Abstract:Perovskite-type lead halides exhibit promising performances in optoelectronic applications, for which lasers are one of the most promising applications. Although the bulk structure has some advantages, perovskite has additional advantages at the nanoscale owing to its high crystallinity given by a lower trap density. Although the nanoscale can produce efficient light emission, its comparatively poor chemical and colloidal stability limits further development of devices based on this material. Nevertheless, bulk perovskites are promising as optical amplifiers. There has been some developmental progress in the study of optical response and amplified spontaneous emission (ASE) as a benchmark for perovskite bulk phase laser applications. Therefore, to achieve high photoluminescence quantum yields (PLQYs) and large optical gains, material development is essential. One of the aspects in which these goals can be achieved is the incorporation of a bulk structure of high-quality crystallization films based on inorganic perovskite, such as cesium lead halide (CsPb(Br/Cl)3), in polymethyl methacrylate (PMMA) polymer and encapsulation with the optimal thickness of the polymer to achieve complete surface coverage, prevent degradation, surface states, and surface defects, and suppress emission at depth. Sequential evaporation of the perovskite precursors using a single-source thermal evaporation technique (TET) effectively deposited two layers. The PL and ASEs of the bare and modified films with a thickness of 400 nm PMMA were demonstrated. The encapsulation layer maintained the quantum yield of the perovskite layer in the air for more than two years while providing added optical gain compared to the bare film. Under a picosecond pulse laser, the PL wavelength of single excitons and ASE wavelength associated with the stimulated decay of bi-excitons were achieved. The two ASE bands were highly correlated and competed with each other; they were classified as exciton and bi-exciton recombination, respectively. According to the ASE results, bi-exciton emission could be observed in an ultrastable CsPb(Br/Cl)3 film modified by PMMA with a very low excitation energy density of 110 µJ/cm2. Compared with the bare film, the ASE threshold was lowered by approximately 5%. A bi-exciton has a binding energy (26.78 meV) smaller than the binding energy of the exciton (70.20 meV).

Vacuum-Vapor-Deposited 0D/3D All-Inorganic Perovskite Composite Films Toward Low-Threshold Amplified Spontaneous Emission and Lasing.

Long-term Air-Stable Amplified Spontaneous Emission in Quasi-2D Perovskite Films Through Ligand Engineering

Low‐Threshold, External‐Cavity‐Free Flexible Perovskite Lasers

One-Step Co-Evaporation of All-Inorganic Perovskite Thin Films with Room-Temperature Ultralow Amplified Spontaneous Emission Threshold and Air Stability.

Amplified Spontaneous Emission with a Low Threshold from Quasi‐2D Perovskite Films via Phase Engineering and Surface Passivation

Linearly Manipulating Color Emission via Anion Exchange Technology for High Performance of Amplified Spontaneous Emission of Perovskites

Vapor‐Phase Deposition of Highly Luminescent Embedded Perovskite Nanocrystals

Solvent atmosphere-assisted crystallization of perovskites for room-temperature continuous-wave amplified spontaneous emission

High Optical Gain of Solution‐Processed Mixed‐Cation CsPbBr 3 Thin Films towards Enhanced Amplified Spontaneous Emission

High Optical Gain of Solution‐Processed Mixed‐Cation CsPbBr3 Thin Films Towards Enhanced Amplified Spontaneous Emission

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

Simple Approach to Improving the Amplified Spontaneous Emission Properties of Perovskite Films

Thin Film Stoichiometry and Defects Management for Low Threshold and Air Stable Near‐Infrared Perovskite Laser

Amplified Spontaneous Emission from waveguide based on Hybrid Quasi-2D Perovskite of Dion-Jacobson and Ruddlesden-Popper phases

Surface Passivation for Promotes Bi-Excitonic Amplified Spontaneous Emission in CsPb(Br/Cl)3 Perovskite at Room Temperature

Phase distribution management in quasi-2D perovskite films toward highly efficient amplified spontaneous emission pumped by nanosecond pulsed laser

Effect of phase distribution and defect passivation on amplified spontaneous emission of quasi-2D Dion–Jacobson perovskite

Lead-free Cs3Cu2I5 perovskite vertical cavity surface emitting lasers with low threshold

Improved Amplified Spontaneous Emission in Polycrystalline Perovskite Films by the Dual‐Site Synergistic Passivation Effects of ZnS

High-performance amplified spontaneous emission in inorganic CsPbBr3 perovskite thin films grown on engineered quartz substrates

A Photonic Crystal Laser from Solution Based Organo-Lead Iodide Perovskite Thin Films