Abstract:Perovskite-type lead halides exhibit promising performances in optoelectronic applications, for which lasers are one of the most promising applications. Although the bulk structure has some advantages, perovskite has additional advantages at the nanoscale owing to its high crystallinity given by a lower trap density. Although the nanoscale can produce efficient light emission, its comparatively poor chemical and colloidal stability limits further development of devices based on this material. Nevertheless, bulk perovskites are promising as optical amplifiers. There has been some developmental progress in the study of optical response and amplified spontaneous emission (ASE) as a benchmark for perovskite bulk phase laser applications. Therefore, to achieve high photoluminescence quantum yields (PLQYs) and large optical gains, material development is essential. One of the aspects in which these goals can be achieved is the incorporation of a bulk structure of high-quality crystallization films based on inorganic perovskite, such as cesium lead halide (CsPb(Br/Cl)3), in polymethyl methacrylate (PMMA) polymer and encapsulation with the optimal thickness of the polymer to achieve complete surface coverage, prevent degradation, surface states, and surface defects, and suppress emission at depth. Sequential evaporation of the perovskite precursors using a single-source thermal evaporation technique (TET) effectively deposited two layers. The PL and ASEs of the bare and modified films with a thickness of 400 nm PMMA were demonstrated. The encapsulation layer maintained the quantum yield of the perovskite layer in the air for more than two years while providing added optical gain compared to the bare film. Under a picosecond pulse laser, the PL wavelength of single excitons and ASE wavelength associated with the stimulated decay of bi-excitons were achieved. The two ASE bands were highly correlated and competed with each other; they were classified as exciton and bi-exciton recombination, respectively. According to the ASE results, bi-exciton emission could be observed in an ultrastable CsPb(Br/Cl)3 film modified by PMMA with a very low excitation energy density of 110 µJ/cm2. Compared with the bare film, the ASE threshold was lowered by approximately 5%. A bi-exciton has a binding energy (26.78 meV) smaller than the binding energy of the exciton (70.20 meV).

Long-term Air-Stable Amplified Spontaneous Emission in Quasi-2D Perovskite Films Through Ligand Engineering

Quasi‐CW Amplified Spontaneous Emission in Air‐Processed Quasi‐2D Perovskite Thin Films with High Stability

Ultrastable and high-performance amplified spontaneous emission in centimeter-scale inorganic CsPbBr3 single-crystal thin films

High Stability and Ultralow Threshold Amplified Spontaneous Emission from Formamidinium Lead Halide Perovskite Films

Ultrastable CsPbBr Perovskite Quantum Dot and Their Enhanced Amplified Spontaneous Emission by Surface Ligand Modification.

One-Step Co-Evaporation of All-Inorganic Perovskite Thin Films with Room-Temperature Ultralow Amplified Spontaneous Emission Threshold and Air Stability.

Amplified Spontaneous Emission with a Low Threshold from Quasi‐2D Perovskite Films via Phase Engineering and Surface Passivation

Enhanced amplified spontaneous emission performance through effective regulation of phase distribution in Ruddlesden-Popper perovskite films

Enhanced Amplified Spontaneous Emission from All‐Inorganic Perovskite Thin Films by Composition Engineering

Simple Approach to Improving the Amplified Spontaneous Emission Properties of Perovskite Films

Air-Stable Surface-Passivated Perovskite Quantum Dots for Ultra-Robust, Single- and Two-Photon-Induced Amplified Spontaneous Emission.

Amplified Spontaneous Emission Properties of Solution Processed CsPbBr3 Perovskite Thin Films Doped with Large-Group Ammonium Cations

Highly stable enhanced near-infrared amplified spontaneous emission in solution-processed perovskite films by employing polymer and gold nanorods

Super air stable quasi-2D organic-inorganic hybrid perovskites for visible light-emitting diodes.

Linearly Manipulating Color Emission via Anion Exchange Technology for High Performance of Amplified Spontaneous Emission of Perovskites

Surface Passivation for Promotes Bi-Excitonic Amplified Spontaneous Emission in CsPb(Br/Cl)3 Perovskite at Room Temperature

Air Stable Organic–Inorganic Perovskite Nanocrystals@Polymer Nanofibers and Waveguide Lasing

Stable, Low-Threshold Amplification Spontaneous Emission of Blue-Emitting CsPbCl2Br1 Perovskite Nanocrystals Glasses with Controlled Crystallization

High-performance amplified spontaneous emission in inorganic CsPbBr3 perovskite thin films grown on engineered quartz substrates

Mixing Dion–Jacobson and Ruddlesden–Popper Structures in Quasi‐2D Perovskite Films for Thermal‐ and Photo‐Stable Stimulated Emission

Stabilizing Single‐Source Evaporated Perovskites with Organic Interlayers for Amplified Spontaneous Emission