions to ‘performance-based design’ using parametric fires are also discussed.

Fire resistance and burnout resistance of timber columns

Experimental investigation of structural failure during the cooling phase of a fire: Timber columns

Effects of sustained axial load and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Effects of preload and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Experimental Studies on Glubam Columns under Axial Compression

Effects of sustained axial load and cooling phase on post-fire behaviour of reinforced concrete stub columns

Cyclic Behaviours Of Concrete-Filled Steel Tubular Columns With Pre-Load After Exposure To Fire

Fire Behavior and Performance of Concrete-Filled Steel Tubular Columns: Review and Discussion

Advanced Fire Design of Timber Structures Using Computational Techniques - Simple Indeterminate Structures

Review of fire experiments in mass timber compartments: Current understanding, limitations, and research gaps

Relationships between wood properties and fire performance of glulam columns made from six wood species commonly used in China

Experimental and Numerical Analysis of Residual Load-Carrying Capacity of Cross-Laminated Timber Walls after Fire

Modelling the Response of Timber Beams Under Fire

Buckling of timber columns exposed to fire

Experimental and numerical analysis on fire behaviour of loaded cross-laminated timber panels

Experimental study on fire resistance of traditional timber mortise-tenon joints with damages

Behavior of Cross-Shaped Stiffened Concrete-Filled Steel Tubular Stub Columns after Fire Exposure

Fire resistance evaluation of laminated bamboo lumber column under eccentric compression

Full-Scale Fire Experiments on Cross-Laminated Timber Residential Enclosures Featuring Different Lining Protection Configurations

Dynamic progressive collapse of steel moment frames under different fire scenarios

Thermal Responses of Woods Exposed to High Temperatures Considering Apparent Thermo-Physical Properties