Effects of an incoming vortex on the film cooling jet

Qiuyin Wang,Mostafa Moosania,Chao Zhou

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.122323

IF: 5.2

2022-04-01

International Journal of Heat and Mass Transfer

Abstract:In a high pressure turbine, film cooling is applied to protect the blades and endwalls from the high temperature main flow. The horseshoe and passage vortex near the endwall can significantly affect the film cooling performance and lead to a detrimental consequence for certain holes. In this study, large eddy simulations (LES) and laser-induced fluorescence (LIF) experiments were conducted to investigate the effects of the incoming vortex on the flow physics and cooling performance of a film cooling jet. Two cases with the incoming vortex passing from different sides of the cooling hole were compared with the baseline case with the uniform incoming flow. The time-averaged results showed that two cases with incoming vortex have more than three times variation in the film cooling effectiveness due to the downwash and upwash effects of the incoming vortex. The analysis based on the instantaneous flow field provides more insight into the flow physics and cooling mechanism. The instantaneous flow field showed that the incoming vortex changes the shape and the distributions of the coherent structures, which affects the mixing and surface area covered by the coolant and hence the cooling effectiveness. The norm of turbulent heat flux was found to better illustrate the mixing process between the main flow and the coolant due to the transportation and breakdown of the coherent structures. In addition, the cases with different vortex strengths were also studied to find the degree of improvement of film cooling effectiveness.

engineering, mechanical,thermodynamics,mechanics