Abstract:Low temperature proton exchange membrane water electrolyzer (PEMWE) represents a critical technology for green hydrogen production. It offers the advantages of significantly higher current density and higher H 2 purity, rendering it a preferred technology when high energy efficiency and low footprint are essential. Working in the oxidative and acidic environment under high polarization voltage, however, adds substantial demand to the electrode catalyst and the support. This is particularly the case at anode where the oxygen evolution reaction (OER) takes place. At present, the platinum group metal (PGM) materials such as Ir black or Ir oxide are catalysts of choice. Their high cost and limited reserve add a significant cost barrier to PEM electrolyzer, which contributes to the overall expense of hydrogen production next only to the cost of electricity. Replacing Ir with earth-abundant transition metal oxides could help to reduce the electrolyzer system cost. For PEMWE application, a PGM-free anodic catalyst must be highly active to match the performance of Ir. Furthermore, it must be stable against oxidative acid corrosion. At Argonne National Laboratory, we recently developed a new PGM-free OER of a nanofibrous cobalt spinel catalyst co-doped with lanthanum and manganese (LMCF). [1] The catalyst was synthesized from the precursor of cobalt zeolitic methyl-imidazolate framework (Co-ZIF) doped with manganese and lanthanum. The Co-ZIF was mixed with a polymer solution and electrospun into nanofiber before being converted to fibrous cobalt spinel under low temperature oxidation to remove all the organics and carbon. The new PGM-free catalyst demonstrated a low overpotential of 353 mV (RHE) at 10 mA/cm 2 and a low OER degradation over 360 hours in acidic electrolyte. A PEMWE containing this catalyst at its anode at ~2.0 mg/cm 2 demonstrated a current density of 2000 mA/cm 2 at 2.47 volts (Nafion® 115 membrane) or 4000 mA/cm 2 at 3.00 volt (Nafion® 212 membrane). The membrane electrode was also subjected to accelerated-stress-test (AST) in both voltage cycling and galvanostatic run at different current densities. Low degradation rates under both ASTs were observed. In addition to catalyst design and synthesis, we also conducted extensive structural characterizations, stability measurement, as well as computational modeling. Our in situ study found that the OER process involves significant lattice oxygen movement, leading to lowering instead of raising the cobalt oxidation state during the electrolysis. The measurement of the stability number, combined with computational Pourbaix diagram, elucidated the importance of the operating potential in reducing catalyst dissolution. These findings offer in-depth understanding and direction of future development for PGM-free OER catalyst in PEM water electrolyzer. Acknowledgement : This work is supported by the U.S. Department of Energy, Office of Energy Efficiency and Renewal Energy, Hydrogen and Fuel Cell Technologies Office, and by Laboratory Directed Research and Development funding of Argonne National Laboratory, provided by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DEAC02-06CH11357. Work performed at the Center for Nanoscale Materials and Advanced Photon Source, both U.S. Department of Energy Office of Science User Facilities, was supported by the U.S. DOE, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. [1] “La- and Mn-doped cobalt spinel oxygen evolution catalyst for proton exchange membrane electrolysis” Lina Chong, Guoping Gao, Jianguo Wen, Haixia Li, Haiping Xu, Zach Green, Joshua D. Sugar, A. Jeremy Kropf, Wenqian Xu, Xiao-Min Lin, Hui Xu, Lin-Wang Wang, Di-Jia Liu, Science 380, 609–616 ( 2023 )

Regulating the Third Metal to Design and Engineer Multilayered NiFeM (M: Co, Mn, and Cu) Nanofoam Anode Catalysts for Anion‐Exchange Membrane Water Electrolyzers

Novel Large-scale Integrated Non-Precious Metal Electrodes for Efficient and Stable Oxygen Evolution Reaction at High Current Density in 2.5 Kw Anion Exchange Membrane Water Electrolysis

Three-Dimensional Unified Electrode Design Using a NiFeOOH Catalyst for Superior Performance and Durable Anion-Exchange Membrane Water Electrolyzers

NiFeOx and NiFeCoOx Catalysts for Anion Exchange Membrane Water Electrolysis

High Performance Anion Exchange Membrane Water Electrolyzer Using Monolayer Nickel-Iron Layered Double Hydroxide As Anode Catalysts

N, P co-doped Ni/Mo-based multicomponent electrocatalysts in situ decorated on Ni foam for overall water splitting

Enhanced Local Ion Transport in High-Performance Anion Exchange Membrane Water Electrolyzers Via Quaternary Ammonium-Functionalized Metal-Organic Framework Electrocatalysts

High-Performing Anion Exchange Membrane Water Electrolysis Using Self-Supported Metal Phosphide Anode Catalysts and an Ether-Free Aromatic Polyelectrolyte

Non-precious high entropy alloys and highly alkali-resistant composite membranes based high performance anion exchange membrane water electrolyzers

Nickel Nanoplates Enclosed by (111) Facets as Durable Oxygen Evolution Catalysts in Anion Exchange Membrane Water Electrolyzers

High-performance anion-exchange membrane water electrolysers using NiX (X = Fe,Co,Mn) catalyst-coated membranes with redox-active Ni–O ligands

Anodic/Cathodic Properties of Ni Based Catalysts for Anion Electrolyte Membrane Water Electrolysis

An oxide-promoted, self-supported Ni4Mo catalyst for high current density anion exchange membrane water electrolysis

3D Transition Metal Boride Monolithic Electrode for Industrial Hectoampere-Level Current Anion Exchange Membrane Water Electrolysis

PGM-Free Oxygen Evolution Reaction Catalyst for PEM Water Electrolysis – a Mechanistic Study on Activity and Durability for Practical Applications

Performance and Durability of Membrane-Electrode Assemblies Using Non-Precious Metal Catalyst and a Hydrocarbon-Based Electrolyte for Anion Exchange Membrane Water Electrolysis

Composition‐Dependent Morphology, Structure, and Catalytical Performance of Nickel–Iron Layered Double Hydroxide as Highly‐Efficient and Stable Anode Catalyst in Anion Exchange Membrane Water Electrolysis

Development of Ni–Fe Based Ternary Metal Hydroxides As Highly Efficient Oxygen Evolution Catalysts in AEM Water Electrolysis for Hydrogen Production

Development of Ternary Layered Double Hydroxide Oxygen Evolution Reaction Electrocatalyst for Anion Exchange Membrane Water Electrolysis

PGM-Free Catalysts and Electrodes for Anion Exchange Membrane Water Electrolyzers

Performance Evaluation and Durability Analysis of NiFeCoOx Catalysts for Alkaline Water Electrolysis in Anion Exchange Membrane Electrolyzers