Abstract:The injection of steam into a viscous oil reservoir as an enhanced oil recovery method is a mature technology. However, due to steam’s high mobility, this process can suffer from gravity override and loss to thief zones. Steam foam has been used successfully since the 1970s to improve the sweep efficiency of steam processes by temporarily increasing the apparent viscosity of steam. One of the important issues in steam foam design that will be addressed in the following study is that no commercially available cost-effective surfactants existed that would allow the creation of steam foam at elevated temperatures (above 200 °C). While alpha olefin sulfonates have been commonly used as a foaming agent, the thermal stability of this surfactant changes with temperature. In this study, a new class of alkyl propoxy ethoxy ether carboxylate (alkyl PO EO ECA) surfactants were evaluated. Surfactant solutions at 1 wt.% were aged at up to 250 °C. The degradation of the surfactants was quantified based on high-performance liquid chromatography. The foaming performance of the surfactants was evaluated at varied temperatures from 100 to 250 °C in a high-pressure visual cell. Sandpack flooding experiments were performed to evaluate the ability of surfactants to increase foam viscosity. The results showed that alkyl PO EO ECA surfactants exhibit excellent chemical stability at up to 250 °C. However, the stability of these surfactants is dependent on the hydrophobic structure as well as the numbers of PO and EO units. An increase in the hydrophobic chain length up to C17 improved initial bulk foam volume, but not foam stability. Having higher degrees of ethoxylations with long and/or highly branched hydrophobes reduces the degradation of the surfactant at high temperature. The addition of PO into the surfactant molecular structure significantly improves the chemical stability of the surfactant. The most promising ECA structure demonstrated to be excellent foaming agents that were able to generate stable foam at 250 °C, and to increase foam viscosity by three orders of magnitude at 250 °C in sandpacks. In the presence of bitumen, these surfactants were able to increase foam viscosity by two orders of magnitude. This increase in the apparent viscosity would be sufficient to overcome the steam override and channeling during steam injection. The findings of this study have advanced our understanding of the structure–property relationships that can be used to optimize surfactants as foaming agents for thermal EOR processes at up to 250 °C.

Formula optimization of thermosensitive biological sol–gel carrier for EOR surfactants by rheological investigation

Temperature-Responsive Hydrogel Carrier for Reducing Adsorption Loss of Petroleum Sulfonates

Fabrication of surfactant-biopolymer combined system with dual viscosity reduction and mobility controllability for heavy oil reservoirs

Experimental studies and computational exploration on an exceptionally salt/condensate resistant gas well foaming mixture compromising amino-betaine-ammonium surfactants and dodecanol

Structure and Rheological Properties of Glycerol Monolaurate-Induced Organogels: Influence of Hydrocolloids with Different Surface Charge

Temperature/salt tolerance and oil recovery of xanthan gum solution enhanced by surface-modified nanosilicas

Dynamic Interfacial Tension Behaviors Between Guerbet Betaine Surfactants Solution and Daqing Crude Oil

Performance of surfactant blend formulations for controlling gas mobility and foam propagation under reservoir conditions

Long-Term Thermal Stability of Ionic Surfactants for Improving Oil Production at High-Salinity High-Temperature Conditions

Sodium Alginate Aerogel As a Carrier of Organogelators for Effective Oil Spill Solidification and Recovery.

Research on Performance Evaluation of Polymeric Surfactant Cleaning Gel-Breaking Fluid (GBF) and Its Enhanced Oil Recovery (EOR) Effect

Design of Extended Surfactant-Only EOR Formulations for an Ultrahigh Salinity Oil Field by Using Hydrophilic Lipophilic Deviation (HLD) Approach: from Laboratory Screening to Simulation

Formulation evaluation of an innovative composite foamed gel with high temperature and salinity compatibility in heavy oil reservoirs

Studies on interfacial tensions of betaine and anionic-nonionic surfactant mixed solutions

New molecular and macroscopic understandings of novel green chemicals based on Xanthan Gum and bio-surfactants for enhanced oil recovery

Systematic Investigation of the Physicochemical Properties of Eco-Friendly Biobased Anionic-Nonionic Surfactants for Enhanced Oil Recovery

An experimental investigation of surfactant structure–property relationship for foam mobility control in thermal EOR processes

Emulsification and interfacial characteristics of different surfactants enhances heavy oil recovery: experimental evaluation and molecular dynamics simulation study

Rheological Properties of Mixed Aqueous Solutions of Geminis (12‐3‐12,2br−) and SDS

Investigation of a highly efficient foaming mixture compromising cationic Gemini-zwitterionic-anionic surfactants for gas well deliquification

Host-guest strategy improves rheological properties, conformational stability and oil displacement efficiency of xanthan gum