Abstract:Flexible photodetectors (PDs) are attracting more attention due to their promising applications in wearable optoelectronic devices, bendable imaging sensors, and implantable optoelectronics. For the easy‐processable technology of massively fabricating PDs, instead of the expensive and complex high‐vacuum technique, the well‐matched work function of their active materials is essential. Herein, all‐sprayed‐processable and large‐area PDs are demonstrated on common paper based on two‐dimensional (2D) CsPbBr3 nanosheets and conductive Ti3C2Tx (MXene). Ascribed to the superior conductivity of MXene, high crystallinity of 2D CsPbBr3, and their well‐matched work function, the as‐prepared PDs exhibit an outstanding on/off current ratio up to 2.3 × 103 and a remarkable photoresponse as fast as 18 ms. Specifically, the detectivity (D*) of 6.4 × 108 Jones and responsivity (R) of 44.9 mA W−1 under a bias of 10 V are achieved. Besides, after bending 1500 cycles, the as‐prepared PDs can still maintain the excellent flexibility and stability. Based on this, a superior‐quality and large‐area 1665 pixel sensor in 72 cm2 (≈24 units cm−2) is developed, and it can clearly transmit the image of “0” to realize the photocommunication function. This work provides a low‐cost method of massively producing the flexible large‐area PDs for wearable optoelectronic devices and expanded photocommunication. The on‐paper flexible photodetectors based on 2D perovskite nanosheets and Ti3C2Tx (MXene) as the active materials and electrode materials by all‐spraying method are demonstrated. The low‐cost photodetectors have high stability, flexibility, photoelectric performance, and can effectively realize the optical communication function of image sensing by large‐area arrays. This technique can be potentially expanded to other optoelectronic devices.

Large-area flexible colloidal-quantum-dot infrared photodiodes for photoplethysmogram signal measurements

A High-resolution Colloidal Quantum Dot Imager by Monolithic Integration

Electrode Engineering of Colloidal Quantum Dot Photodetectors Using a Self-Assembled Island-like LiF Interfacial Layer

Near‐Infrared Organic Photodetectors toward Skin‐Integrated Photoplethysmography‐Electrocardiography Multimodal Sensing System

Large‐Area, Semitransparent, and Flexible All‐Polymer Photodetectors

Colloidal PbS Quantum Dot Photodiode Imager with Suppressed Dark Current

Self-powered all-quantum dot based broadband photodetectors for color imaging and heart rate monitoring

Flexible Non-Fullerene Organic Photodetectors Enabled by a Tin Ions-Chelated Polymer Cathode Interfacial Layer

A Colloidal-Quantum-Dot Infrared Photodiode with High Photoconductive Gain.

Passivating {100} Facets of PbS Colloidal Quantum Dots via Perovskite Bridges for Sensitive and Stable Infrared Photodiodes

Ultraflexible Integrated Organic Electronics for Ultrasensitive Photodetection

Planar Cation Passivation on Colloidal Quantum Dots Enables High-Performance 0.35-1.8 µm Broadband TFT Imager

Flexible and Robust 3D A‐sige Radial Junction Near‐Infrared Photodetectors for Rapid Sphygmic Signal Monitoring

Quarter-Annulus Si-Photodetector with Equal Inner and Outer Radii of Curvature for Reflective Photoplethysmography Sensors

Flexible InGaAs Photodetector With High-Speed Detection and Long-Term Stability

Tailoring of colloidal quantum dot layer thickness for highly efficient short-wavelength infrared photodiode

High performance visible-SWIR flexible photodetector based on large-area InGaAs/InP PIN structure

Silicon-based PbS-CQDs infrared photodetector with high sensitivity and fast response

High stability of dark current enables stretchable near-infrared self-powered organic photodetectors

Ultraflexible Ring‐Shaped Organic Photodetectors for Motion Artifact‐Less Photoplethysmography

All‐Sprayed‐Processable, Large‐Area, and Flexible Perovskite/MXene‐Based Photodetector Arrays for Photocommunication