Abstract:Purpose: We recently demonstrated the feasibility of generating high current and high energy x-ray radiation using field emitted electrons from the carbon nanotubes (CNTs). The purpose of the present work is to develop a spatially distributed multiple beam x-ray array technology for stationary tomography imaging, including digital breast tomosynthesis, with the goal of increasing the spatial resolution and scanning speed. Method and Materials: CNT cathodes fabricated by patterned electrophoretic deposition were used as the field emission electron source for x-ray generation. Computer simulations and experimental measurements were carried out to design the electrostatic lens to focus the field emitted electrons to the predetermined area on the metal anode. Finite element analysis was performed to determine the anode heat load under the desired operation conditions. Spatially distributed x-ray source arrays with one- and two-dimensionally distributed focal spots were constructed using matrix addressable multi-pixel CNT cathode, and corresponding focusing and anode structures. By varying the extraction electrical field, x-ray radiation with programmable waveform was readily generated which can be gated with external triggers such as physiological signals with sub-microsecond response time. Dedicated control electronics were designed and manufactured to switch, scan, and regulate the x-ray beams. Results: Several spatially distributed field emission x-ray source arrays with different configurations and performance parameters have been fabricated and characterized for different imaging systems. Stable operation at anode voltage up to 160kVp has been achieved. Through improvement of the CNT cathode and electronic regulation beam-to-beam consistency in intensity and focal spot size has been demonstrated. A dedicated x-ray source array has been designed and fabricated for stationary digital breast tomosynthesis. The source comprises 31 individually controllable x-ray beams covering 30 degrees viewing angle, allowing collection of the all the projection images from different angles without any mechanical motion blur. It is operated up to 50KVp anode voltage at an effective focal size comparable to that of the traditional mammography tube. Tomosynthesis images of a breast phantom were obtained using the new source array and a flat-panel x-ray detector. Conclusion: The distributed field emission x-ray source array technology offers unique capabilities that are attractive for tomography imaging and potentially for radiotherapy. The flexibility in source configuration opens up new possibilities in system design. Conflict of Interest: Zhou is a board director of XinRay Systems which develops and commercializes the CNT X-Ray source technology.

Tetrahedron beam imaging with a multi‐pixel thermionic emission X‐ray source and a photon‐counting detector: A benchtop experimental study

Radiographic Imaging with a Linear X-Ray Source and Multi-Row Detector

WE-E-201B-02: Development of a Tetrahedron Beam Computed Tomography Benchtop System with a 75 Pixel Field Emission X-Ray Tube: System Setup and Performance Evaluation

TU‐E‐110‐04: Tetrahedron Beam Computed Tomography

SU-DD-A4-05: Development of a Tetrahedron Beam Computed Tomography Benchtop System with a 75 Pixel Field Emission X-Ray Tube: Collimator Design and Image Reconstruction

Tri-directional X-Ray Phase Contrast Multimodal Imaging Using One Hexagonal Mesh Modulator.

Photon counting computed tomography: Concept and initial results

New X-ray Fluorescence CT (XFCT) System Using Multi-beam X-ray Source

Triple-source Saddle-Curve Cone-Beam Photon Counting CT Image Reconstruction: A Simulation Study.

Monte Carlo Simulation for Polychromatic X-ray Fluorescence Computed Tomography with Sheet-Beam Geometry

SU‐CC‐J‐6C‐07: Helical Cone‐Beam CT for Radiation Therapy

TU-E-110-02: Multibeam X-Ray Source Array Based on Carbon Nanotube Field Emission

Thomson Scattering X-ray Source: a Novel Tool for Monochromatic Computed to Mography

A carbon nanotube x-ray source array designed for a new multisource cone beam computed tomography scanner

Rectangular Computed Tomography Using A Stationary Array of Cnt Emitters: Initial Experimental Results

Narrow beam breast CT: proof-of-concept

High-energy High-Dose Microfocus X-ray Computed Tomography Driven by High-Average-current Photo-Injector.

Evaluation of conventional imaging performance in a research whole-body CT system with a photon-counting detector array

Stationary Computed Tomography for Space and other Resource-constrained Environments

Cone-beam x-ray luminescence computed tomography (CB-XLCT) prototype development and performance evaluation

Pencil Beam Based X-ray Luminescence Computed Tomography Imaging of Deep Targets Three-dimensionally and Quantitatively