Abstract:In this work, a polymer precursor was first synthesized using p-terphenyl (TP) and terephthaloyl chloride (TC) as monomers. Then, cross-linking was realized by means of a Schiff base reaction with melamine (MA) as a modifier to obtain an amine-functionalized porous organic polymer TP-TC-MA. The synthesized polymers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and point of zero charge (pHpzc) measurements, as well as on the basis of nitrogen adsorption-desorption isotherms. Adsorption experiments were carried out to evaluate the adsorption properties of TP-TC-MA for methyl orange (MO), a typical anionic azo dye that has widespread industrial application. The amount of MO adsorbed on TP-TC-MA was evaluated by ultraviolet-visible (UV-Vis) spectroscopy at a wavelength of 463 nm. Microscopic analysis revealed that the as-synthesized polymer had an aggregated particle-shaped structure. XRD spectra confirmed that TP-TC-MA was an amorphous polymer, consistent with the results of high-resolution TEM experiments. The Brunauer-Emmett-Teller (BET) specific surface area and total pore volume of TP-TC-MA were determined as 708.5 m 2/g and 0.556 cm3/g, respectively. The measured pHpzc of TP-TC-MA was 4.0, probably because of the abundant nitrogen-containing groups provided by MA. The factors affecting adsorption, such as pH, adsorbent dosage, contact time, initial pollutant concentration, and ionic strength, were investigated. Because of the protonation of the N-atom in TP-TC-MA, the pH had a strong impact on the adsorption of MO. The removal efficiency could be maximized at the optimized pH of 3.0. The adsorption equilibrium isotherm, measured at 25 ℃ and a concentration of 50-500 mg/L, showed that the MO adsorption over TP-TC-MA followed the Langmuir isotherm, with a maximum adsorption capacity of 156.3 mg/g. The modeling of the experimental adsorption data was consistent with the pseudo-second-order kinetic model, which indicated fast adsorption and chemisorption as the dominant mechanism. With increasing ionic strength, the adsorption of MO slightly decreased, suggesting a partial antagonistic ion effect. Results of the selectivity study revealed that TP-TC-MA was more selective toward MO than methylene blue (MB), which indicated that electrostatic interactions played a significant role during the adsorption progress. Five adsorption-desorption cycles showed that TP-TC-MA could be regenerated without significant deterioration of its adsorption efficiency, indicating that it has good stability and reusability. The observed adsorption performance indicated that this MA-modified porous organic polymer offers prospects for further research and application in the treatment of dye-containing wastewaters.

Fabrication of SiO2 modified biobased hydrolyzed hollow polymer particles and their applications as a removal of methyl orange dye and bisphenol-A

Novel Ricinoleic Acid Highly Functionalized Hierarchical SiO2 with Switchable Superwettability for Removal of Oils, Heavy Metal Ions, and Organic Dyes from Water

Limonene‐derived Hollow Polymer Particles: Preparation and Application for the Removal of Dyes and Heavy Metal Ions

Fabrication of carboxylic functionalized poly(methacrylic acid 2-(tert-butylamino)ethyl ester)-coated mesoporous silica nanoparticles and their application for removing ionic dyes from polluted water

Facile synthesis of novel bi-heteroatom functionalized hyper-crosslinked porous polymers with efficient adsorption of methylene blue and methyl orange

Marrying the Mussel Inspired Chemistry and Kabachnik–Fields Reaction for Preparation of SiO2 Polymer Composites and Enhancement Removal of Methylene Blue

[Preparation of melamine-functionalized porous organic polymer and its adsorption properties for methyl orange]

Sodium alginate hydrogel encapsulated trans-anethole based polymer: Synthesis and their applications as an eradicating of metals and dye from wastewater

Preparation of Polymeric Silica Composites Through Polydopamine-Mediated Surface Initiated ATRP for Highly Efficient Removal of Environmental Pollutants

Biomimetic surface functionalization of SiO2 microspheres with catecholamine-containing poly(itaconic acid) for removal of cationic dye

Mussel Inspired Preparation of Functional Silica Nanocomposites for Environmental Adsorption Applications

Green synthesis of magnetic azo-linked porous organic polymers with recyclable properties for enhanced Bisphenol-A adsorption from aqueous solutions

Removal of bisphenol A by adsorption mechanism using PES-SiO2 composite membranes

Polyethersulfone-Modified Montmorillonite Hybrid Beads for the Removal of Bisphenol A

Lignosulfonate-Based Hybrid Hydrogels Functionalized with Hyperbranched Polyamide Amine as Ultra-High-Capacity Adsorbent for Congo Red Removal from Aqueous Solutions

Synthesis of hypercross-linked hybrid polyanilines from hollow spherical polyaniline and octavinylsilsesquioxane and its dye adsorption performance

Biomass furfural-derived green polymer microspheres: Synthesis and applications for the removal of environmental pollutants from wastewater

Engineered MXene/Bi2S3 nanoflowers in sodium alginate hydrogel: A synergistic eradicator of disinfected byproducts in aqueous environment

PDA@UiO-66-NH 2 -derived nitrogen and oxygen-doped hierarchical porous carbon for efficient adsorption of BPA and dyes

Super-Adsorbent Material Based on Functional Polymer Particles with A Multilevel Porous Structure

Heavy metal and organic dye removal via a hybrid porous hexagonal boron nitride-based magnetic aerogel