Abstract:The efficacy of steady large-amplitude blowing/suction on instability and transition control for a hypersonic flat plate boundary layer with Mach number 5.86 is investigated systematically. The influence of the blowing/suction flux and amplitude on instability is examined through direct numerical simulation and resolvent analysis. When a relatively small flux is used, the two-dimensional instability critical frequency that distinguishes the promotion/suppression mode effect closely aligns with the synchronisation frequency. For the oblique wave, as the spanwise wavenumber increases, the suppression effects would become weaker and the mode suppression bandwidth diminishes/increases in general in the blowing/suction control. Increasing the blowing/suction flux can effectively broaden the frequency bandwidth of disturbance suppression. The influence of amplitude on disturbance suppression is weak in a scenario of constant flux. To gain a deeper insight into disturbance suppression mechanism, momentum potential theory (MPT) and kinetic energy budget analysis are further employed in analysing disturbance evolution with and without control. When the disturbance is suppressed, the blowing induces the transport of certain acoustic components along the compression wave out of the boundary layer, whereas the suction does not. The velocity fluctuations are derived from the momentum fluctuations of the MPT. Compared with the momentum fluctuations, the evolutions indicated by each component's velocity fluctuations greatly facilitate the investigations of the acoustic nature of the second mode. The rapid variation of disturbance amplitude near the blowing is caused by the oscillations of the acoustic component and phase speed differences between vortical and thermal components. Kinetic energy budget analysis is performed to address the non-parallel effect of the boundary layer introduced by blowing/suction, which tends to suppress disturbances near the blowing. Moreover, viscous effects leading to energy dissipation are identified to be stronger in regions where the boundary layer is rapidly thickening. Finally, it is demonstrated that a flat plate boundary layer transition triggered by a random disturbance can be delayed by a blowing/suction combination control. The resolvent analysis further demonstrates that disturbances with frequencies that dominate the early transition stage are dampened in the controlled base flow.

State Of Art And Prospects Of Investigating The Possibility Of Turbulent Boundary Layer Control By Air Blowing On A Body Of Revolution (Review)

Boundary-layer control on a body of revolution with a large aspect ratio by means of distributed air blowing

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Numerical Study of Active Shock Control for Transonic Aerodynamics

A Review of Flow Control Strategies for Supersonic/Hypersonic Fluid Dynamics

An exactly solved model of biological evolution

Drag Reduction of Blowing-Based Active Control in a Turbulent Boundary Layer

Effects of Temperature on Drag Reduction in a Subsonic Turbulent Boundary Layer Via Micro-Blowing Array

Numerical Investigation of Boundary Layer Separation Control on the Low-Pressure Turbine Blade by Oscillatory Blowing

Investigation of Practical Flow Control Methodologies with RANS/LES Hybrid Methods

Numerical simulation of a laminar-turbulent flow past a swept wing under the action of a blowing or suction source

Numerical Study of Flow Control to Increase Vertical Tail Effectiveness of an Aircraft by Tangential Blowing

Numerical Investigation on the Evolution Process of Different Vortex Structures and Distributed Blowing Control for Dynamic Stall Suppression of Rotor Airfoils

Instability and Transition Control by Steady Local Blowing/suction in a Hypersonic Boundary Layer

Controlling Transonic Shock-Boundary Layer Interactions over A Natural Laminar Flow Airfoil by Vortical and Thermal Excitation

Abstract Submitted for the DFD16 Meeting of The American Physical Society Control of Flow Structure on Non-Slender Delta Wing: Bio- inspired Edge Modifications, Passive Bleeding, and Pulsed Blowing

Effects of Leading-Edge Blowing Control and Reduced Frequency on Aerofoil Aerodynamic Performances

A review of recent developments in flow control

Experimental Study on the Effect of Boundary Layer Control on the Aerodynamics Characteristics of NACA 0021 Aerofoil

Experimental and Numerical Investigation of Porous Bleed Control for Supersonic/Subsonic Flows, and Shock-Wave/Boundary-Layer Interactions

THE INSTABILITY AND CONTROL OF COMPRESSIBLE CROSS FLOWS