Analyses Of Cryogenic Propellant Tank Pressurization Based Books Read

Abstract:The use of filament-wound fiber-glass liquid-hydrogen propellant tank structures should result in a considerable weight savings compared to conventional metal tanks providing that a suitable internal liner can be developed. This report investigates the use of plastic tape liners bonded to the inner surface of the filament-wound structure. The compatibility of liners, made of Teflon and Mylar tape, with respect to the filament-wound shell was studied experimentally using liquid hydrogen and theoretically using an analytical technique derived in this report. The investigation shows for bonded liners used at the temperature of liquid hydrogen (normal boiling point 20 deg K) that Teflon is incompatible with the filament-wound structure and Mylar is limited. Advances in Heat Transfer Stored gas pressurization and boost pump liquid rocket engine propellant transfer systems were investigated to compare their suitability for use on hydrogen-oxygen upper stage vehicles. The purpose of this document is to present the results of this study and to describe the method of analysis used. System comparisons were based on the overall system weight. The mission duty cycle, NPSH, propellant weight, and propellant type were held constant. Results indicated that liquid transfer with boost pumps will provide a minimum system weight for the selected baseline configuration and ground rules. For stored gas pressurization, it was determined that storage of the gas bottle should be in the hydrogen tank with the pressurant
Materials Science,Engineering
What problem does this paper attempt to address?