Abstract:For ultra-light geopolymer foam, it is challenging to maintain excellent mechanical properties and foaming stability while continuously reducing the density. In this study, basalt fibers (BF) and hollow microspheres (HM) were used to prepare a basalt fiber-reinforced metakaolin (MK)-based geopolymer foam (FRGF) and the workability, microstructure, physical properties, high-temperature performance, and shrinkage characteristics were systematically investigated. Results indicate that incorporating 50% HM into FRGF significantly reduces the fluidity by 31.2% and reaction rate of the geopolymer paste, slows down the decomposition rate of hydrogen peroxide, and enhances the stability of the foaming process. Additionally, the incorporation of HM increases the total porosity of the FRGF from 75.4% to 86.3%, lowers the bulk density from 0.42 g/cm3 to 0.34 g/cm3, and decreases the thermal conductivity to 0.0681 W/(m & sdot;K). Concurrently, the introduction of BF significantly enhances the mechanical properties of FRGF, with a 28-day compressive strength reaching 2.49 MPa. After treatment at 1000 celcius, the FRGF transformed from an amorphous gel structure to a crystalline structure. The sintering between BF and the matrix notably enhances the performance of interfacial transition zone (ITZ), further increasing the energy absorption capability and decreasing the linear shrinkage of FRGF at high temperatures (1000 degrees C) by 55.2%. In conclusion, 50% HM and 0.6% BF demonstrated superior mechanical properties, thermal insulation, and high-temperature performance. It offers a strategy to resolve the contradiction between the density, mechanical performance, and stability of geopolymer foams and has potential applications in the field of high-temperature insulation.

Preparation and fireproofing performance of the wollastonite-metakaolin-based geopolymer foams

Fire Resistance of Alkali Activated Geopolymer Foams Produced from Metakaolin and Na2O2

Fabrication and Fireproofing Performance of the Coal Fly Ash-Metakaolin-Based Geopolymer Foams

Preparation of metakaolin-fly ash cenosphere based geopolymer matrices for passive fire protection

Synthesis of metakaolin-based geopolymer foamed materials using municipal solid waste incineration fly ash as a foaming agent

Physical and High Temperature Properties of Basalt Fiber-Reinforced Geopolymer Foam with Hollow Microspheres

Preparation and properties of geopolymeric foaming materials

Thermal insulation performance of rock wool reinforced kaolinite-based porous geopolymer

Influence of direct foaming methods on the early performance and microstructure of metakaolin‐based foam geopolymers

Elucidating the effects of silicon carbide sludge and waste glass fiber on the characteristics of porous eco‐fireproof materials

Enhancement of wollastonite on flame retardancy and mechanical properties of PP/IFR composite

Synthesis and Characterization of Novel Hybrid Wollastonite-Metakaolin-Based Geopolymers

Study on the Reinforced Properties of Geopolymer Fibers with a Sustainable Development Role

Preparation and electromagnetic wave absorption characteristics of multifunctional light-weight high titanium slag-based foam geopolymer

Determination of the Influence of Hydraulic Additives on the Foaming Process and Stability of the Produced Geopolymer Foams

Preparation and properties of metakaolin-fumed-silica geopolymer modified with sodium silicate and potassium silicate activators

Microstructure and mechanical properties of metakaolin-based geopolymer composites containing high volume of spodumene tailings

Mechanical properties and mechanism of wollastonite fibers reinforced oil well cement

A novel synthesis of lightweight and high-strength green geopolymer foamed material by rice husk ash and ground-granulated blast-furnace slag

Effect of Waste Glass Powder and Bamboo Fiber on the Physico-Mechanical Properties and High-Temperature Behavior of a Fly Ash-Based Geopolymer