Extracting salt from soil with ceramic sheets

Faycel Khemili Chaouki Gobaa Mustapha Najjari a University of Monastir,National Engineering School of Monastir,LESTE,Monastir,Tunisiab University of Hafr Al Batin,College of Science,Hafar Al Batin,Kingdom of Saudi Arabiac University of Gabes,National Engineering School of Gabes,Zirig,Gabes,Tunisia

DOI: https://doi.org/10.1080/07373937.2024.2392143

IF: 3.3

2024-08-18

Drying Technology

Abstract:The study investigates the drying behavior and desalination effectiveness of porous ceramic tiles made from fired clay materials like bricks or pottery on soil columns initially saturated with saline solution. Evaporation kinetics experiments compared the drying of saline soil with and without a ceramic tile. For soil without a ceramic cover, salt precipitation formed an efflorescent crust that initially ( t ∼ 30 h) reduced the evaporation rate. However, with continued drying, the tensile stress caused cracks in the crust, allowing increased evaporation through the cracks ( t > 200 h). When covered with a ceramic poultice, the saline solution was wicked into the porous ceramic by capillary action. Rapid salt efflorescence was observed on the ceramic surface. The ceramic layer initially reduced the soil evaporation rate due to pore clogging caused by salt precipitation. The pore structure characteristics of the ceramics significantly impacted their desalination performance. After an initial fast drying period controlled by evaporation, a reduced drying rate was observed as salt clogging effects became dominant, especially for the low porosity ceramic ( t ∼20 h). The porous ceramic poultices could effectively extract salts from the soil, but their desalination efficiency depended critically on their pore structure properties. An industrial-based clay ceramic with large and more connected pores (porosity 0.33) was found to be around 62% more efficient in removing NaCl than a handmade pottery with small pores (porosity 0.18).

engineering, chemical, mechanical