Abstract:With the development of ultra-precision machining technology, parts with microstructures on the surface are playing an increasingly important role in engineering practice. The scanning interference microscope measurement method is widely used in the measurement of microscopic surface topography. This paper proposes a method of interference microscopy combined with subaperture stitching. The first step is to divide and measure the sub-aperture. There is a partial overlap area between the divided adjacent subapertures. The white light interferometer measures each sub-aperture in turn. The second step is edge feature detection. There are highly steep edge features between the bottom of the groove and the surface of the surface microgroove. The stitching algorithm detects edge features by detecting the slope threshold of the sub-aperture. The third step is to correct the abscissa. Project the detected edge feature data onto the OXY plane to generate a 2D data set. The multi-dimensional motion scanning platform inevitably has motion errors in the measurement process, so the edge characteristic curves of adjacent sub-apertures have obvious lateral displacement in the overlapping area. The lateral displacement and angle of the lateral coordinate of each sub-aperture are corrected by the least square method. The fourth step is the height coordinate correction. The stitching algorithm minimizes the height difference between the corresponding points in the overlapping area, and solves it with a linear least squares problem model. We have completed the measurement of the fringe pattern on the computer-generated hologram (CGH) substrate and the complete topography of the long groove on the 10mm hemisphere. After the sub-aperture global iterative stitching algorithm, there is no stitching trace in the simulation result. For the long groove on the hemisphere, we designed a four-dimensional scanning motion platform and a special fixture to ensure that the long groove on the hemisphere rotates around an axis perpendicular to the geodesic line. The center of the white light interference fringe is always at the center of the long slot aperture.

Stitching accuracy in large area Scanning Probe Microscopy

Error Analysis of Spherical Scanning Mechanism Used for Surface Defects Detection

Remote Sensing Image Stitch Using Modified Structure Deformation

Elimination of reference surface error on high-accuracy subaperture stitching

Influence of Alignment Error and Random Noise on Interferometry Flat Sub-Aperture Stitching

Studies on Image Stitching Algorithms in Machine Vision Inspection of Solar Panel

A Stitching Method for AFM Based Large Scale Scanning with High Resolution

Blurring and lens distortion free scanning for large area painting and calligraphy

Large-Scale and Non-Contact Surface Topography Measurement Using Scanning Ion Conductance Microscopy and Sub-Aperture Stitching Technique

Technology of Sub-Aperture Stitching Based on Mapping Image Matching

Improved accuracy and speed in scanning probe microscopy by image reconstruction from non-gridded position sensor data

Two-dimensional Stitching Interferometry for Self-Calibration of High-Order Additive Systematic Errors

DistortCorrect Stitcher: Microscopy Image Stitching with Integrated Optical Distortion Correction

Nonholonomic spherical stitching measurement method for large-aperture angles based on differential confocal precise surface fixation

Image stitching algorithm for super-resolution localization microscopy combined with fluorescence noise prior

High-resolution white light scanning stitching measurement of full-surface microstructure

vEMstitch: an algorithm for fully automatic image stitching of volume electron microscopy

A novel multi-view X-ray digital imaging stitching algorithm

Sub-aperture Stitching of Aspheric Surfaces in Precision In-Situ Measurement

In-situ Sub-Aperture Stitching Measurement Based on Monoscopic Phase Measuring Deflectometry

Principle and Simulation of Correlation Steered Scanning for Spm to Overcome Thermal Drift