Dual-spherical-wave optical scanning holographic microscopy with resolution enhancement and an extended depth of field

Jung-Ping Liu,Chen-Hsiang Huang

DOI: https://doi.org/10.1364/ao.527739

IF: 1.9

2024-10-16

Applied Optics

Abstract:Jung-Ping Liu, Chen-Hsiang Huang Conventional optical scanning holographic microscopy (OSHM) is realized by using a plane wave and a spherical wave as the illumination. The ... [Appl. Opt. 63, 7929-7934 (2024)]

optics

What problem does this paper attempt to address?

Depth resolution enhancement in double-detection optical scanning holography.

Haiyan Ou,Ting-Chung Poon,Kenneth K Y Wong,Edmund Y Lam

DOI: https://doi.org/10.1364/AO.52.003079

IF: 1.9

2013-01-01

Applied Optics

Abstract:We propose an optical scanning holography system with enhanced axial resolution using two detections at different depths. By scanning the object twice, we can obtain two different sets of Fresnel zone plates to sample the same object, which in turn provides more information for the sectional image reconstruction process. We develop the computation algorithm that makes use of such information, solving a constrained optimization problem using the conjugate gradient method. Simulation results show that this method can achieve a depth resolution up to 1 mu m. (C) 2013 Optical Society of America
Enhanced Depth Resolution in Optical Scanning Holography Using a Configurable Pupil

Haiyan Ou,Ting-Chung Poon,Kenneth K. Y. Wong,Edmund Y. Lam

DOI: https://doi.org/10.1364/prj.2.000064

IF: 7.6

2014-01-01

Photonics Research

Abstract:The optical scanning holography (OSH) technique can capture all the three-dimensional volume information of an object in a hologram via a single raster scan. The digital hologram can then be processed to reconstruct individual sectional images of the object. In this paper, we present a scheme to reconstruct sectional images in OSH with enhanced depth resolution, where a spatial light modulator (SLM) is adopted as a configurable point pupil. By switching the SLM between two states, different Fresnel zone plates (FZPs) are generated based on the same optical system. With extra information provided by different FZPs, a depth resolution at 0.7 μm can be achieved.
Dual-wavelength slightly off-axis digital holographic microscopy.

Junwei Min,Baoli Yao,Peng Gao,Rongli Guo,Baiheng Ma,Juanjuan Zheng,Ming Lei,Shaohui Yan,Dan Dan,Tao Duan,Yanlong Yang,Tong Ye

DOI: https://doi.org/10.1364/AO.51.000191

IF: 1.9

2012-01-01

Applied Optics

Abstract:We propose dual-wavelength digital holographic microscopy with a slightly off-axis configuration. The axial measurement range without phase ambiguity is extended to the micrometer range by synthesizing a beat wavelength between the two wavelengths with separation of 157 nm. Real-time measurement of the specimen is made possible by virtue of the high wavelength selectivity of the Bayer mosaic filtered color CCD camera. The principle of the method is exposed, and the practicability of the proposed configuration is demonstrated by the experimental results on a vortex phase plate and a rectangular phase step. (C) 2012 Optical Society of America
Dual-wavelength Resolution Matching Digital Holographic Microscopy Using One Path Structured Illumination

Meng Huang,Yang Han,Zhuqing Jiang

DOI: https://doi.org/10.1364/optcon.512332

2024-01-01

Optics Continuum

Abstract:A dual-wavelength resolution-matching digital holographic microscopy with one path structured illumination is presented, which can improve phase imaging resolution. In this configuration, a dual-wavelength hologram with two illumination modes corresponding to two different wavelengths can be flexibly recorded at one shot, and the imaging resolutions under the two wavelengths can reach equivalence by setting the modulation frequency of structure illumination. The expression for calculating the modulation frequency of structured illumination in a two-wavelength system is given. By setting the proper modulation frequency, the resolution of dual-wavelength phase imaging can be enhanced, which is verified in the phase imaging experiment of a USAF quantitative phase target. The dual-wavelength reconstructed phase map of paramecia cells exhibit the internal macronucleus, food vacuole and cilia. The imaging results demonstrate the resolution-matching approach using one path structured-illumination in effect for the improvement of phase imaging resolution.
High Resolution Digital Holographic Microscopy with A Wide Field of View Based on A Synthetic Aperture Technique and Use of Linear Ccd Scanning

Jianglei Di,Jianlin Zhao,Hongzhen Jiang,Peng Zhang,Qi Fan,Weiwei Sun

DOI: https://doi.org/10.1364/ao.47.005654

IF: 1.9

2008-01-01

Applied Optics

Abstract:Theoretical analysis shows that, to improve the resolution and the range of the field of view of the reconstructed image in digital lensless Fourier transform holography, an effective solution is to increase the area and the pixel number of the recorded digital hologram. A new approach based on the synthetic aperture technique and use of linear CCD scanning is presented to obtain digital holographic images with high resolution and a wide field of view. By using a synthetic aperture technique and linear CCD scanning, we obtained digital lensless Fourier transform holograms with a large area of 3.5 cm x 3.5 cm (5000 x 5000 pixels). The numerical reconstruction of a 4 mm object at a distance of 14 cm by use of a Rayleigh-Sommerfeld integral shows that a theoretically minimum resolvable distance of 2.57 microm can be achieved at a wavelength of 632.8 nm. The experimental results are consistent with the theoretical analysis.
Single-Shot Common-Path Off-Axis Dual-Wavelength Digital Holographic Microscopy Based on Two-Dimensional Grating Diffraction

Jieyu Wang,Xue Wang,Zhao Dong,Huaying Wang,Qiaofen Zhu,Gaofu Men,Yafei Gao,Wenjian Wang

DOI: https://doi.org/10.3389/fphy.2022.822714

IF: 3.718

2022-01-01

Frontiers in Physics

Abstract:We present a single-shot dual-wavelength common-path off-axis digital holographic microscopic (CO-DHM) imaging method based on two-dimensional grating diffraction. This method improves the utilization rate of the interference field under the limited photosensitive size of the camera, and further expands the original camera’s field of view (FOV). In addition, the mode of orthogonal carrier frequencies close to the diagonal direction can optimize the utilization of the camera’s spatial bandwidth. Compared with the traditional dual-wavelength CO-DHM using one-dimensional grating or prism beam splitting, this method effectively avoids the aliasing of high-frequency components of the +1-order spectrum of different wavelengths in the frequency domain. We provide quantitative phase imaging experiments for the full FOV of USAF resolution chart, onion epidermal cells and standard polystyrene beads. The results prove that the system can enlarge the interferometric FOV by nearly 74.0% without changing the imaging parameters, such as magnification and resolution, and can achieve high-precision quantitative phase imaging with only a single hologram.
Long-working-distance synthetic aperture Fresnel off-axis digital holography.

Pan Feng,Xiao Wen,Rong Lu

DOI: https://doi.org/10.1364/OE.17.005473

IF: 3.8

2009-01-01

Optics Express

Abstract:An aperture synthesis approach of digital holography for microscopy imaging at long working distance is proposed. Firstly, for an oblique object, a series of Fresnel off-axis holograms are recorded with different tilted plane wave illuminations without using lens for pre-magnification. Then the complex amplitudes are reconstructed and magnified from these holograms by the double-step Fresnel reconstruction method respectively. Finally, the synthesized image of the resolution enhanced and the speckle suppressed is obtained by incoherent superposition of these reconstructed complex amplitudes. The important advantage of the proposed approach is that the working distance of the system isn't constrained and the reconstructed image doesn't subject to lens aberrations. The experimental results with a die and an USAF-1951 resolution test target are shown and demonstrated that the resolution of both intensity and phase image can be effectively enhanced with simple set-up and procedure. The proposed approach can improve the capabilities of digital holography in three-dimensional in-situ microscopy at long working distance. (C) 2009 Optical Society of America
Off-axis Optical Scanning Holography [Invited].

Yaping Zhang,Yongwei Yao,Jingyuan Zhang,Jung-Ping Liu,Ting-Chung Poon

DOI: https://doi.org/10.1364/josaa.444745

2021-01-01

Journal of the Optical Society of America A

Abstract:Optical scanning holography (OSH) involves the principles of optical scanning and heterodyning. The use of heterodyning leads to phase-preserving, which is the basic idea of holography. While heterodyning has numerous advantages, it requires complicated and expensive electronic processing. We investigate an off-axis approach to OSH, thereby eliminating the use of heterodyning for phase retrieval. We develop optical scanning theory for holographic imaging and show that by properly designing the scanning beam, we can perform coherent and incoherent holographic recording. Simulation results are provided to verify the proposed idea.
High Resolution Digital Holography Based on the Point Source Scanning

Minchao Wang,Dayong Wang,Lu Rong,Yunxin Wang,Fengpeng Wang,Qiaowen Lin

DOI: https://doi.org/10.1117/12.2245428

2017-01-01

Abstract:Digital holographic microscopy has been widely used for the imaging of micro-objects and biological samples. Lensless in-line digital holographic microscopy is capable of wide field-of-view imaging. However the spatial resolution of the reconstructed images is limited by the pixel size of the detector. The relative position shift between the sample and the detector can effectively improve the resolution in the traditional sub-pixel shifting method, but it requires a high precision of translation stage. To overcome this problem, we propose a method based on the point source scanning to realize sub-pixel shifting. High precision sub-pixel shifting is achieved easily by using the geometric between point source and detector. Through moving the point source, multiple holograms with sub-pixel shifts are captured. These holograms are merged together to obtained a high resolution hologram by a synthesizing algorithm. Then, the high resolution reconstructed image of the object can be obtained by the angular spectrum algorithm. The feasibility of the proposed method is demonstrated by simulation and experiments. A USAF resolution test target was used as the object. Compared with the traditional digital holography, a higher resolution reconstructed image is obtained by our method. The proposed method has the advantages of simple recording setup and lower precision requirement of the translation stage. It can achieve the wide field-of-view and high resolution imaging.
Two-Step Converging Spherical Wave Diffracted at a Circular Aperture of Digital In-Line Holography

Peng Tian,Liang He,Xiaoyi Guo,Zeyu Ma,Ruiqi Song,Xiaoqiao Liao,Fangji Gan

DOI: https://doi.org/10.3390/mi13081284

IF: 3.4

2022-01-01

Micromachines

Abstract:The aspheric light emitted from a pinhole restrains the reconstruction quality of a digital in-line hologram. Herein, the Fresnel-diffracted spot from the first step converging spherical wave diffracted at a rough circular aperture is collimated and expanded to generate an even plane wave, which is converged again by an objective lens and matching a minimum aperture while the central spot is varying from light to dark. We observed that the collected background hologram is filled with a round spot with high contrast as an ideal spherical wave. The resolution board and biology experimental results demonstrated a distinctively reconstructed image without any image processing in a single exposure. The adjustable field of view and magnification, single exposure, and noncontact make it suitable for an online microscope.
A Recording Structure for Extending the Detection Angle in Off-Axis Digital Holography

Yuanyuan Liu,Feiyan Hu,Qingwen Liu

DOI: https://doi.org/10.1109/jphot.2024.3502671

IF: 2.4

2024-12-07

IEEE Photonics Journal

Abstract:In digital holography, the sampling of the object wavefront is determined by the spatial resolution of the image sensors, which limits the angle range of the object wavefront. In this letter, we propose a recording structure for enlarging the detection angle in off-axis digital holography. Spatial angular multiplexing is realized by adding a small aperture in the object beam, and the spherical wave is employed as the reference light. The experiment result indicate that the new recording structure can achieve a range of 14.5 degrees, which exceeds four times the angular capacity of conventional optical path detection methods. This proposed angle-multiplexed recording technique has the potential to enhance the demand and applicability of large field of view measurements in digital holography.

engineering, electrical & electronic,optics,physics, applied
Resolution Enhancement of Optical Scanning Holography with a Spiral Modulated Point Spread Function

Ni Chen,Zhenbo Ren,Haiyan Ou,Edmund Y. Lam

DOI: https://doi.org/10.1364/prj.4.000001

IF: 7.6

2015-01-01

Photonics Research

Abstract:In optical scanning holography, one pupil produces a spherical wave and another produces a plane wave. They interfere with each other and result in a fringe pattern for scanning a three-dimensional object. The resolution of the hologram reconstruction is affected by the point spread function (PSF) of the optical system. In this paper, we modulate the PSF by a spiral phase plate, which significantly enhances the lateral and depth resolution. We explain the theory for such resolution enhancement and show simulation results to verify the efficacy of the approach.
Double field-of-view single-shot common-path off-axis reflective digital holographic microscope

Manoj Kumar,Takashi Murata,Osamu Matoba

DOI: https://doi.org/10.1063/5.0168452

IF: 4

2023-11-27

Applied Physics Letters

Abstract:Digital holography is a versatile three-dimensional imaging technique that has the ability to record the complex wave-front of an imaged object in two-dimensions and retrieve it in three-dimensions. Several technical challenges of digital holographic systems have been overcome by proposing single-shot acquisition and common-path configurations. However, the limited fiel-of-view (FOV) of digital holography is the most fundamental and technically challenging aspect of this technology. With this in mind, we have developed a digital holographic microscope (DHM) with a doubled FOV together with it leverages single-shot acquisition, common-path, and off-axis configuration and operates in the reflection mode. The double FOV is achieved by spatial frequency multiplexing of two different areas of the object beam by the use of a cube beam splitter. The common-path and off-axis configuration are obtained by employing a plate beam splitter just before the microscope objective. Several experiments are carried out, and the results are presented to demonstrate the validity and effectiveness of the proposed DHM for quantitative phase imaging of (semi) transparent and reflective objects. Based on the experimental results, the proposed microscope shows advanced performance in biomedical imaging as well as inspection of engineered surfaces with its simplicity, higher stability (temporal and mechanical), compactness, low cost, and most importantly double FOV capabilities.

physics, applied
Digital Off-Axis Holography With Angular Multiplexing And Synthetic Aperture

Wang Zhaomin,Qu Weijuan,Yang Fang,Wen Yongfu,Anand Asundi

DOI: https://doi.org/10.1117/12.2189442

2015-01-01

Abstract:This paper discusses conventional synthetic-aperture method combined angular multiplexing in digital holography to increase the resolution and to enlarge the field of view at the same time. A structured illumination is used to realize angular multiplexing. A camera is moved by a motorized x-y stage, and scanning is performed at imaging plane. In this way we extend the band-pass for single hologram recording as well as obtain a greater sensor area resulting in a larger numerical aperture (NA). A larger NA enables a more detailed reconstruction combined with a smaller depth of field. Moreover, a phase map of the object is experimentally presented.
High-resolution Section Recovery Using a Configurable Pupil in a Scanning Holographic Microscopy

Haiyan Ou,Kenneth K. Y. Wong,Edmund Y. Lam

DOI: https://doi.org/10.1364/srs.2014.sm4f.2

2014-01-01

Abstract:We present a sectioning method in optical scanning holography with enhanced depth resolution using a configurable pupil, which is based on spatial light modulator. A depth resolution of 0.7 μm can be achieved by this method.
Spatial heterodyne scanning laser confocal holographic microscopy

Changgeng Liu

DOI: https://doi.org/10.48550/arXiv.1610.03845

2016-10-12

Abstract:Scanning laser confocal holographic microscopy using a spatial heterodyne detection method is presented. Spatial heterodyne detection technique employs a Mach-Zehnder interferometer with the reference beam frequency shifted by two acousto-optic modulators (AOM) relative to the object beam frequency. Different from the traditional temporal heterodyne detection technique in which hundreds temporal samples are taken at each scanning point to achieve the complex signal, the spatial heterodyne detection technique generates spatial interference fringes by use of a linear tempo-spatial relation provided by galvanometer scanning in a typical line-scanning confocal microscope or for the slow-scanning on one dimension in a point-scanning confocal microscope, thereby significantly reducing sampling rate and increasing the signal to noise ratio under the same illumination compared to the traditional temporal heterodyne counterpart. The proposed spatial heterodyne detection scheme applies to both line-scanning and point-scanning confocal microscopes. In this paper, we present the mathematical principles of the spatial heterodyne detection method and experimental schemes for both line-scanning and point-scanning confocal microscopes. Computer experiments are provided to demonstrate the validity of this idea. The presented spatial heterodyne scanning laser confocal holographic microscope (SH-SLCHM) can obtain both amplitude and quantitative phase information of the object field without a significant increase in complexity of optical and electronic design on the basis of a traditional scanning laser confocal microscope (SLCM). SH-SLCHM may find applications in optical metrology, in-vivo tissue imaging, and ophthalmic imaging.

Instrumentation and Detectors,Optics
Stochastic Dual-Plane On-Axis Digital Holography Based on Mach–Zehnder Interferometer

Fengpeng Wang,Dayong Wang,Lu Rong,Yunxin Wang,Jie Zhao

DOI: https://doi.org/10.1117/12.2245141

2016-01-01

Abstract:For traditional dual-plane on-axis digital holography, the robustness is lower because it is difficult to maintain the stability of the phase difference between the object beam and the reference beam, and it may be invalid when the objects are on the surface of a medium with uneven thickness. An improved dual-plane digital holographic method based on Mach–Zehnder interferometer is presented to address these problems. Two holograms are recorded at two different planes separated by a small distance. Then, the zero-order image and conjugated image are eliminated by Fourier domain processing. In order to enhance the robustness of the system, the object is illuminated by a stochastic beam that is a speckle wave produced by a diffuser. Simulated and experimental results are shown to demonstrate that the proposed method has greater robustness than the traditional dual-plane on-axis digital holography and it can be used to imaging on the irregular surface of a transparent medium.
High-resolution long-working-distance reference-free holographic microscopy exploiting speckle-correlation scattering matrix

YoonSeok Baek,KyeoReh Lee,YongKeun Park

DOI: https://doi.org/10.1103/PhysRevApplied.10.024053

2018-02-28

Abstract:Using conventional refraction-based optical lens, it is challenging to achieve both high-resolution imaging and long-working-distance condition. To increase the numerical aperture of a lens, the working distance should be compensated, and vice versa. Here we propose and demonstrate a new concept in optical microscopy that can achieve both high-resolution imaging and long-working-distance conditions by utilising a scattering layer instead of refractive optics. When light passes through a scattering layer, it creates a unique interference pattern. To retrieve the complex amplitude image from the interference pattern without introducing a reference beam, we utilised a speckle-correlation scattering matrix method. This property enables holographic microscopy without any lens or external reference beam. Importantly, the proposed method allows high-resolution imaging with a long working distance beyond what a conventional objective lens can achieve. As an experimental verification, we imaged various microscopic samples and compared their performance with off-axis digital holographic microscopy.

Optics
Grating Based Wide Field-Of-View Digital Lens-Free Holography

Wenhui Zhang,Liangcai Cao,Hua Zhang,Hao Zhang,Guofan Jin

DOI: https://doi.org/10.1117/12.2295002

2018-01-01

Abstract:To make full use of the spatial bandwidth product of imaging systems, grating based single-shot digital lens-free holography with spatial spectrum multiplexing is proposed. Multiple object waves are generated by a one-dimensional grating which is placed in near contact with the object to avoid the crosstalk among different diffraction orders during reconstruction. A multiplexed off-axis hologram is created by interference between the object waves and reference wave and captured by an image sensor in one shot. Multiple imaging areas corresponding to the captured object waves can be simultaneously retrieved during reconstruction, which is equivalent to increase the imaging area. A formula which guarantees accurate full FOV imaging without crosstalk or information loss is presented. The imaging experiments of a USAF resolution target are presented to demonstrate the feasibility of this method.
Wide Field-of-view Microscope Based on Holographic Focus Grid Illumination.

Jigang Wu,Xiquan Cui,Guoan Zheng,Ying Min Wang,Lap Man Lee,Changhuei Yang

DOI: https://doi.org/10.1364/ol.35.002188

2010-01-01

Abstract:We have developed a new microscopy design that can achieve wide field-of-view (FOV) imaging and yet possesses resolution that is comparable to a conventional microscope. In our design, the sample is illuminated by a holographically projected light-spot grid. We acquire images by translating the sample across the grid and detecting the transmissions. We have built a prototype system with an FOV of 6 mm x 5 mm and acquisition time of 2.5 s. The resolution is fundamentally limited by the spot size--our demonstrated average FWHM spot diameter was 0.74 microm. We demonstrate the prototype by imaging a U.S. Air Force target and a lily anther. This technology is scalable and represents a cost-effective way to implement wide FOV microscopy systems.

Dual-spherical-wave optical scanning holographic microscopy with resolution enhancement and an extended depth of field

Depth resolution enhancement in double-detection optical scanning holography.

Enhanced Depth Resolution in Optical Scanning Holography Using a Configurable Pupil

Dual-wavelength slightly off-axis digital holographic microscopy.

Dual-wavelength Resolution Matching Digital Holographic Microscopy Using One Path Structured Illumination

High Resolution Digital Holographic Microscopy with A Wide Field of View Based on A Synthetic Aperture Technique and Use of Linear Ccd Scanning

Single-Shot Common-Path Off-Axis Dual-Wavelength Digital Holographic Microscopy Based on Two-Dimensional Grating Diffraction

Long-working-distance synthetic aperture Fresnel off-axis digital holography.

Off-axis Optical Scanning Holography [Invited].

High Resolution Digital Holography Based on the Point Source Scanning

Two-Step Converging Spherical Wave Diffracted at a Circular Aperture of Digital In-Line Holography

A Recording Structure for Extending the Detection Angle in Off-Axis Digital Holography

Resolution Enhancement of Optical Scanning Holography with a Spiral Modulated Point Spread Function

Double field-of-view single-shot common-path off-axis reflective digital holographic microscope

Digital Off-Axis Holography With Angular Multiplexing And Synthetic Aperture

High-resolution Section Recovery Using a Configurable Pupil in a Scanning Holographic Microscopy

Spatial heterodyne scanning laser confocal holographic microscopy

Stochastic Dual-Plane On-Axis Digital Holography Based on Mach–Zehnder Interferometer

High-resolution long-working-distance reference-free holographic microscopy exploiting speckle-correlation scattering matrix

Grating Based Wide Field-Of-View Digital Lens-Free Holography

Wide Field-of-view Microscope Based on Holographic Focus Grid Illumination.