Abstract:Laser‐induced secondary crystallization of a CsPbBr3 nanocrystals thin film is driven directly by laser irradiation. Robust green amplified spontaneous emission with a low threshold and a high net modal gain is achieved after the treatment due to the suppression of nonradiative recombination channels. This convenient laser treatment enables the fabrication of high‐quality CsPbBr3 perovskite thin films. All‐inorganic perovskite nanocrystals (NCs) have received extensive attention for next‐generation thin film devices due to their excellent optical properties, such as strong light absorption, high carrier mobility, and defect tolerance. However, significant challenges remain to obtain high‐quality perovskite thin films. Herein, a simple but effective post‐treatment by laser irradiation for CsPbBr3 NCs thin films is reported. Laser‐induced secondary crystallization is observed in CsPbBr3 NCs thin films after treatment. In addition, amplified spontaneous emission (ASE) with a low threshold (5.6 μJ cm−2) and a high gain value (743 cm–1) is achieved. Based on optical measurements, it is attributed to the low defect density, reduced Auger recombination, and weak exciton–phonon interactions, which greatly suppress the nonradiative recombination channels. The ASE from the film after treatment has a high characteristic temperature (134 K), showing a stable optical gain performance that maintains its intensity for 35 h at room temperature (and 12 h at 40 °C). Finally, the proof‐of‐concept demonstration of graphic coding is shown. This work deepens the understanding of the optical gain mechanism of CsPbBr3 perovskite films and provides a simple and convenient laser treatment that enables the fabrication of high‐quality CsPbBr3 perovskite thin films.

Solvent Recrystallization‐Enabled Green Amplified Spontaneous Emissions with an Ultra‐Low Threshold from Pinhole‐Free Perovskite Films

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

Solvent atmosphere-assisted crystallization of perovskites for room-temperature continuous-wave amplified spontaneous emission

Amplified Spontaneous Emission with a Low Threshold from Quasi‐2D Perovskite Films via Phase Engineering and Surface Passivation

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

High Optical Gain of Solution‐Processed Mixed‐Cation CsPbBr 3 Thin Films towards Enhanced Amplified Spontaneous Emission

Efficient Solid-State Electrochemiluminescence from High-Quality Perovskite Quantum Dot Films.

High Optical Gain of Solution‐Processed Mixed‐Cation CsPbBr3 Thin Films Towards Enhanced Amplified Spontaneous Emission

One-Step Co-Evaporation of All-Inorganic Perovskite Thin Films with Room-Temperature Ultralow Amplified Spontaneous Emission Threshold and Air Stability.

Laser‐Induced Secondary Crystallization of CsPbBr3 Perovskite Film for Robust and Low Threshold Amplified Spontaneous Emission

Highly Compact and Smooth All-Inorganic Perovskite Films for Low Threshold Amplified Spontaneous Emission from Additive-Assisted Solution Processing

Thin Film Stoichiometry and Defects Management for Low Threshold and Air Stable Near‐Infrared Perovskite Laser

Vacuum-Vapor-Deposited 0D/3D All-Inorganic Perovskite Composite Films Toward Low-Threshold Amplified Spontaneous Emission and Lasing.

Rapid Crystallization of All-Inorganic CsPbBr3 Perovskite for High-Brightness Light-Emitting Diodes

Linearly Manipulating Color Emission via Anion Exchange Technology for High Performance of Amplified Spontaneous Emission of Perovskites

Enhanced Optoelectronic Quality of Perovskite Films with Excess CH3NH3I for High-Efficiency Solar Cells in Ambient Air

In Situ Preparation of Metal Halide Perovskite Nanocrystal Thin Films for Improved Light-Emitting Devices

Low-threshold Stimulated Emission of Hybrid Perovskites at Room Temperature through Defect-Mediated Bound Excitons

Suppressing Defects‐Induced Nonradiative Recombination for Efficient Perovskite Solar Cells through Green Antisolvent Engineering

Unraveling the Ultrasonic-Assisted Synthesis of Green-Emitting CsPbBr3@Cs4PbBr6: Reaction Process, Luminescence Property, and Display Application

Localized bound multiexcitons in engineered quasi‐2D Perovskites grains at room temperature for efficient lasers