Abstract:With the rapid development of key industries such as new energy vehicles, smart homes, smart phones and consumer grade drones, the demand for high performance miniature micro- pressure sensors is also growing promptly. At prssent, most of the pressure sensors of this type adopt a C-type structure, and the thickness of the sensitive diaphragm needs to be continuously thinned in order to improve the sensitivity of this type sensor, which leads to its sensitivity to etching errors and makes it difficult to ensure the linearity of the pressure sensor. Based on this, we designed a miniature micro-pressure half active Wheatstone bridge piezoresistive pressure sensor with C-type square diaphragm structure, whose area is reduced by shortening the number of leads and pads, through ion impantation on the surface of the diaphragm to create a piezoresistors, using deep reactive ion etching (DRIE) technology to release the pressure sensitive diaphragm with length of 460 μm × 460 μm, thinkness of 7.5 μm. The buried oxygen layer in the SOI(silicon on insulator) can play a role of stopping the etching, which assures the uniformity of the released sensitive diaphragm and the non-linear errors of the sensor while maintains its sensitivity. In this paper, the influence of piezoresistor position offset on the performance of the pressure sensor is analyzed by means of simulation, which improves the accuracy of the designed model and guarantees its performance parameters can meet the design indicators. Finally, the static characteristics of the sensor is calibrated. The experimental results show that the sensitivity of the sensor is up to 0.538 mV kPa-1/3.5 V in the range of 40 kPa at room temperature, and the non-linear error is only 0.386 % FS. This study provides some new ideas and references for the design work of high performance micro-pressure sensors.

Pressure Sensor with New Electrical Circuit Utilizing Bipolar Junction Transistor

High-sensitivity MEMS pressure sensor utilizing bipolar junction transistor with temperature compensation

Pressure Sensor Chip with New Electrical Circuit for 10 kPa Range

A Flexible Crosstalk-Free Piezoresistive Pressure Sensor Array Based on Interdigital-Electrode for High-Precision Pressure Mapping

A Soft Piezoresistive Pressure Sensor Based on Porous Conductive CB/PDMS Composite

High Sensitivity Photoelectric Pressure Sensor Based on A Monolithic Dual Photodiode

Organic-inorganic hybrid piezotronic bipolar junction transistor for pressure sensing

A novel MEMS pressure sensor with MOSFET on chip

An Integrated Pressure Transducer for Biomedical Applications

A High Sensitive Pressure Sensor with the Novel Bossed Diaphragm Combined with Peninsula-Island Structure

Ultrasensitive Pressure Sensor Based on an Integrated Circular Piezoelectric MEMS Resonator and Diaphragm Structure

Prefabrication design, theoretical framework and simulation demonstration of a meander-shaped MEMS piezoresistive pressure sensor implanted on silicon substrate circular diaphragm for enhancement of key performance parameters utilized for low-pressure applications

An Integrated Pressure and Magnetic Field Sensor Based on Piezoresistance Effect

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity

A Multi-Terminal Pressure Sensor with enhanced sensitivity

A high pressure sensor with circular diaphragm based on MEMS technology

Design and simulation of a novel dual current mirror based CMOS‐MEMS integrated pressure sensor

A Novel Dual-Functional MEMS Sensor Integrating Both Pressure and Temperature Units

A High-Dynamic and Ultra-Low Pressure Sensor with a Novel Beam-Island-Membrane Structure

Integrated Pressure Sensor with Stress-Sensitive MOS Operational Amplifier

Novel Resonant Pressure Sensor Based on Piezoresistive Detection and Symmetrical In-Plane Mode Vibration